Compact and versatile, the Radial SW4 is the perfect tool for quick and noiseless switching between two balanced signals. With intuitive front panel controls, each of the four channels features XLR inputs and transformer-isolated outputs, eliminating any hum or buzz caused by ground loops.

For enhanced flexibility, adjacent channels can be linked together for stereo 3-way or even 4-way switching, and multiple SW4s can be used together for larger systems. Additionally, the SW4 can be easily converted for use with guitars with its dedicated 1/4 outputs and top-mounted mono switch.

The SW4 can handle signals up to +20dB at all frequencies without distortion, making it ideal for use with high-output sources and systems. It also features PFL switches and a built-in high-performance headphone amplifier, allowing you to monitor any channel at any time for consistent playback. If you’re looking for a powerful, flexible, and intelligent switching solution for live performances and concert applications, the SW4 is the ultimate choice.

To learn more about the Radial SW4, click here.

Reviews:
“Radial have thought long and hard about making the unit fool resistant, and frankly I think they’ve done a great job!” – CX Magazine SW4 Review.

Features:
– Four-channel balanced audio switcher designed for multiple mixing consoles or wireless systems.
– Provides operational flexibility and backup capabilities in live-performance or concert settings.
– Each channel is equipped with XLR inputs and transformer-isolated outputs to eliminate hum and buzz.
– Channels can be linked together for simultaneous switching.
– Channel 1 features an A+B mix function that sums both inputs together.
– PFL switches and headphone outputs for monitoring any channel.
– Dedicated activation/mute switch and LED indicator for each channel.
– Recessed bus send switch for sending the output of the channel to the master bus.
– Separate recessed trim controls for matching A and B inputs.
– Signal Presence LEDs provide visual feedback.
– Single-switch muting and activation of the master bus outputs.
– Headphone output with adjustable level.
– Locking XLR power input for reliable connection.
– Remote footswitch inputs for additional control (footswitch not included).
– XLR and 1/4 master bus outputs.
– Legendary Radial construction for durability and reliability.

Specifications:
– Audio Circuit Type: Passive transformer-coupled with relay-switching.
– Transformer: Eclipse ET-LD2 line output.
– Number of Channels: 4 x AB select.
– Frequency Response: 10Hz – 40kHz.
– Dynamic Range: 136dB.
– Gain: -0.26dB with 10k Ohm load, -2.3dB with 600 Ohm load (Channel to Channel gain), +8dB with 10k Ohm load (Channel to Bus gain).
– Total Harmonic Distortion: 0.002 percent.
– Intermodulation Distortion: 0.01 percent.
– Phase Deviation.
– Input Impedance: Load impedance in parallel with 10K.
– Output Impedance: Channel: 160 Ohms, Bus: 500 Ohms.
– Maximum Input: Channel to Channel: +26dBu, Channel to Bus: +17dBu.
– Input Connectors: XLR female.
– Output Connectors: XLR male, 1/4 guitar.
– Construction: 14-gauge steel chassis and outer shell.
– Power Supply: External 100V – 240V AC with 48V Phantom power.
– Conditions: For use in dry locations only between 5°C and 40°C.
– Product Code: R800-8110-00.

The post Radial SW4 4-Channel Audio Switcher appeared first on Onthedex.

The Radial SW8-USB is a USB enabled redundant backup auto-switching interface. It is designed to alleviate any worries during live performances. This tool is especially useful for performances that rely on backing tracks, as the Radial SW8-USB seamlessly switches between inputs upon detecting a dropout. With the optional JR-2 footswitch, you can also manually switch between inputs.

The SW8-USB features dual high-performance USB inputs, allowing two separate systems to connect simultaneously. It can be easily used as either an audio or MIDI interface for DAWs. Additionally, with MTC synchronization, your playback systems can start and stop in perfect time.

You can be confident knowing that the Radial SW8-USB Auto-Switcher and USB Interface will help you put on the best shows of your life. However, it’s important to note that the SW8 runs exclusively on MAC operating systems and is not compatible with Windows.

