The upgraded sE Electronics sE-T2 is a large condenser microphone with a titanium-sputtered dual-diaphragm capsule. This microphone will revolutionise your approach to engineering and production. With a wide frequency range of 20Hz to 20kHz the sE-T2 will capture every last nuance of any performance. The sE-T2s high-frequency response is incredibly natural. Rest assured knowing your performances will not sound excessively bright. The microphone is the ideal choice for recording kick drums pianos pop vocalists as well as amplifiers. Youll find that due to its balanced low and mid frequencies the sE-T2 responds well to any form of EQ. Featuring a brand new die-cast all metal housing and a reinforced spring steel wire mesh grille. This update provides the microphone with ultimate durability whilst in use. Further improvements include a polished finish and an upgraded shock mount.

More info…

Loud and clear One of the perks of using a solid-state microphone is its lightning-fast response to transients. Youll be able to capture loud percussive sounds without the fear of saturation or loss of detail. This is down to the sE-T2s titanium capsule. Stronger than any gold spluttered capsule the T2 stands its ground against instruments with high SPLs. Place it right in front of any source knowing its performance will be nothing short of excellent. Reworked and refined sE have remodelled the T2 with a brand new die-cast all metal housing and a reinforced spring steel mesh grille that both protect the capsule and give the whole microphone a sturdy and robust build. A new polished finish gives the microphone a clean and professional aesthetic. sE have gone to lengths to improve the shockmount as well. It is designed to be as low profile as possible and not get in the way of equipment. The shockmount is designed to assist the angling of the microphone it minimises the risk of low-end rumble ruining your recordings and allows you to get near to any source. Youll be able to record up close without compromise. Features Upgraded version with a polished die-cast body robust spring steel mesh grille and improved shockmount Titanium capsule captures the punch and impact of percussive sources Controls to dial the mic into your application 4 polar patterns: cardioid supercardioid omni and figure-8 2 pre-attenuation pads 2 highpass filters Frequency Response: 20Hz-20KHz Requires +48V phantom power Includes flight case Specifications Frequency Response: 20Hz-20KHz Sensitivity: 28mv/pa-31 ± 1dB Polar Pattern: Omni Cardioid supercardioid Figure 8 Impedance: ≤ 50 Ohms Equivalent Noise Level: 14dB(A weighted) Max SPL for 0.5 THD@1000Hz for 0.5 : 140dB minimum Power Requirement: Phantom power 48V±4V Connector: 3-pin Dimensions and weight: Microphone: 5.8 x 2.9 x 14.6 cm ( L x W x H ) 0.29kgShock Mount: 0.22kgFlight Case: 30.3 x 19 x 13.3 cm ( L x W x H ) 1.415kgProduct Code: SE-T2-2022

The post sE Electronics T2 Microphone appeared first on Onthedex.

The sE Electronics SE2200 VE Large-Diaphragm Condenser Microphone provides exceptionally detailed sound thanks to a unique microphone capsule and transformer. Along with input attenuation and filter switches – youre never far from the sound you want. This version of the SE2200 features a limited-edition vintage-style design reminiscent of gear from the 70s and 80s. The special edition design features a green hammered finish and polished chrome grill and it is only available for 2021 so get it while you can! With high sensitivity and a low noise floor. The SE2200 is the perfect blend between power and practicality. Utilising the finest components and Class-A circuitry you can rest assured knowing your recordings will sound bigger and bolder than ever before. From vocals to instruments the SE2200 can do it all. Get the sound right at the source. The inclusion of a pad switch is excellent when recording instruments such as cabinets and drums. This reduces the microphones sensitivity minimising the risk of clipping and intermodulation distortion. The onboard filter switch immediately tackles low-end rumble and unwanted background noise for improved acoustic performance.

