The Yamaha DHR-10 is a 10-inch active PA loudspeaker with the cutting-edge design befitting of a brand like Yamaha. As with all of the DHR-series speakers the custom-designed transducers within the DHR-10 are built to get the very best out of the speaker. High SPL outputs powerful bass and a precision 1.4-inch compression driver with minimal distortion and maximum clarity are par for the course with this range. The Yamaha DHR-Series boasts the same rugged plywood enclosures as their acclaimed DZR-series ensuring robust and powerful performance from them with minimal vibration from the enclosure getting between you and the performance. With cutting-edge DSP technology Yamaha have developed FIR-X specifically for this range of speakers. This means that instead of the typical crossover filters seen in most loudspeakers linear phase FIR (finite impulse response) filters will provide a consistent phase and frequency response whilst also adjusting the time alignment between the HF and LF transducers. This minimises phase distortion and means that the dips and peaks typically seen around the crossover frequency are prevented in favour of a clear defined transition unlike any youve heard before.
Whats Included?2 x Yamaha DHR10 10″ Active PA Speakers 2 x Gear4music PA 35 mm Speaker Stands 1 x Gear4music Carry BagFIR-X Crossovers Unlike most typical crossovers the development of Yamahas FIR-X tuning system means that the frequency response of your loudspeaker stays as even clear and fresh as it does throughout the rest of the frequency spectrum at the crossover frequency. Dynamically adjusting phase and time alignment prevents phase smear distortion from ruining your mix or your performance. Precision DSP Yamahas new FIR-X system provides clarity and better imaging throughout crossover areas however this isnt the only DSP in the series. The D-CONTOUR is an intelligent multi-band compressor that works to provide the flattest achievable frequency response – so your mix or your performance – sounds as clear and lively as it should. D-CONTOUR constantly monitors the output of multiple frequency bands and adjusts them accordingly to provide detailed tuning. With two modes FOH/MAIN – which boosts low-frequencies to compensate for the loss of bass that happens whilst suspending or placing your speakers on stands for clear articulated bass. MONITOR mode is built for monitoring taming low-frequency content to give crystal clear monitoring for engineers and performers alike. Maximum Output FIR-X and D-CONTOUR are not the only advanced DSP used in this series however. Yamaha have also carried out precision tests on current and legacy loudspeakers to optimise the performance of every transducer and power amplifier in the circuit meticulously measuring the limits of each component and setting DSP control to these limits. This assures safe reliable and powerful operation under even the most challenging conditions with every part of the speaker built to last and protected from overloading the DHR-series have dependability like no other. Effiency in Amplification The DHR-series high efficiency Class-D amplifiers are capable and powerful managing to produce a 700 W power output and a maximum SPL of 128 dB from a 10-inch driver. With this kind of power you can be sure everything will be heard throughout any venue. Onboard Mixer As with all DHR-Series speakers the DHR10 also contains an intuitive 2-channel mixer on the back featuring two combo jacks and a pair of RCA inputs for connectivity with CD players and other stereo line-level sources while still keeping Channel 1 free for other inputs. It also contains a switchable selection that lets you choose to mix the signal of Channels 1 and 2 or to just accept Channel 1. Rotatable High-Frequency Horn and U-Bracket Specific to the DHR10 this speaker also has a 90° rotatable high-frequency horn for consistent clarity and response whether placed vertically or horizontally. With an additional optional U-bracket for mounting the DHR10 is capable of fitting wherever you need it. Extended warranty In addition to their standard two-year warranty Yamaha are now offering an extension of an extra two years when you register your product with your Yamaha Music ID within six months of purchasing it. Follow this link to register: https://hub.europe.yamaha.com/account?tab=products FeaturesRotatable high-frequency compression driver for vertical or horizontal operation and bright treble Optional U-bracket for mounting FIR-X DSP crossover for smooth frequency response throughout the whole spectrum D-CONTOUR dynamic multiband compression with two modes for optimal EQ High-efficiency Class-D amplifiers and DSP for consistently maximised output at all times without risking components breaking Onboard two-channel mixer for flexibility and compatibility with stereo line level sourcesSpecificationsSpeaker Type: 2-way Bi-amped Powered Speaker Bass-reflex Frequency Response: 52 Hz – 20 kHz Coverage Area: H90° x V60° (Rotatable) Crossover: 1.9 kHz: FIR-X tuning (linear phase FIR filter) Maximum Output Level: 128 dB SPL LF Transducer Components:Diameter: 10″ cone Voice Coil: 2″ Magnet: FerriteHF Transducer Components:Diaphragm: 1.4″ Type: 1″ throat compression driver Magnet: FerriteAmplifier Class: Class-D Power Rating:Dynamic: 700 W (LF: 500 W HF: 200 W)* Continuous: 325 W (LF: 260 W HF: 65 W)Cooling: Fan cooling 4 speeds Power Consumption: 60 W (1/8power) 18 W (Idle) Power Requirements: 100 V 100-120 V 220-240 V 110/127/220 V (Brazil) 50/60 Hz Bit-Depth: 24-bit Sample Rate: 48 kHz Processors: HPF: OFF 100 Hz 120 Hz 24 dB/Oct.; D-CONTOUR: FOH/MAIN MONITOR OFF Input Connectors:2 x Combo Jack 2 x RCA Pin (Unbalanced)Output Connectors:1 x CLR3-32 (CH1 Parallel Through or CH1+CH2 Mix)Cabinet Material: Plywood Finish: Durable Polyurea Painting Black Handles: Top x 1 Pole Socket: Φ35 mm x 1 (Bottom) Rigging: Top x 2 Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts) Dimensions:Width: 305 mm (12.0″) Height: 494 mm (19.5″) (with rubber feet) Depth: 300 mm (11.8″)Weight: 15.0 kg (33.1 lbs) Accessory Options: U-Bracket: UB-DXRDHR10 *Total peak power of individual outputs (AC 120V 25°C). This value was measured at minimum load impedance with protection released.
CHECK PRICES AT ZZOUNDS
