The Dynacord SL 2400 is a dual 1200 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 1200 W or less, the SL 2400 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system.

The SL 2400 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification. The SL 2400 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound. The SL 2400 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 1200 W power amplifier for powering passive PA speakers
– Three impedance options from 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 1800 W at 2 ohms, 1200 W at 4 ohm, and 750 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1% 1 kHz: 1800 W (@ 2 ohm load impedance), 1200 W (@ 4 ohm load impedance), 750 W (@ 8 ohm load impedance)
– Rated Output Power THD < 0.1% 20 Hz to 20 kHz: 1100 W (@ 4 ohm load impedance), 550 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A: 3400 W (@ 2 ohm load impedance), 1800 W (@ 4 ohm load impedance), 950 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz: 2400 W (@ 2 ohm load impedance), 1500 W (@ 4 ohm load impedance), 850 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power THD = 1% 1 kHz: 3600 W (@ 4 ohm load impedance), 2400 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing THD = 1% 1 kHz: 90.6 V
– Power Bandwidth THD = 1% ref. 1 kHz half power @ 4 ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8 ohm 1 kHz: +6.6 dBu (1.66 V RMS)
– THD at rated Output Power MBW = 80 kHz 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz 7 kHz: < 0.1%
– DIM30 3.15 kHz 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 30 V/µs
– Signal to Noise Ratio A-weighted: > 110 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 850 W
– Mains Fuse: 240 V / 230 V: T15AH; 120 V / 100 V: T30AH
– Protection: Audio limiters, High temperature, DC, HF Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 17.7 kg (39.0 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 2400 2 x 1200W Power Amp appeared first on Onthedex.

The Dynacord SL 900 is a dual 450 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 450 W or less, the SL 900 is a stable and reliable amp for mobile and installation sound alike.

The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 900 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean clear amplification: The SL 900 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact, but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound: The SL 900 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 450 W power amplifier for powering passive PA speakers
– Three impedance options from 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 650 W at 2 ohms, 450 W at 4 ohm, and 270 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1%, 1 kHz:
– Dual Channel: 650 W (@ 2ohm load impedance), 450 W (@ 4ohm load impedance), 270 W (@ 8ohm load impedance)
– Rated Output Power THD < 0.1%, 20 Hz to 20 kHz:
– 400 W (@ 4ohm load impedance), 200 W (@ 8ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A:
– 1150 W (@ 2ohm load impedance), 660 W (@ 4ohm load impedance), 350 W (@ 8ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz:
– 850 W (@ 2ohm load impedance), 540 W (@ 4ohm load impedance), 310 W (@ 8ohm load impedance)
– Maximum Bridged Output Power THD = 1%, 1 kHz:
– 1300 W (@ 4ohm load impedance), 900 W (@ 8ohm load impedance)
– Maximum RMS Voltage Swing THD = 1%, 1 kHz: 55.3 V
– Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8ohm, 1 kHz: +2.2 dBu (1.0 V RMS)
– THD at rated Output Power MBW = 80 kHz, 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz, 7 kHz: < 0.1%
– DIM30 3.15 kHz, 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 25 V/µs
– Signal to Noise Ratio A-weighted: > 106 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 550 W
– Mains Fuse: 240 V / 230 V: T10AH; 120 V / 100 V: T20AH
– Protection: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 12.6 kg (27.8 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 900 2 x 450W Power Amp appeared first on Onthedex.