More info…

A classic reimagined The sE Electronics sE2200 VE is the latest version of the highly renowned condenser microphone that put sE Electronics in high-regard with the audio world. The microphone was made famous by musical legends such as Amy Winehouse helping to revitalise the spirit of classic studio mics. The sE2200 is renowned for its polished and smooth sound capturing every nuance of your source audio perfect for studio vocal recordings. Handcrafted one-inch capsule At the heart of the sE2200 VE is the hand-crafted and custom tuned condenser capsule. The one-inch true condenser capsule is used in conjunction with dual gold-sputtered diaphragms to achieve optimal acoustic performance. The externally polarised capsule provides optimal audio performance at every step. Traditional Class-A electronics sE Electronics have carefully selected the premium-grade components to ensure the best possible audio performance and sound quality. The fully discrete components do not use any integrated circuits ensuring consistent low noise performance and high sensitivity for a range of recording applications. The components are surface-mounted with tight tolerances ensuring maximum signal integrity for incredible accuracy. Custom output transformer Capturing the essence of classic studio mics the sE2200 VE features a custom transformer which results in exceptional depth to the overall sonic image. This provides an immersive stereo field putting you in the centre of the sound for impressive sonic results. The shielded metal housing provides noise-free operation keeping the signal tight and clean. Switchable attenuation and low-cut filters One of the most convenient yet versatile features of the sE2200 VE is the switchable attenuation levels. The switch features both -10dB and -20dB pad switches providing extended dynamic range for a variety of recording applications. This allows you to use the microphone for everything from studio-grade vocal recordings to capturing electric guitars and even drum overheads. The microphone also includes dual low-cut filter helping to minimise and eliminate low-frequency rumble and unwanted noise. It also helps to compensate for excessive bass when used in close proximity to the sound source ideal for recording vocals. Robust sleek design The sE2200 VE not only looks the part. It is designed to handle the rigors of extensive studio and stage use. The all-metal housing ensures optimal durability as well as efficient rejection of electrical interference and noise. It features a gold-plated XLR connector for a reliable signal connection ensuring a long-life span. Isolation pack accessory bundle Bundles with the microphone is the sE Electronics Isolation Pack. The Isolation Pack is comprised of sE Electronics’ renowned curved metal pop filter and high-quality shock mount. These are the perfect companion for your sE2200 not only looking uniformed with the rest of the microphone but helping to improved audio performance. The curved pop filter helps to eliminate sibilance and plosive noises while the shock mount ensures the microphone remains stable while recording eliminating any handling or movement-born noise. Features Premium-grade large-diaphragm condenser microphone Hand-crafted one-inch true condenser capsule Traditional Class-A electronics Two switchable attenuation levels Custom-built output transformer Two switchable low-cut filters All-metal housing and premium-grade finish Gold-plated XLR connector Complete with custom-made shock mount pop filter and thread adapter Specifications Capsule: Hand-crafted 1-inch true condenser capsule Polar Patterns: Cardioid Frequency Range: 20 – 20000 Hz Sensitivity: 23.7 mV/Pa (-32.5 dBV) Max. SPL (0.5 THD): 125 / 135 / 145dBSPL (0/10/20 dB Attenuation pad) Equivalent Noise Level: 12 dB(A) Dynamic Range: 113 / 123 / 133 dB (0/10/20 dB Attenuation pad) Signal-to-noise Ratio: 82 dB Low Cut Filter: 80 / 160Hz 6 dB/Oct switchable Attenuation Pad: 10 / 20 dB switchable Powering: 48 Volts according to IEC 61938 Electrical Impedance: Recommended Load Impedance: >1k Ohms Current Consumption: 4.2 mA Connectivity: 3-pin male XLR connector Dimensions: Diameter: 51 mm (2.01 in.) Length 215 mm (8.46 in.) Weight: 611 g (21.55 oz.) Product Code: sE2200-VE

The post sE Electronics sE2200 VE Large-Diaphragm Condenser Microphone appeared first on Onthedex.

The sE Electronics SE2200 Large-Diaphragm Condenser Microphone provides exceptionally detailed sound thanks to a unique microphone capsule and transformer. Along with input attenuation and filter switches – youre never far from the sound you want. With high sensitivity and a low noise floor. The SE2200 is the perfect blend between power and practicality. Utilising the finest components and Class-A circuitry you can rest assured knowing your recordings will sound bigger and bolder than ever before. From vocals to instruments the SE2200 can do it all. Get the sound right at the source. The inclusion of a pad switch is excellent when recording instruments such as cabinets and drums. This reduces the microphones sensitivity minimising the risk of clipping and intermodulation distortion. The onboard filter switch immediately tackles low-end rumble and unwanted background noise for improved acoustic performance.

