The Tascam MM-2D is a Dante-to-analog and analog-to-Dante converter with four XLR connections. This compact and powerful piece of equipment is ideal for any Dante-reliant system because in addition to the data + PoE connector is an extra data input that also provides up to four channels supporting Dante digital audio in and output.

With powerful circuitry and ultimate DSP processing power you can be sure that your audio network will transport high quality digital audio to your analog output sources and convert analog signals into Dante-compatible digital audio latency-free and without interference.

You can configure and control the MM-2D wirelessly via the Tascam DCP Connect application and a simpler and less in-depth app Tascam EZ Connect is available to users requiring temporary control over the device.

The MM-2D is part of Tascam’s Dante Compact Processor Series and with the extra data connection you can daisy chain them. You can mount the device to your furniture with included brackets or combine two compact processors and the AK-RS1 shelf to create a 19-inch 1U rackmount.

More info…

High quality Dante converter

Dante is a specialised system that combines software, hardware, and network protocols to transport high quality digital audio and act as a power source for compatible devices. This streamlines your cable requirements to Ethernet only, allowing your equipment to stay tangle and clutter free.

With a design centered around premium circuitry and a powerful DSP processor, the MM-2D works flawlessly and without latency. For converting audio from your Dante network to your analog audio equipment, as well as sending analog line or microphone signals out to Dante equipment, the Tascam MM-2D is the perfect tool.

Featuring two female XLR mic/line inputs and two analog balanced line XLR outputs, as well as both Data and Data + PoE connectors, the MM-2D converts the two line or microphone signals into Dante compatible digital audio and vice versa. Thanks to its extensive data connection, it also supports four Dante channels that allow you to send digital files to any other device within an established Dante network.

Easy to set up and use

The MM-2D is extensively customizable with intricate digital control. You can wirelessly control the MM-2D with a Windows or Mac PC, Android, or iOS with two different software applications. Tascam MX Connect allows you to configure and fine-tune the internal mixer and the routing matrix. Tascam EZ Connect allows the end user to easily adjust volume, change scenes, and wield basic control over the inputs and outputs without changing the in-depth pre-sets of the digital mix bus. Scene pre-sets can be saved and automated with the SNTP client function.

Integrating the MM-2D into your existing setup is easy. You can attach it to furniture with included mounting brackets, discretely integrating it into your workspace. Part of the Tascam Dante Compact Processor Series, the MM-2D can be daisy chained via the extra data connector. It can also be combined with another compact processor to be fitted as a 1U 19-inch rackmount using the purpose-made AK-RS1 rackmount shelf.

Primarily powered over Ethernet (PoE), the Tascam MM-2D can also be powered by an optional (not included) 12-volt AC adapter. This adapter is powerful enough to supply two Tascam compact processors connected to each other via Ethernet, ideal for two units combined in the rackmount configuration.

For any installation, the Tascam MM-2D is the ideal Dante to analog converter with its compact size, powerful processing, and its deep and intricate customization ability. An essential item for any system running on Dante.

Features

– Compact Dante to analog and analog to Dante converter with powerful DSP processing ability provides latency-free digital audio transmission to and from an established Dante network
– Integrates seamlessly with other Tascam Dante Compact Processor Series models
– Two balanced female XLR mic/line inputs with preamps and two male XLR outputs
– Each analog input features high-quality microphone preamps with a natural sonic signature
– Power over Ethernet and additional data connection for ultimate network integration
– Controlled via Tascam MX Connect for configuration and EZ connect for end-user control
– Can be wirelessly controlled via Windows, MAC, iOS, or Android device
– Powered by PoE or a 12V AC adapter that can power two linked compact processors

