Yamaha DHR12M 12″ Active Floor Monitor

zZounds

Yamaha DHR12M 12

The Yamaha DHR12M is a two-way bi-amp active loudspeaker with a 12-inch woofer and a 1.75-inch compression driver in a compact coaxial configuration. The DHR12M takes the advanced feature-set of Yamahas brand-new DHR series and puts it into the perfect enclosure for floor monitoring. With a 1000W amplifier and advanced new DSP technology the DHR12M is an eminently rugged and clear-sounding floor monitor. The DHR series carries the same plywood enclosure as Yamahas beloved DZR series reducing vibrations from the drivers so your performers can hear themselves at their best. Having developed cutting-edge new DSP technology Yamahas FIR-X system provides smooth dynamic linear phase FIR (finite infinite response) filters at the crossover frequency instead of the typical crossovers of other loudspeakers. This makes a smooth almost unnoticeable crossover between the powerful 12-inch woofer and the bright present coaxial compression driver while avoiding the all-too-common phase smear distortion that can muddy the sound of your venue.

More info…

FIR-X Tuning Yamahas FIR-X DSP system creates unparalleled accuracy and clarity at driver crossover frequencies. By using linear phase Finite Infinite Response filters instead of standard minimum phase filters phase smear distortion is a thing of the past. Instead of abrupt dips or boosts at crossover frequencies FIR-X allows for a clear clean transition without any loss thanks to high-quality converters. Precision DSP Yamahas new FIR-X system is just the beginning of the DSP features loaded into this floor monitor. The D-CONTOUR is a dynamic adaptive multi-band compressor that works to provide a lively but clear sound to the performers on your stage. D-CONTOUR will check the levels of certain frequency bands and correct what it hears on the fly. With two built-in modes FOH/MAIN and MONITOR. FOH/MAIN is built primarily to boost low-frequencies to account for the loss of bass when flying or pole-mounting speakers. The MONITOR mode however is built specifically with the DHR12M in mind attenuating low-frequency content so performers on-stage can hear themselves more clearly or so engineers can check monitor mixes. Maximum Output As if D-CONTOUR and FIR-X werent enough Yamaha has extended the DHR Series DSP technology down to its component level too. Having carefully and extensively tested every power amplifier and transducer in the speakers circuitry Yamaha have found a way to push every component to its maximum operable output at all times. Using DSP they have ensured that every component will work at its best but never exceed its limits providing reliable power wherever it goes. Effiency in Amplification High-efficiency Class-D amplifiers driving the Yamaha DHR Series ensure that there is unparalleled strength behind both drivers at all times. Providing a maximum SPL output of 129dB your performers wont miss even the smallest details of their playing. Onboard Mixer The DHR12M doesnt only include eye-watering power and cutting-edge DSP but it also contains a two-channel mixer for controlled use. Two channels mean two combo jacks but Channel 2 also includes a pair of stereo RCA jacks for stereo line-level input and the ability to sum both channels or bypass Channel 2 at the press of a button. Coaxial Compression Driver The compression driver is ubiquitous but the DHR12M has a fresh approach. With a coaxial design you not only get clear airy high-end but you get comfortable warm mid-range reproduction too. And all with perfect time alignment and phase so nothing is lost and your highs have the punch they need to cut through the mix. Extended warranty In addition to their standard two-year warranty Yamaha are now offering an extension of an extra two years when you register your product with your Yamaha Music ID within six months of purchasing it. Follow this link to register: https://hub.europe.yamaha.com/account?tab=products Features1.75-inch coaxial high-frequency compression driver for unparalleled detail in a monitor mix FIR-X DSP crossover for smooth frequency response throughout the whole spectrum D-CONTOUR dynamic multiband compression with two modes for optimal EQ High-efficiency Class-D amplifiers and DSP for consistently maximised output at all times without risking components breaking Onboard two-channel mixer for flexibility and compatibility with stereo line level sourcesSpecificationsSpeaker Type: 2-way Bi-amped Powered Speaker Bass-reflex Frequency Response: 55 Hz – 20 kHz Coverage Area: H90° x V60° Crossover: 1.8 kHz: FIR-X tuning (linear phase FIR filter) Maximum Output Level:129 dB SPL LF Transducer Components:Diameter: 12″ cone Voice Coil: 2.5″ Magnet: FerriteHF Transducer Components:Diaphragm: 1.75″ Type: 1″ throat coaxial compression driver Magnet: FerriteAmplifier Class: Class-D Power Rating:Dynamic: 1000 W (LF: 800 W HF: 200 W)* Continuous: 465 W (LF: 400 W HF: 65 W)Cooling: Fan cooling 4 speeds Power Consumption: 74 W (1/8power) 18 W (Idle) Power Requirements: 100 V 100-120 V 220-240 V 110/127/220 V (Brazil) 50/60 Hz Bit-Depth: 24-bit Sample Rate: 48 kHz Processors: HPF: OFF 100 Hz 120 Hz 24 dB/Oct.; D-CONTOUR: FOH/MAIN MONITOR OFF Input Connectors:2 x Combo Jack 2 x RCA Pin (Unbalanced)Output Connectors:1 x CLR3-32 (CH1 Parallel Through or CH1+CH2 Mix)Cabinet Material: Plywood Finish: Durable Polyurea Painting Black Handles: Side x 1 Pole Socket: Φ35 mm x 1 (Bottom) Floor Monitor Angle: 57° Dimensions:Width: 500 mm (19.7″) Height: 343 mm (13.5″) (with rubber feet) Depth: 454 mm (17.9″)Weight: 16.5 kg (36.4 lbs) *Total peak power of individual outputs (AC 120V 25°C). This value was measured at minimum load impedance with protection released.


CHECK PRICES AT ZZOUNDS