For more information, you can visit the link provided: More info…

Features:
– Easily switch between redundant playback systems
– 2 USB ports with 24-bit/192kHz converters eliminate the need for additional audio interface
– 8 channels of high-quality audio
– Manual or seamless automatic switching
– Line-level and transformer-isolated mic level outputs
– Synchronize both playback systems using MTC
– All-in-one backing track solution

Specifications:
– Computer Connectivity: USB 2.0
– Form Factor: Rackmount
– Analog Outputs: 8 x 1/4″, 1 x DB-25, 8 x XLR
– MIDI I/O: In/Out
– USB: 2 x Type B
– Other I/O: 1 x XLR (JR-2 footswitch), 1 x 1/4″ (JR-2 in), 1 x 1/4″ (alarm)
– Compatibility: MTC Synchronization
– OS Requirements – Mac: macOS 10.12 or later
– Rack Spaces: 1U
– Power Supply: External Power Supply Dual 4-pin Connectors
– Product Code: R800-8101-00

The post Radial SW8-USB Auto-Switcher and USB Interface appeared first on Onthedex.

The Radial Backtrack Stereo Audio Switcher is a versatile device that allows you to easily switch between two separate stereo sources. It features 1/4 TRS and 3.5mm stereo inputs, as well as 1/4 TRS and XLR outputs, making it compatible with a wide range of input and output sources. The XLR outputs are transformer isolating, eliminating any buzz and hum from ground loops. They also include a ground lift switch to further reduce noise. The device uses an A/B switch to choose between stereo inputs, and you can even connect a JR-2 remote for remote switching.

In addition to the switching capabilities, the Backtrack has a mute switch and a dedicated headphone output with its own level control and input selector switch. This allows you to silently monitor and check both sources without affecting the outputs on stage. The Backtrack is built to withstand the demands of stage and tour use, making it suitable for a wide variety of applications.

For more information about the Radial Backtrack Stereo Audio Switcher, click here.

Features:
– Intuitive switching between two stereo backing track sources on stage
– Easily connect playback devices with the 1/4 and 3.5mm TRS jack inputs
– Dedicated headphone output with level control and input select for silently cueing up tracks
– Transformer isolated main outputs to eliminate buzz and hum
– Ground lift switches to further reduce noise
– Switch inputs remotely with a JR-2 remote (not included, available separately)
– A/B switch determines which stereo input to use
– Ideal switching system for redundant playback devices where reliability and portability are crucial
– Perfectly suited to a wide variety of applications

Specifications:
– Audio Circuit Type: Passive audio circuit with active headphone amplifier
– Number of Channels: 2
– Frequency Response: 20Hz – 20kHz (-0.5dB / +0.5dB)
– Dynamic Range: >+130dB
– Total Harmonic Distortion: 0.007 percent at 0dBu 1kHz
– Intermodulation Distortion: 0.02 percent at 0dBu 1kHz
– Common Mode Rejection Ratio: 34dBu at 60Hz, 42dBu at 3kHz
– Noise: -105dBu
– Maximum Input: >+25dBu
– Construction: 14-gauge steel chassis
– Power: 15VDC 100mA
– Conditions: For use in dry locations only between 5°C and 40°C
– Dimensions (L x W x D): 117mm x 150mm x 48mm / 4.6 x 5.9 x 1.9
– Weight: 1kg / 2.2lbs
– Product Code: R800-8102-00

The post Radial Backtrack Stereo Audio Switcher appeared first on Onthedex.

Small, powerful, and compact, the Radial Relay Xo Balanced Remote AB Switcher is designed for routing the output of a microphone to two separate locations. It features military-grade gold-contact sealed relays and full-size hand-inserted parts, ensuring quick and easy signal path switching while maintaining pristine audio quality. The device can be controlled remotely using one of the Radial JR1 footswitches (not included), and a remote link socket allows for the use of multiple Relay Xo units together.