More info…

A classic reimagined The sE Electronics sE2200 is the latest version of the highly renowned condenser microphone that put sE Electronics in high-regard with the audio world. The microphone was made famous by musical legends such as Amy Winehouse helping to revitalise the spirit of classic studio mics. The sE2200 is renowned for its polished and smooth sound capturing every nuance of your source audio perfect for studio vocal recordings. Handcrafted 1-inch capsule At the heart of the sE2200 is the hand-crafted and custom tuned condenser capsule. The 1-inch true condenser capsule is used in conjunction with dual gold-sputtered diaphragms to achieve optimal acoustic performance. The externally polarised capsule provides optimal audio performance at every step. Traditional Class-A electronics sE Electronics have carefully selected the premium-grade components to ensure the best possible audio performance and sound quality. The fully discrete components do not use any integrated circuits ensuring consistent low noise performance and high sensitivity for a range of recording applications. The components are surface-mounted with tight tolerances ensuring maximum signal integrity for incredible accuracy. Custom output transformer Capturing the essence of classic studio mics the sE2200 features a custom transformer which results in exceptional depth to the overall sonic image. This provides an immersive stereo field putting you in the centre of the sound for impressive sonic results. The shielded metal housing provides noise-free operation keeping the signal tight and clean. Switchable attenuation and low-cut filters One of the most convenient yet versatile features of the sE2200 is the switchable attenuation levels. The switch features both -10dB and -20dB pad switches providing extended dynamic range for a variety of recording applications. This allows you to use the microphone for everything from studio-grade vocal recordings to capturing electric guitars and even drum overheads. The microphone also includes dual low-cut filter helping to minimise and eliminate low-frequency rumble and unwanted noise. It also helps to compensate for excessive bass when used in close proximity to the sound source ideal for recording vocals. Robust sleek design The sE2200 not only looks the part. It is designed to handle the rigors of extensive studio and stage use. The all-metal housing ensures optimal durability as well as efficient rejection of electrical interference and noise. It features a gold-plated XLR connector for a reliable signal connection ensuring a long-life span. Isolation pack accessory bundle Bundles with the microphone is the sE Electronics Isolation Pack. The Isolation Pack is comprised of sE Electronics’ renowned curved metal pop filter and high-quality shock mount. These are the perfect companion for your sE2200 not only looking uniformed with the rest of the microphone but helping to improved audio performance. The curved pop filter helps to eliminate sibilance and plosive noises while the shock mount ensures the microphone remains stable while recording eliminating any handling or movement-born noise. Features Premium-grade large-diaphragm condenser microphone Hand-crafted 1-inch true condenser capsule Traditional Class-A electronics Two switchable attenuation levels Custom-built output transformer Two switchable low-cut filters All-metal housing and premium-grade finish Gold-plated XLR connector Complete with custom-made shock mount pop filter and thread adapter Specifications Capsule: Hand-crafted 1-inch true condenser capsule Polar Patterns: Cardioid Frequency Range: 20 – 20000 Hz Sensitivity: 23.7 mV/Pa (-32.5 dBV) Max. SPL (0.5 THD): 125 / 135 / 145dBSPL (0/10/20 dB Attenuation pad) Equivalent Noise Level: 12 dB(A) Dynamic Range: 113 / 123 / 133 dB (0/10/20 dB Attenuation pad) Signal-to-noise Ratio: 82 dB Low Cut Filter: 80 / 160Hz 6 dB/Oct switchable Attenuation Pad: 10 / 20 dB switchable Powering: 48 Volts according to IEC 61938 Electrical Impedance: Recommended Load Impedance: >1k Ohms Current Consumption: 4.2 mA Connectivity: 3-pin male XLR connector Dimensions: Diameter: 51 mm (2.01 in.) Length 215 mm (8.46 in.) Weight: 611 g (21.55 oz.) Product Code: sE2200

The post sE Electronics SE2200 Large-Diaphragm Condenser Microphone appeared first on Onthedex.

The sE Electronics sE8 Condenser Microphone is the latest professional-grade studio microphone from SE bringing with it a host of new features that give it a place at the top of its class. A handmade capsule with an ultra-thin gold-sputtered diaphragm adorns the top of the microphone providing incredible transient response suitable for a wide variety of sound sources. Despite the thin diaphragm the sE8 is capable of recording up to a maximum SPL of 159dB(A) in case you ever felt the need to close-mic a fighter jet. Combine this with the two switchable attenuation pads and low-cut filters and you have one of the most versatile small diaphragm condensers available. This ultra-quiet (only 13dB(A)) and flexible microphone delivers clear balanced sound without colouration and is the ideal choice for studio and live sound engineers requiring an adaptable recording solution the world-over.

