The Yamaha MS101-4 is a 4″ monitor speaker designed to be portable and flexible to use. Its enclosure is compact so has a small footprint and is light-weight so its easy to take from place to place. This is thanks to a redesign placing the bass reflex port on the rear. Despite this the MS101 doesnt sacrifice sound quality or features. Its 30W power rating provides clear yet powerful sound so you can make informed mixing or mastering decisions (or if you want to rock out to your favourite tunes). Plus controls for volume and tone on the front make it simple to tweak the sound to suit your space. The MS101 has a combi input – XLR and jack – on its front; convenient for quick access. It also has jack inputs on the rear for more discrete more permanent connections. And there are lots of mounting options to use – from your desktop to your ceiling – so the MS101 will fit in anywhere. Please note: doesnt come with any stands or brackets – photos are for demonstrative purposes only
Monitoring with a difference Get a super-clean sound that has a super-high output. This is ensured by the MS101-4s 30W power rating driving its 4″ woofer. All within its highly optimized enclosure. Theres a wide range of connectivity too. A combi input on the front allows the connection of both jack and XLR leads. While the rear has two different size jack inputs and a line out for linking with other units. Compact and lightweight The MS101-4 has been redesigned to be more compact and lighter than previous models. So if you need monitoring and you travel a lot youll find the MS101-4 to be a solid option. By putting the bass reflex on the rear Yamahas been able to save on even more space. And this is all while having an input volume controls and tone-shaping on its front for quick access. This means you can get great sound wherever you are. Use anywhere You can place the MS101-4 on your desktop. But theres also a whole range of other options for setup. On the bottom theres a 3/8-16 threaded female mounting allowing you to attach the MS101-4 to a mic stand. Youll also find two M5 female mountings. This allows you to attach a range of separately available adapters for wall ceiling stand mounting. Features 30W power rating provides sound with power and clarity Compact enclosure designed for portable use Simple enough to get started but in-depth enough for pro use Both line and mic inputs available on front and back Flexible design for use in a variety of situations Wall-mountable ceiling-mountable mic-stand-mountable speaker-stand-mountable Re-designed enclosure with bass port on rear has a lower profile Controls on front for power volume and tone Easy-to-remove power cord makes set up and set down super quick Robust design with a sturdy metal grille on the front Specifications System Type: Full range Powered Speaker Bass-reflex Type Frequency Range (-10dB): 77Hz–20kHz Measured Maximum SPL (Peak) / Pink noise @1m: 115 dB SPL LF: Diameter: 4″ (10cm) Cone Voice coil: 1.0″ Magnet: Ferrite Dimensions (WxHxD without rubber feet): 142 x 196 x 187 mm Net Weight: 2.1 kg Screw threads (bottom): 2 x M5 depth 11mm pitch 60mm (for 2 x M5 x 6~10mm screws) 1 x 3/8″ depth 12mm (for 1 x 3/8″ x 9~11mm screw) Amplifier Type: Class-D Power Rating *1: Dynamic: 30W Continuous: 20W Cooling: Natural cooling (no fan) Connectors: Input: INPUT (Front): Combo LINE INPUT 1: Stereo mini LINE INPUT 2: Phone(TRS) Output: Phone (TRS) x1 Power: IEC AC inlet x1 Input Impedance: INPUT (Front): LINE: 5.4 kΩ MIC: 5.4 kΩ LINE INPUT 1 2: 10 kΩ Input Sensitivity (VOLUME: Maximum): INPUT (Front): LINE: -10 dBu MIC: -40 dBu LINE INPUT 1 2: -10 dBu Nominal Input Level (VOLUME: Center): INPUT (Front): LINE: +5 dBu MIC: -25 dBu LINE INPUT 1 2: +5 dBu Maximum Input Level: INPUT (Front): LINE: +20 dBu MIC: -10 dBu LINE INPUT 1 2: +20 dBu Controls: VOLUME x1 LOW CONTROL x1 HIGH CONTROL x1 POWER Indicators (LED): POWER (Green) Idle Power Consumption: 3 W 1/8 Power Consumption: 10 W Power Requirements: 100V – 240V 50/60Hz
CHECK PRICES AT ZZOUNDS