This switcher is ideal for use with microphones and instruments, allowing for seamless switching between dry and wet channels or routing the output from a PA to an intercom for convenient communication. The Relay Xo is built with a durable 14-gauge steel enclosure and premium-grade components, featuring Radial’s signature book-end design for reliability and longevity in a wide range of applications.

Features of the Relay Xo include the ability to switch a vocal microphone from the PA to an intercom, allowing artists to communicate with musicians and technicians. The device can be controlled remotely using the JR1 footswitch, allowing for easy switching between signal paths. It enables the routing of any balanced signal to two destinations, and its built-in cable clamp prevents accidental power disconnection.

The device also features gold-sealed military-grade relays for audio signal switching and a straight wire signal path. It utilizes full-size hand-inserted parts to ensure smooth audio signal flow without distortion or artifacts. The durable switches are rated for over 20,000 cycles and come with metal outer casings. Isolated XLRs with heavy-duty glass-filled connectors are used, providing strength and durability.

The Relay Xo is built with a double-sided military-spec PCB for added durability and reduced radio frequency interference. Its book-end design creates a protective zone around the jacks and switches, and the 14-gauge steel enclosure prevents torqueing of the PCB and eliminates cold solder joints.

The specifications of the Relay Xo include a frequency response of 10Hz to 100kHz, a dynamic range of over 140dB, and a total harmonic distortion of less than 0.001 percent. It features XLR-F input and two XLR-M outputs, as well as combo and 1/4″ remote connectors. The switcher operates on 15VDC and has a power consumption of 30mA. It is suitable for use in dry locations between 5°C and 40°C.

The dimensions of the Relay Xo are as follows: length – 127mm, width – 84.1mm, and depth – 45.5mm. It weighs 0.64kg.

Overall, the Radial Relay Xo Balanced Remote AB Switcher is a versatile and reliable tool for routing microphone output and provides seamless control and switching capabilities for a variety of audio applications.

The post Radial Relay Xo Balanced Remote AB Switcher appeared first on Onthedex.

Make your life easier with the Radial SW8 8-Channel Auto-Switcher. This is an 8-channel redundant backup auto-switching interface. It is an indispensable tool for any performance where pre-recorded backing tracks are part of the artists sound providing you with a handy device that will automatically and seamlessly switch between two playback systems should one malfunction.

Switching can also be carried out manually from the front panel or remotely via a JR2 footswitch (not included). You’ll find switching instant. There’s no signal degradation or interference so the show will go on uninterrupted. The SW8 features a link function that enables you to slave several units together for larger track-count playback devices with no detrimental effect to the unit’s switching capabilities. The SW8 is easy to interface using line-level thru-puts and transformer-isolated XLR direct outputs for flexible use of both line-level and mic-level signals.

The features of the Radial SW8 8-Channel Auto-Switcher include:
– 8-channel auto-switcher that allows you to set up a redundant backup system
– Automatically switches between two multi-channel playback systems
– Designed primarily for live concerts and stage shows where backing tracks are used
– Adjustable gate detects machine malfunction and automatically switches to a backup machine for seamless performance
– Monitors and continuously audio signal such as SMPTE on the main playback system and switches to backup if signal drops
– Switching can be carried out manually on the front panel or using a Radial JR2 footswitch
– Multiple SW8s can be linked together for larger systems beyond 8 channels
– Global pad attenuates the signal going to the XLR direct box outputs by -20dB to prevent transformer saturation
– Gate input sensitivity can be adjusted on the front panel
– Mute switch turns off XLR outputs and leaves balanced D-Sub output on for local monitoring
– Standby switch holds auto-switching on inputs-A to prevent switching to inputs-B while waiting for a drone signal
– Alarm LED illuminates on the front panel when the tone signal falls below the set threshold level
– Ground lift switch disconnects pin-1 on the XLR output to reduce noise caused by ground loops
– Balanced low-Z transformer-isolated direct box outputs
– Two sets of eight balanced or unbalanced line-level inputs for the primary and backup systems (A and B)
– Balanced line-level D-Sub output sends active input set (A or B) to the PA or local monitoring system
– Balanced line-level A and B D-Sub inputs are used for connecting two multi-track playback units to the SW8
– Filter allows the use of a binary signal such as SMPTE as a drone track by smoothing out the signal
– Internal relay can turn on a siren or beacon when the drone signal drops below the set threshold
– Legendary Radial construction ensures incredible durability and reliable operation