More info…

New Capsule Design Carefully crafted in sEs laboratories the sE8 incorporates a new backplate design into its construction. No matter how much EQ or filtering you apply this new design prevents harshness whilst simultaneously providing you with the highest dynamic range and SPL handling in its class. On top of this the sE8 features a hand-crafted gold-sputtered capsule with an ultra-thin diaphragm that has been tuned to perfection by technicians with decades of experience. This new capsule is built in a manner reminiscent of the worlds finest musical instruments and is truly worthy of recording them. -10dB/-20dB Pad The pad switch can be used if youre recording a very hot or loud signal. For miking up loud sound sources such as drums or a guitar cabinet the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp ensuring a high quality signal is delivered. Switchable 80Hz/160Hz Lo-Cut/Hi-Pass Filter The sE8 incorporates a handy lo-cut/hi-pass switchable filter into its circuitry. 80Hz or 160Hz lo-cut can be applied to decrease the level of proximity effect which is typical behaviour in cardioid pattern microphones if placed very close to the sound source or to isolate from low frequency rumble from other sources. High Performance Electronics The sE Electronics sE8 has been designed with a super-short signal path with no ICs and using only the best specially optimized Class-A electronics. As a result the sE8 is one of the quietest small diaphragm condensers you can buy and by far the quietest in its class. What Professionals Have Said “Sounds like a wickedly expensive high-end microphone.” – Bernhard Schurian Planet Music & Media Magazine “I recorded violin and it just did what it should do! A clear sound with warm highs it reproduces the natural sound of the instrument as it should be. Its a beauty in a perfect size easy to place wherever it needs to be placed!” – Titus Vadon Recording Engineer & Producer “The sE8s on the high-hats are a very big surprise. I have been looking forward for that crisp sound without the over-hyped top end…I was picking up subtle hits and ghost notes that had not been that well defined before. Overall I am very impressed.” – Gary Sharpe TM-FOH Between The Buried And Me TM-FOH – Every Time I Die In The Box sE Electronics sE8 Microphone x 2 Wind Screen x 2 Mic Clip With Thread Adapter x 2 Stereo Bar Metal Case sE Logo Sticker User Manual With Warranty Card Specifications Capsule: hand-Crafted Small Diaphragm True Condenser Capsule Polar Patterns: Cardioid Frequency Range: 20Hz – 20kHz Sensitivity: 25 mV/Pa (-32dBV) Max SPL (0.5% THD): 139/149/159dB SPL (0/10/20 dB Attenuation Pad) Equivalent Noise Level: 13 dB(A) Dynamic Range: 126/136/146dB (0/10/20 dB Attenuation Pad) Signal-To-Noise Ratio: 81dB Low-Cut Filter: 80Hz/160Hz 6dB/Oct Switchable Attenuation Pad: 10dB/20dB Switchable Powering: 48V According To IEC 61938 Electrical Impedance: 110 Ohms Recommended Load Imepdance: >1k Ohms Current Consumption: 2.7mA Connectivity: Gold-Plated 3-Pin Male XLR Dimensions: 23mm x 120mm / 0.91 x 4.72 (D x L) Weight: 141g / 4.97oz.

The post sE Electronics sE8 Condenser Microphone Matched Pair appeared first on Onthedex.

The sE Electronics sE-4400 Studio Condenser Mic is a versatile condenser mic that has four polar pattern options to choose from – allowing you to adapt to any sound source. From recording vocals and guitar cabs to capturing the nuances of a piano performance the sE4400 is a must-have for any professional recording artist/engineer. Featuring a hand-crafted 1-inch dual-diaphragm gold-sputtered condenser capsule; the microphone delivers exceptional audio fidelity capturing every detail with extreme sonic precision. Vintage design meets modern innovation with the sE4400 featuring dedicated metal switches for selecting between polar patterns as well as the onboard controls. Toggle between two pre-attenuation pads to compensate for loud volume levels – ideal for recording guitars drums and brass instruments. The sE4400A also features two low-cut filters which help to minimise unwanted low-frequency rumble. The classic-style design features robust dent-proof metal housing with a rugged spring steel wire mesh grille to ensure maximum durability. The microphone also comes complete with a premium-accessory package including a metal storage case a shockmount thread adapter and more. If youre looking for a highly versatile microphone look no further than the sE4400A.