The Dynacord SL 1200 is a dual 600 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 600 W or less, the SL 1200 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 1200 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification: The SL 1200 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound: The SL 1200 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 600 W power amplifier for powering passive PA speakers
– Three impedance options – 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 900 W at 2 ohms, 600 W at 4 ohm, and 380 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power THD = 1% 1 kHz: 900 W (@ 2 ohm load impedance), 600 W (@ 4 ohm load impedance), 380 W (@ 8 ohm load impedance)
– Rated Output Power THD < 0.1% 20 Hz to 20 kHz: 500 W (@ 4 ohm load impedance), 250 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Dynamic-Headroom IHF-A: 1700 W (@ 2 ohm load impedance), 950 W (@ 4 ohm load impedance), 480 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power Continuous 1 kHz: 1200 W (@ 2 ohm load impedance), 750 W (@ 4 ohm load impedance), 420 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power THD = 1% 1 kHz: 1800 W (@ 4 ohm load impedance), 1200 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing THD = 1% 1 kHz: 65.1 V
– Power Bandwidth THD = 1% ref. 1 kHz half power @ 4 ohm: < 10 Hz to 30 kHz
– Voltage Gain ref. 1 kHz: 32.0 dB
– Input Sensitivity rated power @ 8 ohm 1 kHz: +3.1 dBu (1.11 V RMS)
– THD at rated Output Power MBW = 80 kHz 1 kHz: < 0.03%
– IMD-SMPTE 60 Hz 7 kHz: < 0.1%
– DIM30 3.15 kHz 15 kHz: < 0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk ref. 1 kHz at rated output power: 300
– Slew Rate: 26 V/µs
– Signal to Noise Ratio A-weighted: > 107 dB
– Output Noise A-weighted: < -71 dBu
– Output Stage Topology: Class A/B
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption 1/8 maximum output power @ 4 ohm: 700 W
– Mains Fuse: 240 V / 230 V: T12AH; 120 V / 100 V: T25AH
– Protection: Audio limiters, High temperature, DC, HF Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 14.8 kg (32.6 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 1200 2 x 600W Power Amp appeared first on Onthedex.

The Dynacord SL 1800 is a dual 900 W power amplifier for live sound. Ideal for powering compact passive speakers that operate on 900 W or less, the SL 1800 is a stable and reliable amp for mobile and installation sound alike. The SL range amplifiers offer three different impedances – 2 ohm, 4 ohm, and 8 ohm – for huge flexibility, all with different levels of power output to fit any system. The SL 1800 also boasts comprehensive protection circuitry, including dynamic limiting, to prevent overloading speakers. Dynacord’s Low-Pass Notch filtering improves the frequency response and transient response of any speakers it powers too, resulting in a clearer, punchier sound.

Clean, clear amplification. The SL 1800 is a highly efficient power amp for powering passive PA speakers with great stability to bring the very best possible sound. Portable and compact, but also well-suited to permanent installation in venues, this amplifier can adapt to any venue or sound system you need it to.

Improve your sound. The SL 1800 comes equipped with a wide-ranging set of protection circuitry and dynamic limiting to ensure power sent to speakers remains consistent and clean. Combined with Dynacord’s special Low Pass Notch filtering to improve transient response and tailor the frequency response of the speakers it drives, this amplifier will make your system sound its very best.

Features:
– Dual 900 W power amplifier for powering passive PA speakers
– Three impedance options – 2 ohm, 4 ohm, and 8 ohm modes
– Outputs 1250 W at 2 ohms, 900 W at 4 ohm, and 550 W at 8 ohm
– Efficient and stable power output for clean, clear sound
– Compact and portable rack mount unit suitable for touring or venue installation
– Advanced protection package and dynamic limiters to prevent overload and keep power clean
– Low-Pass Notch filter adjusts frequency response and improves transient response of speakers
– Adjustable power level per channel
– LED metering with limiter warning lights
– Convenient power switch