Specifications:
– Audio Circuit Type: Passive signal path with active relay switching
– Transformer: Eclipse ET-DB2
– Number of Channels: 8
– Frequency Response: 20Hz – 20kHz
– Dynamic Range: >120dB
– Gain: -20dB
– Total Harmonic Distortion: 0.002 percent
– Intermodulation Distortion: >0.002 percent
– Phase Deviation: -2° at 20Hz
– Input Impedance: 140k Ohms balanced
– Output Impedance: 150 Ohms balanced
– Common Mode Rejection Ratio: -112dB at 50/60Hz
– Equivalent Input Noise: -95dBu
– Noise: -115dBu
– Maximum Input: 26dBu
– Input Connectors: 1/4″ TRS, D-Sub
– Output Connectors: XLR, D-Sub
– Construction: 14-gauge steel chassis and outer shell
– Power: Two +15VDC/400mA power supplies included
– Conditions: For use in dry locations only between 5°C and 40°
– Weight: 4.2kg / 9.2lbs
– Product Code: R800-8100-00

The post Radial SW8 8-Channel Auto-Switcher appeared first on Onthedex.

Signal transmission made easy. The Radial Catapult Mini RX 4-Channel transmitter allows you to send four channels of analog mic or line level audio through a standard shielded Cat 5 or Cat 6 Ethernet cable. This removes the need for messy cable runs and bulky multi-channel audio snakes. The Catapult ensures clean and safe signal transfer in a compact and lightweight package.

The four male XLR connectors are connected via straight wire to the RJ45 socket ensuring that your audio passes through without having to worry about colouration or distortion. No digital audio conversion is needed, your signal will maintain full integrity with no noise or interference. Thanks to Radials renowned build quality, the Catapult Mini RX is sure to provide you with years of reliable routing.

Features:
– Compact passive audio snake that enables you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable
– Equipped with female XLR connectors for connecting to either mic or line-level sound sources
– RJ45 output connector for hooking up standard Cat 5 or Cat 6 Ethernet cable running to your receiver
– Allows you to transmit mic or line-level signals from one location to another without signal loss, noise, or interference
– No digital audio conversion is needed, your high-quality analog signal is maintained throughout the signal chain
– Allows you to utilize standard shielded Cat 5 Ethernet cable which is widely available, lightweight, and economical
– Easy to connect two Catapult modules which then use analog conductors in the cable to deliver four balanced audio lines to any destination
– Enables you to make use of pre-existing cable installations that are pre-wired for Cat 5
– Perfect for transmitting audio between distant rooms without the need to install or supply new cabling
– Removes the need for bulky and expensive multi-channel audio cable, allowing contractors to benefit from pre-installed network cables for connecting rooms
– Passive design requires no power to operate and doesn’t require any signal conversion
– Straight-wire connections from the XLR connectors to the RJ45 connector ensures audio passes through without coloration or distortion

Specifications:
– Audio Circuit Type: Passive splitter
– Frequency Response: 7Hz – 20kHz
– Dynamic Range: 140dB
– Total Harmonic Distortion: 0.0005% at 1kHz
– Common Mode Rejection Ratio: >103dB
– Maximum Input: +35dBu
– Input Connector: Female XLR
– Output Connector: RJ45
– Pin Assignments: RJ45 Pin 1: XLR CH 4 Pin 2, RJ45 Pin 2: XLR CH 4 Pin 3, RJ45 Pin 3: XLR CH 3 Pin 2, RJ45 Pin 4: XLR CH 2 Pin 2, RJ45 Pin 5: XLR CH 2 Pin 3, RJ45 Pin 6: XLR CH 3 Pin 3, RJ45 Pin 7: XLR CH 1 Pin 2, RJ45 Pin 8: XLR CH 1 Pin 3
– Construction: 16-gauge steel chassis and outer shell
– Power: Passive, no power required
– Dimensions: 105mm x 40mm x 33mm / 4.125 x 1.56 x 1.31 (L x W x D)
– Weight: 0.4kg / 0.85lbs
– Warranty: Radial 3-year transferable

