The PreSonus Temblor T8 Subwoofer offers high-quality components and design for controlling the low-frequency foundation of your mix. It has plenty of inputs and outputs as well as extensive user controls that allow for seamless integration into your setup. The T8 provides two sets of inputs, balanced 1/4 TRS and unbalanced RCA, making it compatible with PreSonus BT-series active speakers and home stereo speakers.

The Temblor T8 Active Subwoofer is a great companion to the Eris and Sceptre active reference monitors and Ceres BT-series active speakers. It complements full-range monitors without overshadowing them, extending the reach of your full-range system’s low end in a musical and natural way. It is suitable for various environments, including personal studios, gaming setups, audiophile systems, and home theaters. The T8 features an 8-inch glass-composite driver, a rear-firing bass-reflex acoustic port, and a 200W Class AB amplifier.

The extensive user controls of the Temblor T8 include input gain and a continuously variable lowpass filter. These controls allow you to create a seamless crossover transition between your full-range studio monitors and subwoofer, optimizing your listening environment. The subwoofer also has a switchable highpass filter that removes frequency content below 80Hz from the signal sent to the main monitors, preventing destructive cancellation and reinforcement in the subwoofer’s upper range. This makes the T8 compatible with a wide range of studio monitors.

Key features of the T8 include the 8-inch glass-composite low-frequency transducer, rear-firing bass-reflex acoustic port, input gain control, continuously variable lowpass filter, built-in crossover, and switchable highpass filter. The amplifier power is 200W peak (100W RMS), and the frequency response is 30Hz to 200Hz. Other specifications include signal-to-noise ratio, THD, power consumption, amplifier type, peak SPL at 1m, woofer size, cabinet construction, and various user controls.

The inputs and outputs of the T8 include balanced 1/4 TRS and unbalanced RCA options. The subwoofer also has protection features such as RF interference protection, output-current limiting, over-temperature protection, and turn-on/off transient protection. It also includes a subsonic filter and an external mains fuse.

Overall, the PreSonus Temblor T8 Subwoofer offers high-quality performance and versatile features for enhancing the low-frequency response in your audio setup.

The post PreSonus Temblor T8 Active Subwoofer – Nearly New appeared first on Onthedex.

The PreSonus Temblor T8 Subwoofer offers superior control over the low-frequency aspect of your mix. It features high-quality components, a well-designed structure, and various inputs and outputs. This allows for seamless integration into your setup. The T8 provides two sets of inputs – left and right balanced 1/4 TRS and unbalanced RCA main inputs. This makes it compatible with PreSonus BT-series active speakers and home stereo speakers.

Moreover, the Temblor T8 Active Subwoofer is the perfect companion to the Eris and Sceptre active reference monitors, as well as the Ceres BT-series active speakers. It complements full-range monitors without overpowering them, extending the low-end reach of your full-range systems in a musical and natural way. It is suitable for various environments, including personal studios, gaming setups, audiophiles, and home theaters. The T8 features an 8-inch downward-firing glass-composite driver, a round rear-firing bass-reflex acoustic port, and a 200W Class AB amplifier (100W RMS).

The Temblor T8 also offers extensive user controls for optimal customization. The input gain can be adjusted from -30 dB to +6 dB continuously. Additionally, there is a continuously variable lowpass filter (50 Hz to 130 Hz) that allows for a seamless crossover transition between your studio monitors and subwoofer. This creates a more accurate listening environment. The subwoofer also includes a switchable highpass filter that removes frequencies below 80 Hz from the full-range signal, preventing destructive cancellation and reinforcement in the subwoofer’s upper range. This allows the T8 to complement not only the Sceptre CoActual, Eris, and Ceres BT active studio monitors but virtually any studio monitor.

The features of the Temblor T8 include an 8-inch downward-firing glass-composite low-frequency transducer, a rear-firing bass-reflex acoustic port, input gain control, a continuously variable lowpass filter, built-in crossover, and a switchable highpass filter. The subwoofer also comes with Studio One Prime DAW software and Studio Magic plug-in suite.

In terms of specifications, the T8 has a 200W peak amplifier power (100W RMS), a frequency response of 30 Hz to 200 Hz, and a signal-to-noise ratio of over 98dB (A weighted). The THD is 0.05, and the power consumption is 120W. The amplifier type is Class AB, and the peak SPL at 1m is 104dB. The subwoofer features an 8-inch glass-composite downward-firing woofer and a rear-firing round bass reflex acoustic port. The cabinet is constructed with vinyl-laminated MDF.

The user controls of the T8 include input gain range (-30dB to +6dB), polarity switch (0° or 180°), lowpass filter control (50 Hz to 130 Hz), and a highpass filter switch (On/Off). The inputs and outputs include 2 x balanced 1/4 TRS inputs, 2 x unbalanced RCA inputs, and 2 x balanced 1/4 TRS outputs and 2 x unbalanced RCA outputs with the option for full range with an 80 Hz highpass filter.

Lastly, the Temblor T8 provides protection against RF interference, output-current limiting, over-temperature issues, turn-on/off transients, and subsonic filter. It also includes an external mains fuse for added safety.

The post PreSonus Temblor T8 Active Subwoofer appeared first on Onthedex.