More info…

Four polar patterns – adapt to any sound source Comprised of: Cardioid Hypercardioid Figure of 8 and Omni the sE4400 features four varying polar patterns to choose from. The four different polar patterns help the microphone adapt to any sound source making it one of the most versatile microphones on the market. The flat round-edged chassis design allows the mic to be used flat onto a drumhead or guitar cab or pushed near the skin of a kick drum. At the heart of the sE4440 is a hand-crafted dual-diaphragm gold-sputtered condenser capsule which delivers an ultra-wide frequency range and exceptional clarity. The resulting sound delivers sparkling highs and a powerful low-end capturing every detail of your performance in stunning detail. Switchable attenuation pad and low-cut filter The onboard controls allow you to attenuate your sound to get the best possible recording every time. The switchable pre-attenuation pads feature two settings providing an extended dynamic range that is ideal for louder sound sources such as guitars drums and even brass instruments. The switchable low-cut filter features two varying settings which help to eliminate the proximity effect when miciing at close range minimise unwanted low-end rumble for clear and detailed sound. Complete with metal storage box shockmount and more The sE4400 also comes complete with a premium-quality accessory package which includes everything you need to record and maintain your microphone. A metal storage case is included which helps to protect your mic when on the move or not in use at home. Also included is a robust shockmount and thread adapter which allows for hands-free recording when attached to a microphone stand. To complete the accessory package sE Electronics also include an sE logo sticker and a user manual with a manufacturer warranty card. Features Four switchable polar patterns Cardioid Hypercardioid Omni Figure-8 Gold sputtered dual-diaphragm condenser capsule Switchable pre-attenuation pad provides extended dynamic range with two pad settings Two switchable low-cut filters Dent-proof metal housing with premium-quality finish Ideal for vocals drums pianos guitar cabs and more Complete with shock mount metal storage case and other accessories Specifications Frequency Response: 20Hz-20KHz Sensitivity: 14.1mv/pa-37db ± 1dB Polar Pattern: Cardioid Figure 8 Omni supercardioid Impedance: – 50 Ohms Equivalent Noise Level: 17dB(A weighted) Max SPL for 0.5 percent THD@1000Hz: 130dB Power Requirement: Phantom power 48V±4V Connector: 3-pin Product Code: se4400-2022

The post sE Electronics sE4400 Condenser Microphone appeared first on Onthedex.

The Behringer XM1800S is a set of three dynamic microphones and a hard case perfect for starting your recording or live setup. Dynamic microphones are an essential for live performance and recording.

Thanks to Behringers XM1800S Ultravoice Dynamic Microphone 3 Pack youll have a set of versatile microphones which serve to provide you with excellent high quality results night after night. Their super-cardioid polar pattern design ensures a tight and focused sound with minimal bleed from off-axis sources. This is especially useful for ensuring vocals cut through dense mixes or if the vocalist plays an instrument simultaneously.

The bundle includes a protected padded hard-case built to withstand the hardships of continued use and touring. As well as this theres three microphone stand adapters. Thanks to Behringer youll be presented with a premium quality package ideal for a wide range of applications.

More info…

The ideal choice for live sound Dynamic microphones are designed to be robust durable and resitant to damage and moistureand are able to withstand the most powerful of voices. The XM1800s super-cardioid design provides you with a tight sound. This is ideal for a focused capture whilst rejecting ambience from unwanted off-axis sources. Because of the tight pick up pattern the XM1800S are an excellent choice to use on musicians who play an instrument whilst singing.

Behringer make your job easier ensuring that every voice is heard and resonates with the listener.

A great all round package As well as the three dynamic XM1800S mics the pack also includes an impact-resistant carry case microphone clips and stand adapters. Behringer have included these accessories to provide the key essentials youll need for transporting and setting up your microphones. The impact-resistant carry case is designed to offer added durability and a safe way of transporting your microphones minimising any damage.

Features Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance Ultra-wide frequency response for brilliant and transparent sound Extremely high signal output lets your voice cut through Cardioid characteristic minimizes background noise and feedback Convenient on/off switch to mute during breaks Integrated spherical wind and pop noise filter Microphone stand adapter and impact-resistant carrying case included Conceived and designed by Behringer Germany

Specifications Type: Cardioid Dynamic Microphone Impedance: 600 ohms Sensitivity: -52dBV (0 dBV = 1V/Pa) 2.5mV/Pa Frequency Response: 80Hz – 15kHz Connector: Gold-Plated XLR Weight: Approx. 230g Product Code: XM1800S

For more information on the XM1800S please refer to the PDF above.

The post Behringer XM1800S Ultravoice Dynamic Microphone 3 Pack appeared first on Onthedex.

The Behringer XM8500 Ultravoice Dynamic Microphone is a powerful tool for vocalists of all levels. Its accuracy, precision, and clarity make it ideal for both live performances and home recording. Behringer is known for their exceptional build-quality, ensuring that you won’t have to worry about feedback, handling noise, or hissing interfering with your performance. The XM8500 is especially popular with beginners looking to take their skills to the next level.

