Get creative with your pedals. The Radial Workhorse EXTC-500 is a guitar interface and reamp that can be used with 500 series racks. This module opens up new possibilities for creativity, allowing you to easily reamp any track through your pedalboard. You can now create pedal combinations and setups that were previously impossible, resulting in interesting and unique sonic possibilities. Adjust the wet-dry signal mix using the blend control and optimize the signal-to-noise ratio with the send and return level controls. Incorporate your favorite pedals into your existing setup and explore endless creative options with the Radial Workhorse EXTC-500.
For more information, click here: [link]
Features of the Radial Workhorse EXTC-500 include front panel inputs for connecting guitar pedals, a dedicated blend control for adjusting the wet-dry signal mix, the ability to adjust the polarity of the wet signal path, and a second unbalanced effects insert via Omniport when used with the Workhorse rack. Independent send and return level controls allow you to optimize the signal-to-noise ratio. The transformer isolated design eliminates hum and buzz caused by ground loops, and the gold-plated 15-pin card edge ensures a positive connection. The circuit board is military-spec with a double-sided design and full ground plane for minimal noise. The 100 percent discrete electronics ensure optimal signal transfer. The double-layer steel front panel is robust and durable. The Radial Workhorse EXTC-500 is designed to work with the Radial Workhorse 500 Series rack as well as other 500 Series racks.
Specifications for the Radial Workhorse EXTC-500 include a solid-state audio circuit with transformer coupled effects loop, a dynamic range of 20Hz to 20kHz for the dry signal and 20Hz to 10kHz for the wet signal, a gain of 12dB, and total harmonic distortion of less than 0.005 percent for the dry signal and less than 0.002 percent for the wet signal. The intermodulation distortion is less than 1 percent at +4dB, and the noise level is -93dB for the dry signal and -84dB for the wet signal. The maximum input level is +26dBu for the dry signal and +20dBu for the wet signal. The module requires 60mA of power at ±16V DC. Polarity can be reversed by 180°.
CHECK PRICES AT ZZOUNDS