Specifications:
– Maximum Midband Output Power: THD = 1%, 1 kHz
– Dual Channel: 1250 W (@ 2 ohm load impedance)
– 900 W (@ 4 ohm load impedance)
– 550 W (@ 8 ohm load impedance)
– Rated Output Power: THD < 0.1%, 20 Hz to 20 kHz
– 800 W (@ 4 ohm load impedance)
– 400 W (@ 8 ohm load impedance)
– Maximum Single Channel Output Power:
– Dynamic-Headroom IHF-A:
– 2450 W (@ 2 ohm load impedance)
– 1400 W (@ 4 ohm load impedance)
– 700 W (@ 8 ohm load impedance)
– Continuous 1 kHz:
– 1700 W (@ 2 ohm load impedance)
– 1100 W (@ 4 ohm load impedance)
– 630 W (@ 8 ohm load impedance)
– Maximum Bridged Output Power: THD = 1%, 1 kHz
– 2800 W (@ 4 ohm load impedance)
– 1800 W (@ 8 ohm load impedance)
– Maximum RMS Voltage Swing: THD = 1%, 1 kHz: 78.8 V
– Power Bandwidth: THD = 1%, ref. 1 kHz, half power @ 4 ohm:
– <10 Hz to 30 kHz
– Voltage Gain: ref. 1 kHz: 32.0 dB
– Input Sensitivity: rated power @ 8 ohm, 1 kHz: +5.1 dBu (1.39 V RMS)
– THD at rated Output Power: MBW = 80 kHz, 1 kHz: <0.03%
– IMD-SMPTE 60 Hz, 7 kHz: <0.1%
– DIM30 3.15 kHz, 15 kHz: <0.05%
– Maximum Input Level: +21 dBu (8.69 V RMS)
– Crosstalk, ref. 1 kHz at rated output power: 300
– Slew Rate: 27 V/µs
– Signal to Noise Ratio, A-weighted: >109 dB
– Output Noise, A-weighted: <-71 dBu
– Output Stage Topology: Class H
– Power Requirements: 240 V, 230 V, 120 V, or 100 V; 50 Hz to 60 Hz (factory configured)
– Power Consumption, 1/8 maximum output power @ 4 ohm: 700 W
– Mains Fuse:
– 240 V / 230 V: T15AH
– 120 V / 100 V: T25AH
– Protection: Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay
– Cooling: Front-to-rear 3-stage-fans
– Ambient Temperature Limits: +5°C to +40°C (40°F to 105°F)
– Safety Class: I
– Dimensions (W x H x D): 483 x 88.1 x 421.5 mm
– Weight: 16.3 kg (35.9 lbs)
– Signal Processing: LPN switchable

The post Dynacord SL 1800 2 x 900W Power Amp appeared first on Onthedex.

The Dynacord SH-PS212 Protective Speaker Cover is a premium quality case designed to protect the Dynacord PowerSub 212 dual powered subwoofer. This cover is perfect for those who want their speakers to last long. It is incredibly easy to use and provides efficient protection against water and superficial damage for your speakers.

Featuring integrated carrying handles, the SH-PS212 makes transporting your speaker a breeze. Whether you are on tour or simply need to store your speaker when not in use, this cover is a convenient solution. It is specifically designed to fit your Dynacord PowerSub 212, ensuring a snug and secure fit.

The Dynacord SH-PS212 Protective Speaker Cover is black in color and can be effortlessly incorporated into any setup. If you are in need of a reliable and durable cover for your speakers, look no further than the Dynacord SH-PS212 Protective Speaker Cover. For more information, click on the link provided.

The post Dynacord SH-PS212 Protective Speaker Cover appeared first on Onthedex.

The Dynacord PowerMate 2200-3 is a powerful expanded take on Dynacord’s powered mixers that’s the perfect heart of any live mixing setup.
Featuring two amplifier stages for left and right speakers, ideal for adding the punch you need for passive speakers without investing in a separate power amp. The PowerMate offers 1000 W of power per speaker with low impedance for clear, crisp audio quality that translates your mixes perfectly.

The 2200-3 features 22 channels with high-performance preamps that deliver clean, clear audio with minimal noise. The PowerMate offers 18 mono channels and 4 stereo channels, making signal routing simple and easy. Two effects send controls, two aux sends, and two monitor sends across all channels make further processing extremely easy, making this perfect as a monitoring hub or as a front-of-house desk.