Immerse yourself in sound. The Samson MediaOne 10S Active Subwoofer brings a new dimension to all your multimedia needs. Whether youre producing a studio recording listening to your favourite music or kicking back with a video game youll get thick nuanced bass response with plenty of oomph. Deep and articulate. The MediaOne 10S lets you feel the bass from a custom 10″ woofer. No matter where your sub is positioned youll get flawless audio thanks to the down-firing reflex port. Designed for superior dispersion the 10S boasts a wide flat response across the entire frequency spectrum. Its enough to knock you off your feet. Connect to everything. Equipped with Line in Line out and speaker level inputs/outputs the MediaOne 10S can be integrated into any setup. Whether youre upgrading your home studio or want more from your hi-fi this small and mighty sub will bring a wealth of tone and texture.

More info…

Optimised in every design aspect Great music deserves a great speaker. That’s why the MediaOne 10S has been designed from the ground up to produce clear bass responses. Featuring a powerful 10 woofer and tuned bass reflex port the 10S enhances any monitoring setup with accurate low frequency reproduction. Thanks to the all-wood cabinet and mesh grille your subwoofer looks as good as it sounds. The back panel of the 10S features RCA inputs for direct connection of music sources as well as RCA outputs to hook up your main monitors. In addition there are speaker input and output terminals for connecting A/V receivers and/or additional speakers. This is everything you need to improve your multimedia system. Features Perfect for listening to music producing tracking watching videos or gaming with 100W of output power on board. Exceptional low frequency reproduction from a 10” copolymer woofer with butyl surround Bass that you can feel thanks to a down-firing tuned reflex port Easy to connect via RCA inputs and outputs and speaker level inputs and outputs for stereo system connections Correct phase alignment with ease thanks to an integrated phase switch Precise control of your levels with subwoofer volume control Efficient power saving via selectable auto sleep mode Keeps your driver safe from damages with a protective mesh grille Specifications Woofer: 10” Long Excursion Transducer Enclosure type: Bass Reflex System Enclosure: Vinyl wrapped MDF cabinet with mesh grille Frequency response: 35Hz – 300Hz ±3dB Crossover frequency: 100Hz 12db/oct Linkwitz Riley Low pass filter: 80-160Hz Output power: 100 Watts RMS Line input connectors: Unbalanced RCA Speaker input connectors: Push Terminal Line output connectors: Unbalanced RCA Speaker output connectors: Push Terminal Controls: VOLUME LOW PASS AUTO ON POWER PHASE Power consumption: 100W Fuse: AC 100V-120V T1.6A/250V AC 220V-240V T800mA/250V Dimensions: 14.17″ x 12.75″ x 16.1″ 360mm x 324mm x 409mm Weight: 27.33 lb 12.4 kg

The post Samson MediaOne 10S Active Subwoofer appeared first on Onthedex.

The KRK S8.4 is a powerful and accurate subwoofer that perfectly compliments your studio monitors for an enhanced listening experience. The S8.4 builds on the legacy of KRKs sonic performance delivering tight accurate and extended bass response. The S8.4 is the ideal companion to accurately monitor your low end when mixing and mastering a host of different musical genres. A highly efficient class-D power amp dramatically increases transient response control and punch while working in unison with a 8-inch woofer and 1.5-inch voice coil to give the engineer artist and producer an extended frequency range from 29Hz – 205Hz with a maximum SPL rating of a tremendous 113dB. The KRK S8.4 pushes the envelope further by improving previous models by focusing on low-frequency extension down to 29Hz improving porting for a hugely improved low-frequency phase response and eliminating port noise and vibration redesigned baffles for a lower height profile and less depth allowing for easier placement and flexibility and more. Universally compatible with almost any audio source the KRK S8.4 has a wealth of connectivity options. No more will you need any adapters or specialised cabling the onboard RCA TRS and XLR inputs and outputs allow you to quickly and easily integrate the S8.4 into your existing monitoring setup.