Specifications

General:
– Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
– Audio outputs: Analogue inputs (ANALOG IN): MM-4D/IN-X: XLR connectors (XLR-3-31 1: GND, 2: HOT, 3: COLD)
– Minimum input level: -70 dBu
– Maximum input level: +26 dBu
– Input impedance: >2 k?
– Analogue outputs (ANALOG OUT): MM-2D: XLR connectors (XLR-3-31 1: GND, 2: HOT, 3: COLD)
– Nominal output level: +4 dBu (Ref(D) ≠ -9 dBFS), +6 dBu (Ref(D) = -9 dBFS)
– Maximum output level (selectable): +15 dBu (Ref(D): -9 dBFS), +18 dBu (Ref(D): -14 dBFS), +20 dBu (Ref(D): -16 dBFS), +22 dBu (Ref(D): -18 dBFS), +24 dBu (Ref(D): -20 dBFS)
– Input impedance: 108 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)
– Dante input to line output:
– Frequency response: 20 Hz – 20 kHz ±0.5 (sampling frequency 441/48 kHz JEITA), 20 Hz – 40 kHz ±0.5 (sampling frequency 882/96 kHz JEITA)
– Distortion (THD+N): 108 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)
– Crosstalk: >100 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)
– Dynamic range: >108 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)

Power supply and other specifications:
– Power supply: PoE class 0 (power over Ethernet), Tascam PS-P1220E AC adapter (sold separately)
– Permissible operating temperature range: 0–40 °C
– Power consumption: 7.5 W
– Dimensions (W × H × D): 214 mm × 45 mm × 136 mm (including protrusions)
– Weight: 885 g
– Product code: MM-2D-X

The post Tascam MM/2D-X – 2-Channel Mic/Line In/Out Dante Converter XLR appeared first on Onthedex.

The Tascam MM-4D/IN-X is an analog to Dante converter with four female XLR mic/line inputs. This compact and powerful piece of equipment is ideal for any Dante-reliant system because in addition to the data + PoE connector is an extra data input that also provides up to four channels supporting Dante digital audio.

With powerful circuitry and ultimate DSP processing power you can be sure that your audio network will transport high-quality digital audio to your output sources latency-free and without interference.

You can configure and control the MM-4D wirelessly via the Tascam DCP Connect application. A simpler and less in-depth Tascam EZ connect is available to users requiring temporary control over the device.

The MM-4D is part of Tascam’s Dante Compact Processor Series and with the extra data connection you can daisy chain them. You can mount the device to your furniture with included brackets or combine two compact processors and the AK-RS1 shelf to create a 19-inch 1U rackmount.

More info…

High quality Dante converter
When analog signals aren’t reliable or powerful enough to get your audio where it needs to be, you can rely on Dante to bridge the gap between the audio source and speakers. Dante is a specialized system that combines software, hardware, and network protocols to transport high-quality digital audio and act as a power source for compatible devices. This streamlines your cable requirements to Ethernet only, allowing your equipment to stay tangled and clutter-free.

With a design centered around premium circuitry and a powerful DSP processor, the MM 4D works flawlessly and without latency. To convert the audio from your analog equipment into Dante, the Tascam MM 4D/IN X is the perfect tool. Featuring four analog balanced mic/line female XLR inputs, as well as both Data and Data + PoE connectors, the MM 4D converts the four XLR line inputs to Dante output signals. Thanks to its extensive data connection, it also supports four Dante channels, allowing you to use virtually any audio source within an established Dante network. Each XLR input features proprietary Tascam mic preamps that produce a natural-sounding amplification of your microphone audio.

Easy to set up and use
The MM 4D is extensively customizable with intricate digital control. With two different software applications, you can wirelessly control the MM 4D with a Windows or Mac PC, Android, or iOS. Tascam DCP Connect allows you to configure and fine-tune your inputs and outputs, such as the built-in routing matrix and the 8×4 mixer. The mixer features a four-band EQ, gain trim, and compression for each analog and digital input, as well as a 10-band EQ and additional delay and limiting for each output. Tascam EZ Connect allows the end user to easily adjust volume, change scenes, and wield basic control over the inputs and outputs without changing the in-depth presets of the digital mix bus. Scene presets can be saved and automated with the SNTP client function, so you don’t have to.