Connectivity:
– Controls and Indicators: Female XLR Inputs: For connecting to balanced mic or line-level sources, RJ45 Output: Sends analog audio over Cat 5 or Cat 6 Ethernet cable
– Product Code: R800-8028-00

The post Radial Catapult Mini TX 4-Channel Transmitter appeared first on Onthedex.

Signal transmission made easy.
The Radial Catapult Mini RX 4-Channel Receiver allows you to receive four channels of analog mic or line level audio through a standard shielded Cat 5 or Cat 6 Ethernet cable. This removes the need for messy cable runs and bulky multi-channel audio snakes. The Catapult ensures clean and safe signal transfer in a compact and lightweight package.

The four male XLR connectors are connected via straight wire to the RJ45 socket ensuring that your audio passes through without having to worry about colouration or distortion. No digital audio conversion is needed your signal will maintain full integrity with no noise or interference. Thanks to Radials renowned build quality the Catapult Mini RX is sure to provide you with years of reliable routing.

Features:
– Compact passive audio snake that enables you to receive four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable
– Equipped with male XLR connectors for connecting to your mixer interface or recorder
– RJ45 input connector for hooking up standard Cat 5 or Cat 6 Ethernet cable running from your transmitter
– Allows you to receive mic or line level signals from distant locations without signal loss noise or interference
– No digital audio conversion is needed your high-quality analogue signal is maintained throughout the signal chain
– Allows you to utilise standard shielded Cat 5 Ethernet cable which is widely available lightweight and economical
– Easy to connect two Catapult modules which then use analog conductors in the cable to deliver four balanced audio lines to any destination
– Enables you to make use of pre-existing cable installations that are pre-wired for Cat 5
– Perfect for transmitting audio between distant rooms without the need to install or supply new cabling
– Removes the need for bulky and expensive multi-channel audio cable allowing contractors to benefit from pre-installed network cables for connecting rooms
– Passive design required no power to operate and doesnt require any signal conversion
– Straight-wire connections from the XLR connectors to the RJ45 connector ensures audio passes through without colouration or distortion

Specifications:
– Audio Circuit Type: Passive splitter
– Frequency Response: 7Hz – 20kHz
– Dynamic Range: 140dB
– Total Harmonic Distortion: 0.0005-percent at 1kHz
– Common Mode Rejection Ratio: >103dB
– Maximum Input: +35dBu
– Input Connector: Male XLR
– Output Connector: RJ45
– Pin Assignments: RJ45 Pin 1: XLR CH 4 Pin 2 RJ45 Pin 2: XLR CH 4 Pin 3 RJ45 Pin 3: XLR CH 3 Pin 2 RJ45 Pin 4: XLR CH 2 Pin 2 RJ45 Pin 5: XLR CH 2 Pin 3 RJ45 Pin 6: XLR CH 3 Pin 3 RJ45 Pin 7: XLR CH 1 Pin 2 RJ45 Pin 8: XLR CH 1 Pin 3
– Construction: 16-gauge steel chassis and outer shell
– Power: Passive no power required
– Dimensions: 105mm x 40mm x 33mm / 4.125 x 1.56 x 1.31 (L x W x D)
– Weight: 0.4kg / 0.85lbs
– Warranty: Radial 3-year transferable

Connectivity:
– Controls and Indicators
– Male XLR Outputs: For connecting to the inputs of a mixer or recording interface
– RJ45 Input: Receives analog audio over Cat 5 or Cat 6 Ethernet cable

Product Code: R800-8029-00

The post Radial Catapult Mini RX 4-Channel Receiver appeared first on Onthedex.

