The Yamaha DZR315 Powered Loudspeaker is a 15-inch 3-way active loudspeaker designed for commercial applications. The Yamaha DZR315 is comprised of a three-way design with a 15-inch low-frequency 8-inch mid-frequency and 2-inch high-frequency driver. The DZR315 boasts an integrated Class-D amplifier providing 2000W of maximum power and an incredible 143dB SPL. The loudspeaker delivers a powerful low-end with articulate mids and shimmering highs. The loudspeaker is equipped with 96kHz DSP processors for high-resolution sound and ultra low-latency performance. It also includes Advanced FIR-X tuning providing exceptional clarity and sound imaging. The rear of the speaker features an LCD screen with 2-channel inputs for controlling your input sources and settings.
Three-Way Class-D Amplified Design The Yamaha DZR series is the latest range of loudspeakers from Yamaha. What sets them apart from previous Yamaha loudspeakers is the innovative fully-integrated smart design. The loudspeaker is comprised of a 3-way design with a 15-inch LF driver a 2-inch HF driver and an 8-inch mid-range driver. At the heart of the DZR loudspeaker is the premium-grade Class-D amplifier providing up to 2000W (Peak) power more than enough for a wide range of applications. The LF transducer features large 3-inch voice coils in cast aluminium frames and a lightweight neodymium magnet for high power handling. It provides a tightly controlled sound resulting in distortion-free performance. The HF transducer includes a 2-inch voice coil and a 1-inch throat compression driver with a titanium diaphragm for sparkling high-end performance. The MF transducer is comprised of a 8-inch cone and a 1.5-inch voice coil provided high-end efficiency and super-low distortion for mid-range frequencies. Advanced FIR-X Tuning & 96kHz DSP Processors One of the most unique features of the DZR loudspeaker range is the integrated 96kHZ DSP processors helping to provide the high-power output the speaker delivers. The result is high-definition audio performance with super-low latency. The FIR-X Advanced Tuning technology uses linear phase FIR filters for the crossover network. The FIR filters allow you to achieve a smooth frequency response resulting in exceptional clarity and sound imaging without phase distortion. EQ filtering capabilities are also included for fine-tuning adjustments with best-in-class SPL without signal degradation. D-CONTOUR Multi-Band Compressor Another innovative feature of the DZR speaker is the built-in D-CONTOUR multi-band compressor ensuring a consistent and clear sound at any volume level. The D-CONTOUR compressor works by measuring the output of the frequency bands then applying the optimum EQ adjustment settings ensuring clear and clean sound even at high output levels. D-CONTOUR provides you with two settings: FOH/MAIN or MONITOR mode allowing for detailed tuning of your PA system. The FOH/MAIN mode helps to raise lower frequencies and compensate for low-end that can be missing when speakers are used on a monitor stand or suspended. The MONTIOR mode is designed for floor monitoring applications optimising your frequency response to match various settings. Onboard LCD Screen The rear of the loudspeaker features an onboard LCD screen providing visual monitoring and navigation of your various settings. The LCD screen is accompanied by a rotary-style control allowing you to change settings such as DSP functions as well as load presets adjust the PEQ delay and routing. You can also store up to 8 user presets of your settings allowing you to instantly recall them when needed. It also includes dedicated factory presets for optimised use with DZR and DZS XLR series speakers. Versatile Design & Connectivity The Yamaha DZR Loudspeaker range features a rotatable horn that allows for both vertical or horizontal mounting capabilities. This allows the speaker to adapt to different venue settings and acoustic dimensions. The constant directivity horns provides smooth and level coverage across your intended area minimising roll-off for optimised audio performance. The speaker cabinets are constructed from premium-grade 15mm thick plywood coated in an ultra-durable military-grade Polyuera coating. This ensures maximum protection for your internal components while in use and on the move. The enclosure also includes butterfly joints helping to reduce cabinet vibration for improved audio. The rear of the loudspeaker features 2-channel inputs comprised of XLR/TRS combination connections for microphones and a variety of other sources. It also includes an integrated USB connection for storing settings and transferring data. Features 15-inch three-way active loudspeaker 15-inch low-frequency driver 8-inch mid-frequency driver and 2-inch high-frequency driver 2-inch high-frequency driver comprised of 2-inch voice coil and 1-inch throat compression driver 8-inch mid-frequency driver for pronounced midrange 2000W Class-D Amplification High SPL of 143dB Ideal for portable and commercial applications Advanced FIR-X tuning – provides smooth frequency response for stunning clarity and sound imaging without phase distortion Powerful 96kHz DSP Processors for high-resolution sound and ultra-low latency performance D-CONTOUR multi-band compressor provides consistent and clear sound Specifications Speaker Type: 3-Way Bass-Reflex Low-Frequency Driver: 15 Woofer with 3 Voice Coil Mid-Frequency Driver: 8 Transducer with 1.5 Voice Coil High-Frequency Driver: Compression Driver with 2 Voice Coil 1 Throat Frequency Response: 31Hz – 20kHz Sound Pressure Level: 143dB Amplifier Type: Class-D Amplifier Power: 1300W RMS / 2000W Peak LF: 920W RMS / 1000W Peak MF/HF: 380W RMS / 1000W Peak Coverage: 75° x 50° (H x V) Crossover Frequency: 700Hz (FIR-X) / 2.5kHz Passive Input Connectors: 2 x XLR/TRS Combo Thru/Output Connectors: 2 x XLR Sample Frequency Rate: 96kHz and FIR Filter Handles: 2 x Aluminium Die-Cast Rigging Points: 16 x M10 Dimensions: 550mm x 897mm x 520mm (W x H x D) Weight: 41.60kg
CHECK PRICES AT ZZOUNDS