More info…

Generous frequency range The integrated power amplifier delivers 109w RMS performance yielding a sound pressure level of 113dB peak. Bass frequencies are less audible than mid-range frequencies which makes it more difficult to monitor properly the S8.4 packs enough power to ensure that you can comfortably monitor the bass and sub frequencies without damaging your equipment or ears. A generous frequency range of 29 to 205Hz will give you enough depth to accurately mix a myriad of musical genres that use frequencies that reach this low. Variable crossover The S8.4 features a 4-position crossover to adjust the subwoofers roll-off to perfectly match it with your studio monitors or hi-fi speakers. By fine-tuning your cross-over you will ensure that your sound is cohesive and seamless between the full frequency range. The inclusion of a 4-position crossover is perfect for matching between any size of nearfield monitor for smaller monitors with a more drastic bass roll-off you can use the higher settings to ensure that the low end is represented accurately. For larger monitors you can use the lower settings to meld the low end between your monitors and subwoofer. Ultra-accurate bass extension The KRK S8.4 allows you to hear and feel low end accurately in any studio environment. Your low-end frequencies are vital when mixing and mastering your songs they are the driving energy and force that give your music movement and life. Making sure that this is well rounded and balanced to translate on any playback system such as a car stereo club or bar venue PA system etc is essential. Too much low end and you will muddy your sound taking away any focal points from other instruments that occupy higher frequency ranges such as keyboard melodies or vocal performances. Not enough bass and you will find yourself with an anaemic sound that wont translate well to large venue speakers. Take the guesswork out of your mixing and mastering by using the S8.4 to ensure that you get the balance right and get your songs heard everywhere you go. Designed for performance An 8-inch glass aramid composite woofer and 1.5-inch voice coil sit inside an 15mm reinforced MDF baffle with a front-mounted vent. When in combination the S8.4 provides you with a robust subwoofer that combines durability with performance. The front vented mount allows for flexible placement of the S8.4 by ensuring that you will not receive any direct reflections behind the subwoofer onto your wall which can result in unwanted standing waves. The front vent also gives you confidence in knowing that even if placed off-centre from your listening position the S8.4 will retain the character of the sound and performance as the low frequencies will still be projected forward to you. The mounted 8-inch glass woofer and 1.5-inch voice coil are purpose-designed to eliminate any diffraction distortion ensuring that you dont hear any unwanted signal degradation. Versatile connectivity and controls The S8.4 possesses all of the input connectivity that you will ever need to integrate this into your existing studio system. Featuring XLR RCA and TRS inputs you can connect into most home-audio hi-fi turntables and DJ turntables as well as most audio interfaces and professional mixers. The S8.4 gives you control over multiple parameters to ensure that you are getting the best performance and sound reproduction possible in your studio. The main volume dial is provided to get the balance perfect between your subwoofer and main monitors and a 4-position selectable crossover allows you to finely tune the balance between your subwoofer and your monitors low-end roll-off ensuring you get the maximum clarity between the frequencies taking the guesswork out of your mixing and mastering. Further controls such as a ground-lift eliminates any interference caused by ground loops that can distort and degrade your signal a stand-by off/on switch will send the S8.4 into power-saving mode when not in use over long sessions and a High-pass filter and sub bypass is accessed through the footswitch for quick and easy A/Bing if your sound. FeaturesClass-D power amp for increased transient response 8 glass aramid composite woofer Bass extension to 27Hz with a maximum SPL of 117dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Front-firing bass port for placement flexibility Optimised four-position crossover control Universal connectivity: XLR 1/4 TRS and RCA inputs and outputs Polarity and input sensitivity controls 15mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loopsSpecificationConfiguration: Front loaded vented subwoofer System type: Active subwoofer Transducers:8 inch glass aramid fibre composite woofer 1.5 inch voice coilFrequency response: 34.5Hz – 133Hz +/- 3dB Frequency range: 29Hz – 205Hz -10dB Max SPL: 113dB Power rating: 109w (1 THD+N) Input impedance: 9.4k Ohms balanced / 9.2 Ohms unbalanced Input connections:XLR left/right 1/4″ TRS left/right RCA left/right 1/4″ footswitchOutput connections:XLR left/right 1/4″ TRS left/right RCA left/rightControls: Volume 4-position crossover LPF/HPF control input sensitivity (standard and high) polarity (0 or 180 degrees) standby (on/off) ground lift sub and HPF bypass (with operational footswitch only). Construction: 15mm reinforced MDF Finish: Black vinyl wrap black paint for baffle Hardware: EVA isolation pad Dimensions (H x W x D): 279 x 410mm x 292mm Weight: 12kg

The post KRK S8.4 Active Subwoofer appeared first on Onthedex.

The KRK S10.4 is a powerful and accurate subwoofer that perfectly compliments your studio monitors for an enhanced listening experience. The S10.4 builds on the legacy of KRKs sonic performance delivering tight accurate and extended bass response. The S10.4 is the ideal companion to accurately monitor your low end when mixing and mastering a host of different musical genres. A highly efficient class-D power amp dramatically increases transient response control and punch while working in unison with a 10-inch woofer and 2-inch voice coil to give the engineer artist and producer an extended frequency range from 27Hz – 156Hz with a maximum SPL rating of a tremendous 117dB. The KRK S10.4 pushes the envelope further by improving previous models by focusing on low-frequency extension down to 27Hz improving porting for a hugely improved low-frequency phase response and eliminating port noise and vibration redesigned baffles for a lower height profile and less depth allowing for easier placement and flexibility and more. Universally compatible with almost any audio source the KRK S10.4 has a wealth of connectivity options. No more will you need any adapters or specialised cabling the onboard RCA TRS and XLR inputs and outputs allow you to quickly and easily integrate the S10.4 into your existing monitoring setup.