Rounded out by a USB audio interface with four playback channels, four recording channels, and MIDI compatibility, this mixer is incredibly connective and expandable. This powered mixer also provides a staggering range of processing options with a fixed 80 Hz low-cut filter and voice filter on mono channels for cleaning up sounds, and a three-band EQ with a sweepable mid control for further sound sculpting. The desk also features a stereo graphic EQ that can be routed to the master channel or either of its two monitor outputs for extra precision.

To add that final touch of quality to your mixes, the PowerMate also features dual effects units with 100 factory presets, 20 user slots, and adjustable parameters to complete any sources you send to it with reverbs, delays, or modulation.

Clean, clear amplification: Utilizing powerful Class D amplification, the PowerMate can provide up to 1000 watts of power per amplifier. This technology removes the need for heat sinks, improving efficiency so more functionality can be packed into the unit while making it lighter and easier to transport. An ideal solution for traveling engineers, touring bands, festivals, or installation as the heart of a live venue’s audio setup, this mixer is incredibly adaptable.

Extreme connectivity: The 1600-3 offers 18 mono channels with 4 stereo channels, as well as two aux sends, effects sends, and monitor sends per channel. This makes it incredibly simple to use and flexible. Perfect for expanding with other signal processors, input sources, as a sidecar mixer, or purely for monitoring. However, it’s still great for front-of-house mixing too. Plus, a built-in USB audio interface with four playback channels and four recording channels lets you play backing tracks or playlists from computers or tablets, capture live sets in their entirety, or record in studio spaces. MIDI functionality via this USB connection also allows you to run keyboards or synthesizers live.

Deep processing possibilities: The final finishing touches and extra polish to really bring the best out of live sets relies on both internal and external processing options offered by your mixer of choice. The PowerMate shines here too, with two aux sends on each channel allowing connections to outboard gear, as well as its dual built-in effects units. The PowerMate range has become beloved for its reverbs, which are all present on this powered model, as well as delay and modulation effects, letting you add space and depth to any sound source. 100 factory presets and 20 user slots give you plenty of flexibility for saving and loading your own custom effects chains or picking pre-designed ones by Dynacord for quickly achieving great-sounding mixes.

Features:

– 22-channel powered mixer ideal for live sound applications and running passive speakers
– Class D amplification stage delivers 1000 W of clean, efficient power per speaker
– Low 4Ω impedance provides clear, full sound
– 22 high-grade, low-noise preamps capture and reproduce sound accurately
– Six auxiliary buses with two switchable pre or post-fader
– Pre-fader listening switch per channel for easy monitoring
– Two built-in effects processors offer access to delays, reverbs, and modulation
– 100 factory presets and 20 user slots for loading and saving effects
– Phantom power for running condenser microphones
– Two aux sends, monitor sends, and FX sends per channel
– 18 mono channels with three-band EQ with sweepable mid and pan controls
– 4 stereo channels with balance controls and three-band EQ with fixed bands
– Powered desk lamp input for easier control under dim conditions
– RCA connectivity to CD players and 2-track tape machines
– Record send allows you to capture live sets to a range of recording devices
– Built-in USB audio interface with 4 playback tracks for audio input and 4 recording tracks for audio output
– MIDI via USB also available on interface, ideal for running samplers, drum machines, keyboards, or synthesizers live
– Monitor outputs for creating separate monitor mixes for on-stage playback
– Perfect for front-of-house mixing or running a separate monitor station

Specifications and warranty information are also included, but due to the length, they have been omitted from this paragraph.

The post Dynacord PowerMate 2200 22 Channel Powered Mixer appeared first on Onthedex.

