The Yamaha HS3 Monitors are a pair of compact and lightweight studio monitors that bring the renowned sound of the HS-series to a desktop and home studio-friendly form factor. Maintaining the accuracy and full-range response of its larger counterparts the HS3 consist of one powered and one passive monitor resulting in a portable and maneuverable pair of studio monitors for musicians audio engineers and producers with a high build quality. This monitor pair offers connectivity with smartphones tablets and laptops with its stereo minijack input an RCA output for DJ controllers mixers and turntables and dual combo inputs for studio gear like audio interfaces or converters. The HS3s full frequency response comes from its detailed 3.5-inch woofer and 0.75-inch tweeter providing a balanced and even sound in even this small enclosure. With their removable design the drivers in these speakers can be easily taken out and worked on for maintenance or swapped for full repairs. These monitors also boast a flared rear bass port offering bass extension without distortion or exaggeration as well as switchable room control attenuation to lower bass response when placed near walls and high-frequency control to adjust to your room.
The HS-series goes portable Thanks to their incredibly compact form-factor and lightweight the HS3 bring the same balanced and full sound that Yamahas beloved studio monitor range have become known for to desktop setups home studios and portable productions. With only one amplified speaker cutting the weight of the pair down to almost that of a single HS5 speaker these studio monitors are configurable and usable for any space without compromising on sound quality. Broad connectivity Suitable for home recording musicians DJs producers audio engineers touring bands broadcast mixers and even just for casual listening gaming and parties the HS3 are equipped with connectivity for all occasions. Its stereo minijack input allows for direct connectivity with smartphones tablets or laptops great for editing party entertainment software-based DJing or beatmaking. Its RCA input allows for connectivity with turntables and DJ equipment whilst its dual combo XLR/TRS inputs allow for instant setup with audio interfaces mixers and recorders. No matter what your setup and why these monitors are equipped to work with it. Balanced sound but smaller Offering the same sound profile as the rest of Yamahas HS-series these monitors deliver a detailed and full sound that competes with its contemporaries and stays consistent and will be familiar to anybody whos heard the rest of the series. Thanks to their high-quality 3.5-inch woofers 0.75-inch tweeters and a flared rear port to enhance bass without distortion the HS3s punch way above their size. Features Compact studio monitors for desktop and home studio setups Maintains full and detailed sound profile from Yamahas renowned HS-series studio monitors Lightweight and portable for remote production and travelling artists Ideal for musicians audio engineers producers and video editors High-quality Class D amplifier provides up to 100 dB of maximum volume ideal for smaller workspaces Accurate and detailed 3.5-inch woofer and 0.75-inch dome tweeter provide full stereo imaging and reliable monitoring Full frequency response of 70 Hz – 22 kHz Twisted flare port design prevents bass distortion for an enhanced but controlled low-end Room control switch for taming low-end when placing monitors near walls High-trim switch can add or reduce high-frequencies for a smooth natural treble Wide-ranging connectivity from stereo minijack input for laptops tablets and smartphones plus RCA and combo jack inputs for DJ and audio production equipment One active and one passive speaker making for a more lightweight and portable monitoring solution Specifications Speaker Type: 2-way powered speaker bass-reflex type Frequency Response (-10 dB): 70 Hz – 22 kHz Frequency Response (-3 dB): 85 Hz – 20 kHz Crossover Frequency: 3.2 kHz Maximum Output Level: 100 dB SPL (Measured peak IEC noise @ 1 m) HF Driver: 0.75″ dome tweeter LF Driver: 3.5″ cone woofer Nominal Impedance: 6Ω Input Connectors: 2 x Combo (XLR/TRS Phone) input 2 x RCA input 1 x Stereo minijack input 1 x Speaker input Output Connectors: 1 x Stereo minijack headphone output 1 x Speaker output Output Power: 26 W + 26 W (Dynamic RL = 6Ω 20 W + 20 W (THD 0.1% 1 kHz RL = 6Ω) Input Sensitivity: LINE 1 (COMBO): +4 dBu LINE 2 (RCA ST Mini): -10 dBu (Volume: Maximum) Input Level: LINE 1 (COMBO): +20 dBu LINE 2 (RCA ST Mini): +6 dBu (Maximum Input) Input Impedance: LINE 1 (COMBO): 20 kΩ LINE 2 (RCA ST Mini): 10 kΩ Controls: Front: Volume Rear: ROOM CONTROL SWITCH (0/-2/-4 dB under 500 Hz) HIGH TRIM SWITCH (+2/0/-2 dB above 2 kHz) Indicators: Power On (White LED) Power Requirements: 100 – 240 V 50/60 Hz (While this product will work at a voltage of between 100 V to 240 V as limiter settings vary depending on the supply voltage make sure to use this product at the supply voltage indicated on the rear panel of this product.) Power Consumption: 15 W Cabinet Material: MDF Accessories: Stereo Mini – RCA Cable 1.5 m Speaker Cable 2.5 m Anti Slip Pad Quick Start Guide Safety Guide Dimensions (Left Speaker): Width: 132 mm (5.2″) Height: 223 mm (8.8″) Depth: 189 mm (7.4″) Dimensions (Right Speaker): Width: 132 mm (5.2″) Height: 223 mm (8.8″) Depth: 177 mm (7.0″) Weight (Left Speaker): 2.8 kg (6.2 lbs) Weight (Right Speaker): 2.1 kg (4.6 lbs)
CHECK PRICES AT ZZOUNDS