More info…

Generous frequency range The integrated power amplifier delivers 160w RMS performance yielding a sound pressure level of 117dB peak. Bass frequencies are less audible than mid-range frequencies which makes it more difficult to monitor properly the S10.4 packs enough power to ensure that you can comfortably monitor the bass and sub frequencies without damaging your equipment or ears. A generous frequency range of 27 to 156Hz will give you enough depth to accurately mix a myriad of musical genres that use frequencies that reach this low. Variable crossover The S10.4 features a 4-position crossover to adjust the subwoofers roll-off to perfectly match it with your studio monitors or hi-fi speakers. By fine-tuning your cross-over you will ensure that your sound is cohesive and seamless between the full frequency range. The inclusion of a 4-position crossover is perfect for matching between any size of nearfield monitor for smaller monitors with a more drastic bass roll-off you can use the higher settings to ensure that the low end is represented accurately. For larger monitors you can use the lower settings to meld the low end between your monitors and subwoofer. Ultra-accurate bass extension The KRK S10.4 allows you to hear and feel low end accurately in any studio environment. Your low-end frequencies are vital when mixing and mastering your songs they are the driving energy and force that give your music movement and life. Making sure that this is well rounded and balanced to translate on any playback system such as a car stereo club or bar venue PA system etc is essential. Too much low end and you will muddy your sound taking away any focal points from other instruments that occupy higher frequency ranges such as keyboard melodies or vocal performances. Not enough bass and you will find yourself with an anaemic sound that wont translate well to large venue speakers. Take the guesswork out of your mixing and mastering by using the S10.4 to ensure that you get the balance right and get your songs heard everywhere you go. Designed for performance A 10-inch glass aramid composite woofer and 2-inch voice coil sit inside an 15mm reinforced MDF baffle with a front-mounted vent. When in combination the S10.4 provides you with a robust subwoofer that combines durability with performance. The front vented mount allows for flexible placement of the S10.4 by ensuring that you will not receive any direct reflections behind the subwoofer onto your wall which can result in unwanted standing waves. The front vent also gives you confidence in knowing that even if placed off-centre from your listening position the S10.4 will retain the character of the sound and performance as the low frequencies will still be projected forward to you. The mounted 10-inch glass woofer and 2-inch voice coil are purpose-designed to eliminate any diffraction distortion ensuring that you dont hear any unwanted signal degradation. Versatile connectivity and controls The S10.4 possesses all of the input connectivity that you will ever need to integrate this into your existing studio system. Featuring XLR RCA and TRS inputs you can connect into most home-audio hi-fi turntables and DJ turntables as well as most audio interfaces and professional mixers. The S10.4 gives you control over multiple parameters to ensure that you are getting the best performance and sound reproduction possible in your studio. The main volume dial is provided to get the balance perfect between your subwoofer and main monitors and a 4-position selectable crossover allows you to finely tune the balance between your subwoofer and your monitors low-end roll-off ensuring you get the maximum clarity between the frequencies taking the guesswork out of your mixing and mastering. Further controls such as a ground-lift eliminates any interference caused by ground loops that can distort and degrade your signal a stand-by off/on switch will send the S10.4 into power-saving mode when not in use over long sessions and a High-pass filter and sub bypass is accessed through the footswitch for quick and easy A/Bing if your sound. FeaturesClass-D power amp for increased transient response 10 glass aramid composite woofer Bass extension to 27Hz with a maximum SPL of 117dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Front-firing bass port for placement flexibility Optimised four-position crossover control Universal connectivity: XLR 1/4 TRS and RCA inputs and outputs Polarity and input sensitivity controls 15mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loopsSpecificationConfiguration: Front loaded vented subwoofer System type: Active subwoofer Transducers:10 inch glass aramid fibre composite woofer 2 inch voice coilFrequency response: 30z – 110Hz +/- 3dB Frequency range: 27Hz – 156Hz -10dB Max SPL: 117dB Power rating: 160w (1 THD+N) Input impedance: 9.4k Ohms balanced / 9.2 Ohms unbalanced Input connections:XLR left/right 1/4″ TRS left/right RCA left/right 1/4″ footswitchOutput connections:XLR left/right 1/4″ TRS left/right RCA left/rightControls: Volume 4-position crossover LPF/HPF control input sensitivity (standard and high) polarity (0 or 180 degrees) standby (on/off) ground lift sub and HPF bypass (with operational footswitch only). Construction: 15mm reinforced MDF Finish: Black vinyl wrap black paint for baffle Hardware: EVA isolation pad Dimensions (H x W x D): 341 x 479mm x 310mm Weight: 15.88kg

The post KRK S10.4 Active Subwoofer appeared first on Onthedex.

The KRK S12.4 is a powerful and accurate subwoofer that perfectly compliments your studio monitors for an enhanced listening experience. The S12.4 builds on the legacy of KRKs sonic performance delivering tight accurate and extended bass response. The S12.4 is the ideal companion to accurately monitor your low end when mixing and mastering a host of different musical genres. A highly efficient class-D power amp dramatically increases transient response control and punch while working in unison with a 12-inch woofer and 2.5-inch voice coil to give the engineer artist and producer an extended frequency range from 23Hz – 130Hz with a maximum SPL rating of a tremendous 120dB. The KRK S12.4 pushes the envelope further by improving previous models by focusing on low-frequency extension down to 23Hz improving porting for a hugely improved low-frequency phase response and eliminating port noise and vibration redesigned baffles for a lower height profile and less depth allowing for easier placement and flexibility and more. Universally compatible with almost any audio source the KRK S12.4 has a wealth of connectivity options. No more will you need any adapters or specialised cabling the onboard RCA TRS and XLR inputs and outputs allow you to quickly and easily integrate the S12.4 into your existing monitoring setup.