Integrating the MM-4D into your existing setup is easy. You can attach it to furniture with included mounting brackets, discretely integrating it into your workspace. Part of the Tascam Dante Compact Processor Series, the MM-4D can be daisy chained via the extra data connector. It can also be combined with another compact processor to be fitted as a 1U 19-inch rackmount using the purpose-made AK-RS1 rackmount shelf. Primarily powered over ethernet (PoE), the Tascam MM 4D can also be powered by an optional (not Included) 12-volt AC adapter. This adapter is powerful enough to supply two Tascam compact processors connected via ethernet, ideal for two units combined in the rackmount configuration.

For any installation, the Tascam MM-4D/IN-X is the ideal analog-to-Dante converter with its compact size, its powerful processing, and deep and intricate customization ability. An essential item for any system running on Dante.

Features
– Compact analog to Dante converter with powerful DSP processing ability provides latency-free digital audio transmission across a Dante network
– Integrates seamlessly with other Tascam Dante Compact Processor Series models
– Four analog line/mic channels with female XLR inputs
– Power over Ethernet and additional data connection for ultimate network integration
– Controlled via Tascam DCP Connect for configuration and EZ connect for end-user control
– Can be wirelessly controlled via Windows, MAC, IOS, or Android device
– Powered by PoE or a 12V AC adapter that can power two linked compact processors

Specifications
General:
– Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit

Audio inputs:
– Analog inputs (ANALOG IN):
– MM-4D/IN-E: Balanced Euroblock connectors 3.81 mm pitch
– MM-4D/IN-X: XLR connectors (XLR-3-31 1: GND 2: HOT 3: COLD)
– Other inputs and outputs:
– Dante/Ethernet connectors (DATA/DATA+PoE): RJ-45
– External muting control (LED/SWITCH/GND MM-4D/IN-E only): Balanced Euroblock connectors 3.81 mm pitch
– LED connectors Output format: Open collector (10 Ω output impedance, 48 V withstand voltage, 35 mA maximum current)
– SWITCH connectors: Maximum input voltage: 5.5 V, Minimum input voltage for High level: 2.31 V, Maximum input voltage for Low level: 0.99 V

Audio performance:
– Microphone input to Dante output:
– Mic amp EIN (equivalent input noise): 100 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)
– Dynamic range: >108 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)

Power supply and other specifications:
– Power supply: PoE class 0 (power over Ethernet), Tascam PS-P1220E AC adapter (sold separately)
– Permissible operating temperature range: 0–40 °C
– Power consumption: 7.5 W
– Dimensions (W × H × D): 214 mm × 45 mm × 136 mm (including protrusions)
– Weight: 885 g
– Product code: MM-4D-IN-X

The post Tascam MM-4D/IN-X – Four Channel Input Dante Converter w/DSP XLR appeared first on Onthedex.

The Tascam ML-4D/OUT-X is a Dante to analog converter with four male XLR line outputs. This compact and powerful piece of equipment is ideal for any Dante-reliant system because in addition to the data and PoE connector is an extra data input that also provides up to four channels supporting Dante digital audio output.

With powerful circuitry and ultimate DSP processing power you can be sure that your audio network will transport high-quality digital audio to your analog output sources latency-free and without interference. You can configure and control the ML-4D wirelessly via the Tascam DCP Connect application. A simpler and less in-depth Tascam EZ Connect app is available to users requiring temporary control over the device.

The ML-4D is part of Tascams Dante Compact Processor Series and with the extra data connection you can daisy chain them. You can mount the device to your furniture with included brackets or combine two compact processors and the AK-RS1 shelf to create a 19-inch 1U rackmount.

More info…

High quality Dante converter Dante is a specialised system that combines software hardware and network protocols to transport high-quality digital audio and act as a power source for compatible devices. This streamlines your cable requirements to Ethernet only allowing your equipment to stay tangle and clutter free.