The Dynacord PowerMate 600-3 8-Channel Powered Mixer is a revolutionary piece of equipment that offers much more than just mixing capabilities. It features a USB interface, PA effects processor, and graphic EQ all housed in a compact and intuitive design. This mixer is incredibly versatile and can handle any task you throw at it, making your sound larger than life. With two DSP processors, you have access to 100 high-quality presets that will elevate your mixes and performances to the next level.

When it comes to monitoring, the PowerMate 600-3 offers six AUX buses, two of which are switchable from pre to post fader, giving you incredibly flexible monitoring options. Once you’re satisfied with your mix, all you need is a couple of cables to project it through passive speakers and record it into your DAW. With the Dynacord PowerMate 600-3, you can confidently take on anything.

The PowerMate 600-3 takes full advantage of Class-D amplifier technology to deliver high-quality audio. It provides an RMS output of 2 x 1000-watts into 4 ohms and generates minimal heat for a safe and reliable performance. The power supply is monitored by a microprocessor-controlled switching power supply, saving weight and allowing for universal automatic mains switching, so you can use it anywhere in the world.

This mixer features four mic/line level channels, each equipped with professional features for a smooth performance. The XLR microphone inputs offer silent operation with extremely low noise and low distortion, perfect for low-impedance microphones. You can even use condenser microphones thanks to the inclusion of centrally switchable phantom power. These channels are fully adjustable with gain control, switchable 80Hz low-cut filter, and a 3-band EQ for precise sound shaping. Additionally, there are several send options and controls for optimal customization.

The PowerMate 600-3 also serves as a professional audio interface, offering a digital interface with 24-bit resolution and sampling rates up to 96kHz. It provides two stereo channels for input and output use simultaneously. The USB sends include master L and R with AUX and MON signals, allowing for easy connectivity with your PC or Mac. Setting up is simple with the included DVD featuring Cubase LE and USB drivers.

With two independent 24-bit stereo effects processors, the PowerMate 600-3 offers flexible effect processing. Sound engineers can easily mix multiple sounds together with the 100 presets, which include studio-grade reverb, delay, and modulation effects. The delay effect even allows you to match the delay time to the beat of the music using a tap key. Additionally, you can create and store your own effects with 20 user memory slots.

To ensure optimal speaker protection, the PowerMate menu allows you to set matching continuous power output levels to any connected loudspeaker. This prevents thermal overload damage and limits the levels when there is a danger of overloading, all without affecting the dynamic range.

The Dynacord PowerMate 600-3 is a compact powered mixer with a total output power of 2000W. It features a lightweight housing and an intuitively operated mixing section. Other notable features include a large OLED display, a stereo equalizer in the master section, and a Class-D amplifier. The mixer is packed with professional features and is designed to deliver high-quality sound in any application.

Specifications:
– Channels: 4 mono and 4 stereo
– Microphone Inputs: 6 x XLR
– Auxiliaries: 1 pre, 1 post, 1 switchable pre/post
– Power Amp Max Output Voltage: 74V RMS
– Max Single Channel Output Power:
– Dynamic-Headroom IHF-A at 2.66 ohms: 2 x 1600W
– Dynamic-Headroom IHF-A at 4 ohms: 2 x 1250W
– Dynamic-Headroom IHF-A at 8 ohms: 2 x 675W
… (continued with more specifications)

The post Dynacord PowerMate 600-3 8-Channel Powered Mixer appeared first on Onthedex.

The Dynacord PowerMate 1600-3 is a powerful expanded take on Dynacord’s powered mixers that’s the perfect heart of any live mixing setup. Featuring two amplifier stages for left and right speakers, it’s ideal for adding the punch you need for passive speakers without investing in a separate power amp.

The PowerMate offers 1000 W of power per speaker with low impedance for clear, crisp audio quality that translates your mixes perfectly. The 1600-3 features 16 channels with high-performance preamps that deliver clean, clear audio with minimal noise. The PowerMate offers 12 mono channels and 4 stereo channels, making signal routing simple and easy.