Make your live shows easier today. The Radial Catapult RX4M 4-Channel Audio Snake is a high-performance audio snake input module featuring an Ethercon input throughput and two sets of XLR outputs. It is ultimate choice for connecting a whole range of equipment. This includes microphones and other popular XLR-based equipment. The box itself features a Cat-5 shielded twisted pair cable. The RX4L is a receive module with 4 mic-level (-40 0dB) isolated XLR-M outputs and 1 set of pass-through XLR-Ms.

More info…

Features:
– 4 mic-level (-40 0dB) isolated XLR-M outputs and 1 set of pass-through XLR-Ms
– Connect a range of external devices over larger areas
– Heavy steel construction and heavy-duty powder coat finish for maximum durability
– Cat-5 shielded twisted pair cable
– Ground lift switch helps to eliminate hum and buzz caused by ground loops

Specifications:
– RJ45 connection: female
– Number of RJ45 connections: 1
– Signal Connection: 3-pin XLR female
– Number of Signal Connectors: 4
– Product Code: R800-8026-00

The post Radial Catapult RX4M 4-Channel Audio Snake appeared first on Onthedex.

Make your live shows easier today. The Radial Catapult RX4M 4-Channel Audio Snake is a high-performance audio snake input module featuring an Ethercon input throughput and two sets of XLR outputs. It is the ultimate choice for connecting a whole range of equipment, including microphones and other popular XLR-based equipment.

The box itself features a Cat-5 shielded twisted pair cable. The RX4L is a receive module with 4 line-level (-20 +15dB) isolated XLR-M outputs and 1 set of pass-through XLR-Ms.

More info…

Features:
– 4 line-level (-20 +15dB) isolated XLR-M outputs and 1 set of pass-through XLR-Ms
– Connect a range of external devices over larger areas
– Heavy steel construction and heavy-duty powder coat finish for maximum durability
– Cat-5 shielded twisted pair cable
– Ground lift switch helps to eliminate hum and buzz caused by ground loops

Specifications:
– RJ45 connection: female
– Number of RJ45 connections: 1
– Signal Connection: 3-pin XLR female
– Number of Signal Connectors: 4
– Product Code: R800-8027-00

The post Radial Catapult RX4L 4-Channel Audio Snake appeared first on Onthedex.

Simple yet powerful, the Radial Catapult TX4L 4-Channel Audio Snake is a high-performance audio snake with four XLR inputs, two Neutrik Ethercon outputs, and four XLR outputs. It is the ideal choice for connecting microphones and other XLR-based equipment, making complex set-ups easier.

Featuring a simple yet durable design, the Catapult provides optimal connectivity and the best quality signal possible. Housed in a heavy steel base with a protective bar around the connectors, it can endure the knocks and bumps of live performances. The heavy-duty powder coat finish protects it from scratching and provides a handle for easy carrying.

In addition to acting as a standard audio snake, the Catapult has versatile functionality. It can provide extra inputs and outputs, as well as transport channels across large areas. With 4 channels, it allows you to send both analog and AES digital audio signals through a Cat-5 shielded twisted pair cable, making it perfect for transporting balanced audio across a large stage. The ground lift switch helps eliminate hum and buzz caused by ground loops.

The Catapult features four XLR inputs, two Neutrik Ethercon outputs, and four XLR outputs. It is designed for heavy-duty use with its construction and powder coat finish. The Cat-5 shielded twisted pair cable provides a reliable connection for transferring audio signals. The ground lift function helps eliminate unwanted noise. This audio snake is an excellent choice for professional audio applications.

With its versatile functionality and durable design, the Radial Catapult TX4L 4-Channel Audio Snake is an essential tool for any live performance or audio setup.

The post Radial Catapult TX4L 4-Channel Audio Snake appeared first on Onthedex.