With a design centred around premium circuitry and a powerful DSP processor the ML-4D works flawlessly and without latency. To convert the audio from your Dante network to your analog audio equipment the Tascam ML-4D/OUT X is the perfect tool. Featuring four analog balanced line XLR outputs as well as both Data and Data + PoE connectors the ML-4D converts Dante input signals out to the four XLR line outputs and thanks to its extensive data connection it also supports four Dante channels that allow you to send digital files to any other device within an established Dante network.

Easy to set up and use The ML-4D is extensively customisable with intricate digital control. You can wirelessly control the ML-4D with a Windows or MAC PC Android or IOS with two different software applications. Tascam MX Connect allows you to configure and finetune the internal mixer and the routing matrix which can be bypassed. Tascam EZ Connect allows the end user to easily adjust volume change scenes and wield basic control over the inputs and outputs without changing the in-depth pre-sets of the digital mix bus. Scene pre-sets can be saved and automated with the SNTP client function.

Integrating the ML-4D into your existing setup is easy you can attach it to furniture with included mounting brackets discretely integrating it into your workspace. Part of the Tascam Dante Compact Processor Series the ML-4D can be daisy chained via the extra data connector it can also be combined with another compact processor to be fitted as a 1U 19-inch rackmount using the purpose made AK-RS1 rackmount shelf.

Primarily powered over ethernet (PoE) the Tascam ML-4D can also be powered by an optional (not Included) 12-volt AC adapter this adapter is powerful enough to supply two Tascam compact processors connected to each other via ethernet ideal for two units combined in the rackmount configuration. For any installation the Tascam ML-4D/OUT-X is the ideal Dante to analog converter with its compact size powerful processing capabilities and intricate customisation ability. An essential item for any system running on Dante.

Features
Compact Dante to analog converter with powerful DSP processing ability provides latency-free digital audio transmission across a Dante network
Integrates seamlessly with other Tascam Dante Compact Processor Series models
Four analog balanced male XLR outputs
Each analog input features high-quality microphone preamps with a natural sonic signature
Power over Ethernet and additional data connection for ultimate network integration
Controlled via Tascam MX Connect for configuration and EZ connect for end-user control
Can be wirelessly controlled via Windows MAC IOS or Android device
Powered by PoE or a 12V AC adapter that can power two linked compact processors
Specifications
General:
Number of channels and formats 4 channels 44.1 kHz 48 kHz 88.2 kHz 96 kHz 16/24 bit
Audio outputs:
Analogue outputs (ANALOG OUT): ML-4D/OUT-X: XLR connectors (XLR-3-31 1: GND 2: HOT 3: COLD)
Nominal output level: +4 dBu (Ref(D) ≠ –9 dBFS) +6 dBu (Ref(D) = −9 dBFS)
Maximum output level(selectable): +15 dBu (Ref(D): –9 dBFS) +18 dBu (Ref(D): –14 dBFS) +20 dBu (Ref(D): –16 dBFS) +22 dBu (Ref(D): –18 dBFS) +24 dBu (Ref(D): –20 dBFS)
Output impedance: 100 dB (44.1/48/88.2/96 kHz sampling frequency JEITA)
Dynamic range: >108 dB (44.1/48/88.2/96 kHz sampling frequency JEITA) Note: JEITA indicates compliance with JEITA CP-2150
Power supply and other specifications:
Power supply: PoE class 0 (power over Ethernet) Tascam PS-P1220E AC adapter (sold separately)
Permissible operating temperature range: 0–40 ºC
Power consumption: 7.5 W
Dimensions (W × H × D): 214 mm × 45 mm × 136 mm (including protrusions)
Weight: 885 g
Product code: ML-4D-OUT-X

The post Tascam ML-4D/OUT-X – Four Channel Dante Converter With DSP Mixer XLR appeared first on Onthedex.