More info…

Generous frequency range The integrated power amplifier delivers 220w RMS performance yielding a sound pressure level of 120dB peak. Bass frequencies are less audible than mid-range frequencies which makes it more difficult to monitor properly the S12.4 packs enough power to ensure that you can comfortably monitor the bass and sub frequencies without damaging your equipment or ears. A generous frequency range of 23 to 130Hz will give you enough depth to accurately mix a myriad of musical genres that use frequencies that reach this low. Variable crossover The S12.4 features a 4-position crossover to adjust the subwoofers roll-off to perfectly match it with your studio monitors or hi-fi speakers. By fine-tuning your cross-over you will ensure that your sound is cohesive and seamless between the full frequency range. The inclusion of a 4-position crossover is perfect for matching between any size of nearfield monitor for smaller monitors with a more drastic bass roll-off you can use the higher settings to ensure that the low end is represented accurately. For larger monitors you can use the lower settings to meld the low end between your monitors and subwoofer. Ultra-accurate bass extension The KRK S12.4 allows you to hear and feel low end accurately in any studio environment. Your low-end frequencies are vital when mixing and mastering your songs they are the driving energy and force that give your music movement and life. Making sure that this is well rounded and balanced to translate on any playback system such as a car stereo club or bar venue PA system etc is essential. Too much low end and you will muddy your sound taking away any focal points from other instruments that occupy higher frequency ranges such as keyboard melodies or vocal performances. Not enough bass and you will find yourself with an anaemic sound that wont translate well to large venue speakers. Take the guesswork out of your mixing and mastering by using the S12.4 to ensure that you get the balance right and get your songs heard everywhere you go. Designed for performance A 12-inch kevlar aramid fibre composite woofer and 2.5-inch voice coil sit inside an 18mm reinforced MDF baffle with a front-mounted vent. When in combination the S12.4 provides you with a robust subwoofer that combines durability with performance. The front vented mount allows for flexible placement of the S12.4 by ensuring that you will not receive any direct reflections behind the subwoofer onto your wall which can result in unwanted standing waves. The front vent also gives you confidence in knowing that even if placed off-centre from your listening position the S12.4 will retain the character of the sound and performance as the low frequencies will still be projected forward to you. The mounted 12-inch kevlar woofer and 2.5-inch voice coil are purpose-designed to eliminate any diffraction distortion ensuring that you dont hear any unwanted signal degradation. Versatile connectivity and controls The S12.4 possesses all of the input connectivity that you will ever need to integrate this into your existing studio system. Featuring XLR RCA and TRS inputs you can connect into most home-audio hi-fi turntables and DJ turntables as well as most audio interfaces and professional mixers. The S12.4 gives you control over multiple parameters to ensure that you are getting the best performance and sound reproduction possible in your studio. The main volume dial is provided to get the balance perfect between your subwoofer and main monitors and a 4-position selectable crossover allows you to finely tune the balance between your subwoofer and your monitors low-end roll-off ensuring you get the maximum clarity between the frequencies taking the guesswork out of your mixing and mastering. Further controls such as a ground-lift eliminates any interference caused by ground loops that can distort and degrade your signal a stand-by off/on switch will send the S12.4 into power-saving mode when not in use over long sessions and a High-pass filter and sub bypass is accessed through the footswitch for quick and easy A/Bing if your sound. FeaturesClass-D power amp for increased transient response 12 woven Kevlar woofer Bass extension to 26Hz with a maximum SPL of 120dB Footswitch control enables/disables sub and crossover filter (footswitch not included) Front-firing bass port for placement flexibility Optimised four-position crossover control Universal connectivity: XLR 1/4 TRS and RCA inputs and outputs Polarity and input sensitivity controls 18mm reinforced MDF enclosure provide maximum strength and protection Ground lift switch prevents ground loopsSpecificationConfiguration: Front loaded vented subwoofer System type: Active subwoofer Transducers:12 inch kevlar aramid fibre composite woofer 2.5 inch voice coilFrequency response: 26Hz – 97Hz +/- 3dB Frequency range: 23Hz – 130Hz -10dB Max SPL: 120dB Power rating: 220w (1 THD+N) Input impedance: 9.4k Ohms balanced / 9.2 Ohms unbalanced Input connections:XLR left/right 1/4″ TRS left/right RCA left/right 1/4″ footswitchOutput connections:XLR left/right 1/4″ TRS left/right RCA left/rightControls: Volume 4-position crossover LPF/HPF control input sensitivity (standard and high) polarity (0 or 180 degrees) standby (on/off) ground lift sub and HPF bypass (with operational footswitch only). Construction: 18mm reinforced MDF Finish: Black vinyl wrap black paint for baffle Hardware: EVA isolation pad Dimensions (H x W x D): 416mm x 606mm x 365mm Weight: 28.3kg

The post KRK S12.4 Active Subwoofer appeared first on Onthedex.

The Neumann MA 1 Monitor Alignment Kit with KH 750 DSP Subwoofer adds depth and detail to your existing monitor setup. With an individually calibrated measurement microphone tuned subwoofer and user-friendly software its like having an expert engineer right in the room. Mix master and monitor with precision. The Neumann KH 750 DSP Active Subwoofer is engineered to deliver exceptional acoustic performance. Its compact and powerful with a 10″ long throw woofer on board. Complete with the Neumann.Control app you can get the best sound from the palm of your hand. The best possible sound for home studios and professional control rooms. The MA 1 Monitor Alignment software automatically calibrates your stereo monitors. Advanced calibration algorithms make it easy to get world class results no matter where you mix master and monitor.