You can find more information on the Behringer XM8500 microphone at this link: [More info…](https://www.awin1.com/pclick.php?p=36679395201&a=107253&m=1117)

The Behringer XM8500 is designed to bring your vocals to life. Whether you’re a trained vocalist or just starting out, this microphone offers a wide range of features. Its unique cardioid pickup patterns, ultra-wide frequency response (50Hz – 150Hz), and smooth mid-frequency presence rise ensure clear and precise vocal projection. The XM8500’s transparent sound cuts through the mix and eliminates off-axis sound, giving your vocals the spotlight they deserve.

The XM8500 is built to handle high-performance situations. It tackles the difficulties of capturing vocals with ease. An integrated two-stage spherical filter minimizes wind and pop noise, while the cardioid pickup delivers exceptional feedback rejection. With the XM8500, you can focus on your performance without worrying about technical issues.

Dependability is key when it comes to microphones, whether you’re on the road or recording at home. The Behringer XM8500 delivers that dependability every time. Its robust metal housing, steel mesh windshield, and sturdy hardcase ensure it can withstand the rigors of travel and everyday use. Plus, it features improved moisture resistance, so you can confidently use it in any situation.

Key features of the Behringer XM8500 include excellent vocal projection with a smooth mid-frequency presence, an ultra-wide frequency response for brilliant and transparent sound, high signal output for clarity, background noise and feedback reduction through its cardioid characteristic, a shock mount system to minimize handling noise, an integrated spherical wind and pop noise filter, and it comes with a microphone stand adapter and impact-resistant carrying case.

Designed and engineered in Germany by Behringer, the XM8500 is a cardioid dynamic microphone with an impedance of 150 Ohms and a sensitivity of -70dB. Its frequency response ranges from 50Hz to 15kHz, and it features a gold-plated XLR connector. The microphone weighs approximately 240g, making it lightweight and easy to handle.

The post Behringer XM8500 Ultravoice Dynamic Microphone appeared first on Onthedex.

The XLR (F) – XLR (M) Microphone Cable is the ultimate choice for stage and studio applications. With this cable in your rig youll be able to connect microphones direct/re-amp boxes to either your interface desk or mixer. Thanks to its PVC jacket and insulation electrical interface will be kept to a minimum guaranteeing maximum signal integrity.

More info…

Specifications Cable Length: 1m Connector 1: XLR Connector 2: XLR Diameter: 6mm Colour: Black Product Code: XLR1MXLR Music is for everyone so we’re making it easier for you to start playing. Backed by our years of professional experience the Gear4music range gives you access to a vast collection of instruments audio gear and accessories. Produced ethically and responsibly theyre suitable for every musical interest while meeting the expectations of a caring world. There’s never been a better time to start making music.

The post XLR (F) – XLR (M) Microphone Cable 1m appeared first on Onthedex.

The Essentials XLR Microphone Cable 9m is ideal for hobbyists and home recordists. Suitable for connecting your monoaural instruments to an XLR input the XLR (M) to Jack Cable 9m will excel in its application.

More info…

Specifications Length: 9m Connections: Male XLR – 6.35mm / 1/4″ Jack in metal enclosures Cable type: PVC jacket around 0.12×20 insulated conductors Music is for everyone so we’re making it easier for you to start playing. Backed by our years of professional experience the Gear4music range gives you access to a vast collection of instruments audio gear and accessories. Produced ethically and responsibly theyre suitable for every musical interest while meeting the expectations of a caring world. There’s never been a better time to start making music.

The post Essentials XLR Microphone Cable 9m appeared first on Onthedex.

The XLR (F) – Jack Microphone Cable is a high quality noiseless and oxygen free one metre female XLR to straight jack cable that also incorporates a strain relief spring system jack plug.

More info…

Features/Specifications Heavy Duty XLR Connector Noiseless Oxygen Free Strain Relief Spring Jack Pin 2 Positive Length: 1m Colour: Black Music is for everyone so we’re making it easier for you to start playing. Backed by our years of professional experience the Gear4music range gives you access to a vast collection of instruments audio gear and accessories. Produced ethically and responsibly theyre suitable for every musical interest while meeting the expectations of a caring world. There’s never been a better time to start making music.

The post XLR (F) – Jack Microphone Cable 1m appeared first on Onthedex.