More info…

Neumann MA 1 Monitor Alignment Studio sound made easy No special drivers. No additional plug-ins. All alignment data is stored directly into your DSP-powered monitors. Adjust phase and amplitude with the software. You dont need special acoustic knowledge to get great results. This kit does the hard work for you. Neumann KH 750 DSP Active Studio Subwoofer Everything you need right at your fingertips Thanks to the Neumann.Control app speaker set-up has never been easier. Through IP networking you can easily identify speakers in the same room easily assigning them to individual positions connected and controlled directly from your tablet or smartphone. With Neumann’s Guided Alignment you can achieve optimised speaker arrangements tailor-made to your surroundings. For expert users Neumann.Control offers Manual Alignment. With an 8-band parametric EQ speaker levels and delays can be adjusted to ensure you always get the sound you need. Take complete control of your arrangement with adjustable operation parameters. From volume preset levels mutes groups solos and more. Your sound your way all from the palm of your hand. What’s in the box 1 x MA 1 Microphone 1 x Neumann KH 750 DSP Active Studio Subwoofer 1 x Microphone clamp 1 x Quick guide 1 x Safety guide Software is downloadable Features Neumann MA 1 Monitor Alignment Exceptional acoustic results for stereo home and professional studio setups Highest accuracy for tonality and impulse reproduction Purpose built for stereo pairs of Neumann studio monitors Correct your room with ease thanks to advanced calibration algorithms Developed by the world’s leading institute for audio signal processing (IIS) for the best monitor quality possible Easy to use software compatible with both Mac and PC No plug-in or special audio drivers required – everything is stored in the DSP-powered monitors for ease of use Optimised amplitude response and phase thanks to dedicated software Comes fully equipped with an individually calibrated measurement microphone Neumann KH 750 DSP Active Studio Subwoofer Perfect for extending your KH 810 KH 870 and KH 805 subwoofer systems Combats standing waves with an ultra-stiff wooden cabinet design Huge bass from a compact enclosure Deep articulate bottom end from long-throw bass driver Low harmonic distortion for ultra-precise sound reproduction Flexible operation via 2.0/0.1 bass management Tailor your subwoofer to the correct application with four routing modes (stereo 80 Hz bass management external bass management LFE up to 120 Hz LFE full range) Pristine signal integrity from electronically balanced analogue XLR inputs and outputs Wide range input gain and output level controls Total control of your sound with 8-position phase control continuous low-cut control and parametric equaliser Versatile switch mode power supply for universal use Eliminate ground loop noise with the dedicated lift switch Low heat dissipation amplifiers with large headroom and sophisticated protection circuitry Separate thermo limiter to protect the voice coil and power amplifier Connect to your existing network infrastructure with the network connector using standard IP protocol User friendly back panel gives full easy access to speaker controls and connections Standby function reduces power consumption when not in use Specifications Neumann MA 1 Monitor Alignment Acoustical operating principle: Pressure transducer Directional pattern: Omnidirectional Frequency range: 20Hz – 20kHz Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software) Rated impedance: 50 ohms Rated load impedance: 1000 ohms Equivalent noise level CCIR: 39dB Equivalent noise level A-weighted: 27 Db-A Maximum SPL for THD 0.5 : 132dB Signal-to-noise ratio CCIR (re. 94 dB SPL): 55dB Signal-to-noise ratio A-weighted (re. 94 dB SPL): 67 dB Maximum output voltage: 10dBu Supply voltage (P48 IEC 61938): 48V +/- 4V Current consumption (P48 IEC 61938): 3 mA Matching connector: XLR3F Weight: 37g Diameter: 23mm Length: 117mm Neumann KH 750 DSP Active Studio Subwoofer Free Field Frequency Response ±6 dB: 16 – 800 Hz Free Field Frequency Response ±3 dB: 18 – 750 Hz Sine Wave Output with a THD 95 dB SPL (>70 Hz) Bass capability: Max. SPL in half space at 3 THD at 1m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): Controller Design: Digital; active Crossover Frequency: 80 Hz fixed or 60 – 100 Hz via Neumann.Control Crossover Slope: 24 dB/oct; 4th order Equalisation (Low-cut): 30 Hz; 0 – -12 dB Phase: 0; 45; 90; 135 and 0/180 deg Equalisation (via Neumann.Control Software): 8 x full parametic IIR + low/high shelf global balance FIR Phase Correction: For connected analogue loudspeakers: Linear phase (170 Hz – 16 kHz; +/- 45°) Latency: 1.5 ms (A-D-A); 1.2 ms (D-A) Delay (User-adjustable Delay Range): 0 – 100 ms and 2 x 0 – 20.8 ms Output Power Woofer Amplifier (THD+N with Limiter Deactivated 10 ): 256 W Volume Control Range; Resolution (via Neumann.Control): 0 – -∞ dB; 0.1 dB Signal Routing Modes: Right; External Bass Management; 2 x LFE Input Gain Control (Sensitivity): +2 – -12 dB Output Level Control (Output Level at 1 m Based on 0 dBu Input Level): 94; 100; 108; 114 dB SPL Analogue Inputs: 2 x XLR: analogue electronically balanced Analogue Outputs: 2 x XLR; analogue electronically balanced Analogue Input Impedance: >13 kΩ Max. Input Level: CMRR: >56 dB @ 15 kHz Crosstalk (1 kHz) Level Matching: Analogue Dynamic Range; THD+N: 119 dB(A); Digital Inputs: BNC (75 Ω): AES3; S/P-DIF Digital Outputs: BNC (75 Ω): AES3 A/D Converter:Resolution; Design: 16 – 24-bit DAC; Δ∑ Sampling Rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz Dynamic Range A-D-A: >120 dB(A) Dynamic Range D-A: >123 dB(A) Mains Power Supply (Input Voltage; Frequency): 100 – 240 V ; 50/60 Hz Power Consumption (Standby / Idle / Full Output): Standby: Disabled; 90 mins (default); user defined in software Drivers Magnetically Shielded (Woofer): 265 mm (10”) Cabinet Surface Finish Colour (Custom): Painted Metallic Anthracite (RAL 7021) Baffle Cover: Included metal grille Dimensions: 383 x 330 x 383 mm Weight: 19.5 kg Product code: MA1-KH750

The post Neumann MA 1 Monitor Alignment Kit with KH 750 DSP Subwoofer appeared first on Onthedex.

Dont just hear your mix. Feel it. With the JBL LSR310S 10 Powered Studio Subwoofer you can get closer to your mixes and make sure they sound great all the way down to 27 Hz. Make your mixes compelling by bringing dynamic and responsive bass reproduction to your studio. The patented slip stream port ensures ample bass response at any volume level – you wont have to turn your monitor level all the way up to mix bass accurately. For mixing club tracks the specially tuned XLF setting emulates the bass levels used in a club. This makes it easy to optimise your mixes for any club.

More info…

Packing a punch So much power your control room might start feeling like a live room. The class D amplifier provides 200 watts of bass power. That gives you a maximum peak sound pressure level of 113 dB. Thats about as loud as a live rock show. If you need more than that in your control room you need to get your ears checked. Extensive connectivity Great bass for any studio. With a -10dBV/+4 dBu sensitivity switch a variety of sound sources can be used as the input to the subwoofer without issue. The balanced XLR and 1/4 inputs and XLR outputs offer ample connectivity for use in the studio or even as part as a large surround sound rig. Features JBL patented Slip Stream™ port XLF extended low frequency setting Custom 10-inch down-firing high excursion low frequency driver Professional balanced inputs and outputs Selectable input sensitivity Three crossover settings Built-in volume control Specifications Driver: 250mm (10-inch) High-Excursion Down-Firing Low Frequency Extension: 27 Hz Max Peak SPL: 113 dB Amplifier Power: 200 W CLass D Crossover Settings: 80 Hz XLF External Inputs: 2 x XLR 2 x TRS Balanced Outputs: 2 x XLR Maximum Peak Input Level: +20.3 dBu AC Voltage: 100-240 VAC +/- 10 50/60 Hz Dimensions (HxWxD): 448 mm x 381 mm x 398 mm (17.65 in x 15 in x 15.65 in) Weight: 15.6 kg / 34.3 lbs

The post JBL LSR310S 10 Powered Studio Subwoofer appeared first on Onthedex.

The KRK 12sHO Active Subwoofer can easily handle the sonic rigors of the surround sound arena making it an ideal match for KRKs Expos or VXT8 monitors driven to high sound pressure levels. It gives the engineer artist and producer the opportunity to experience accurate bass reproduction down to 29Hz.

More info…

Ultra-Accurate Bass Extension The KRK12sHO brings big system performance to any studio environment where ultra-accurate bass extension and maximum sound levels are required. While subsonic frequencies are heavily implemented in some musical genres all studios will benefit from the use of a sub to monitor this low frequency content. 12-Inch Kevlar Driver The KRK 12sHO cabinet features a 12-inch high excursion woven Kevlar driver cone set in a curved baffle front plate designed to virtually eliminate diffraction distortion. A front-firing specially-designed port provides low-frequency extension while reducing boundary coupling and port turbulence. Generous Frequency Range The integrated power amplifier delivers 400w RMS performance yielding a sound pressure level of 113dB music and 116dB peak. The crossover is a fixed high-pass 80Hz with a subwoofer low-pass filter control variable from 60Hz to 160Hz giving the KRK12sHO a generous frequency range of 29 to 160Hz to complement the sonic signature of any control room. Broad Connectivity Options The cabinet features combi-jack inputs thermal and overload/clip protection LFE input gain XLR outputs a special subwoofer/line bypass footswitch connection phase reverse switch and variable phase adjust capabilities. Features Curved Baffle Curved front plate design virtually eliminates diffraction distortion Front-firing Port to provide low frequency extension while reducing boundary coupling and the unique shape is optimized to avoid port turbulence Bypass Footswitch Control to allow you to defeat the sub and provide full range audio to your recording monitors for use with a standard latching 1/4 inch mono footswitch 12″ Kevlar Driver – High Excursion woven Kevlar driver cone Thermal and Overload / Clip Protection to prevent damage Input Sensitivity on rear of unit allows a high resolution gain range with labeled positions for MUTE +6dBu and -8dBu Specifications Configuration: Front loaded vented subwoofer System type: Active Subwoofer Low-Frequency: 12″ woven Kevlar High Performance woofer Frequency Response: 29.2Hz – 60Hz – 160Hz (L/R inputs) 29.1Hz – 211Hz (LFE input) Max Peak SPL: 123 dB Amplifier Class: Class A-B Power Output: 400 Watts Continuous @ 1 THD+N @ 100Hz SNR (signal to Noise Ratio): 92dB Amplifier Distortion (THD+N): Input Impedance (Ohms): 10 kΩ Balanced or unbalanced Ground Lift: On / Off Low Pass Frequency: 60Hz to 160Hz HPF bypass: with footswitch only Footswitch: Included Phase: Rotatable Phase + Polarity Switch System Volume: -30dB to +6dB Indicators: Power protection limiter Input Connectors: Balanced XLR for Left and Right Inputs LFE input: Balanced XLR Output Connectors: Stereo Balanced XLR for left and right full range with foot switch engaged 80Hz HP without foot switch engaged. AC Power Input: Selectable 110V-120V / 220V-240V Enclosure Construction: 18mm and 36mm reinforced MDF Finish: Textured Paint Port Configuration: Front Firing Quad Concentric Slot Ports Finish: Textured Paint Grille: N/A Dimensions (H x W x D): 20″ (508 mm) x 20″ (508 mm) x 22.48″ (571mm) Weight: 109.7 Lbs. (49.7 Kg.) Accessories: Footswitch for bypass operation with remote indication of bypass (clip and limit TBD) Cable for footswitch (5m) Feet – Rubber and Spikes User Guide / Warranty

The post KRK 12sHO Active Subwoofer appeared first on Onthedex.

The Behringer NEKKST K10S Studio Subwoofer is equipped with a 10″ glass-fiber woofer that delivers rich, deep, and tight bass. This subwoofer is perfect for critical listening environments as it produces clean and accurate bass. It is also designed with a variable low pass filter and phase switch, allowing for crossover alignment with stereo monitors to ensure optimal sound quality in any acoustic environment.

The front-firing port on the K10S is specifically designed to minimize boundary coupling and port turbulence, which are often issues with other systems. This design feature enhances the subwoofer’s low-frequency extension. Additionally, the K10S offers seamless connectivity with its RCA and XLR ports, allowing for easy connection to stereo monitors.

For more information about the Behringer NEKKST K10S Studio Subwoofer, click here.

The K10S subwoofer is known for its clean and accurate bass. Its front-firing port and curved baffle design contribute to the remarkable bass response, providing both cleanliness and power. The woofer is constructed with a deformation-resistant glass fiber cone and housed in a high-density composite enclosure, effectively eliminating low-frequency distortion and ensuring the most precise reproduction of low end frequencies.

Designed by Keith R. Klawitter, the founder of KRK and a renowned acoustic icon, the K10S subwoofer allows for accurate monitoring of low-end frequencies in your mixes. With an ultra-linear 300-Watt reference-class studio subwoofer, it incorporates Advanced Waveguide technology for optimal acoustic dispersion and an expansive “sweet zone”. The subwoofer’s bridge-mode amplifier allows for detailed reproduction of the full low-frequency spectrum.

The K10S subwoofer features a long-throw 10″ woofer, a variable low-pass filter, and a phase switch, enabling optimal crossover alignment with stereo monitor systems. It offers stereo inputs for mono-summed sub-bass creation and direct link outputs for connecting to stereo monitors in 2.1 speaker systems. The servo-balanced inputs are equipped with balanced XLR and unbalanced RCA connectors. The subwoofer’s enclosure is constructed with high-density composite material to minimize diffraction and reduce low-frequency distortion.

The K10S subwoofer is powered by a “Planet Earth” power supply, ensuring maximum flexibility with its wide voltage range (100-240V). It provides noise-free audio, superior transient response, and low power consumption. The subwoofer is built with high-quality components and exceptionally rugged construction to ensure a long lifespan.

Specifications:
– System Configuration: Mono
– Low Frequency Driver: 10″ Woofer
– Amplifier Type: Class-D
– Amplifier Output: 300W
– Frequency Response: 40Hz to 150Hz
– Sound Pressure Level: 117dB Maximum @ 1m
– Crossover Type: Active
– Crossover Frequency: 40 to 150Hz (variable)
– Audio Connections: 2 x XLR balanced inputs, 2 x XLR balanced thru outputs, 2 x RCA unbalanced inputs, 2 x RCA unbalanced thru outputs
– Maximum Input Level: 20dBu
– Overload Protection: Controlled Limiter
– Power Supply: 100V – 240V, 50Hz/60Hz
– Power Consumption: 50W
– Dimensions: 394 x 356 x 404mm (H x W x D)
– Weight: 17.4kg

The post Behringer NEKKST K10S Audiophile 10″ Studio Subwoofer appeared first on Onthedex.