Two effects send controls, two aux sends, and two monitor sends across all channels make further processing extremely easy, making this perfect as a monitoring hub or as a front-of-house desk. Rounded out by a USB audio interface with four playback channels, four recording channels, and MIDI compatibility, this mixer is incredibly connective and expandable.

This powered mixer also provides a staggering range of processing options with fixed 80 Hz low-cut filter and voice filter on mono channels for cleaning up sounds, and three-band EQ with a sweepable mid control for further sound sculpting. The desk also features a stereo graphic EQ that can be routed to the master channel or either of its two monitor outputs for extra precision. To add that final touch of quality to your mixes, the PowerMate also features dual effects units with 100 factory presets, 20 user slots, and adjustable parameters to complete any sources you send to it with reverbs, delays, or modulation.

Clean, clear amplification: Utilizing powerful Class D amplification, the PowerMate can provide up to 1000 watts of power per amplifier. This technology removes the need for heat sinks, improving efficiency so more functionality can be packed into the unit while making it lighter and easier to transport. An ideal solution for traveling engineers, touring bands, festivals, or installation as the heart of a live venue’s audio setup, this mixer is incredibly adaptable.

Extreme connectivity: The 1600-3 offers 12 mono channels with 4 stereo channels, as well as two aux sends, effects sends, and monitor sends per channel. This makes it incredibly simple to use and flexible. Perfect for expanding with other signal processors, input sources, as a sidecar mixer, or purely for monitoring. However, it’s still great for front-of-house mixing too. Plus, a built-in USB audio interface with four playback channels and four recording channels lets you play backing tracks or playlists from computers or tablets, capture live sets in their entirety, or record in studio spaces. MIDI functionality via this USB connection also allows you to run keyboards or synthesizers live.

Deep processing possibilities: The final finishing touches and extra polish to really bring the best out of live sets relies on both internal and external processing options offered by your mixer of choice. The PowerMate shines here too, with two aux sends on each channel allowing connections to outboard gear, as well as its dual built-in effects units. The PowerMate range has become beloved for its reverbs, which are all present on this powered model, as well as delay and modulation effects, letting you add space and depth to any sound source. 100 factory presets and 20 user slots give you plenty of flexibility for saving and loading your own custom effects chains or picking pre-designed ones by Dynacord for quickly achieving great-sounding mixes.

Features:
– 16-channel powered mixer ideal for live sound applications and running passive speakers
– Class D amplification stage delivers 1000 W of clean, efficient power per speaker
– Low 4Ω impedance provides clear, full sound
– 16 high-grade, low-noise preamps capture and reproduce sound accurately
– Six auxiliary buses with two switchable pre or post-fader
– Pre-fader listening switch per channel for easy monitoring
– Two built-in effects processors offer access to delays, reverbs, and modulation
– 100 factory presets and 20 user slots for loading and saving effects
– Phantom power for running condenser microphones
– Two aux sends, monitor sends, and FX sends per channel
– 12 mono channels with three-band EQ with sweepable mid and pan controls
– 4 stereo channels with balance controls
– Powered desk lamp input for easier control under dim conditions
– RCA connectivity to CD players and 2-track tape machines
– Record send allows you to capture live sets to a range of recording devices
– Built-in USB audio interface with 4 playback tracks for audio input and 4 recording tracks for audio output
– MIDI via USB also available on interface, ideal for running samplers, drum machines, keyboards, or synthesizers live
– Monitor outputs for creating separate monitor mixes for on-stage playback
– Perfect for front-of-house mixing or running a separate monitor station

Specifications, Warranty, and Shipping information provided.

The post Dynacord PowerMate 1600-3 16 Channel Powered Mixer appeared first on Onthedex.

The Dynacord PowerMate 1000-3 is a revolutionary mixer that goes beyond traditional mixing capabilities. It incorporates a USB interface, PA effects processor, and graphic EQ into a compact and intuitive design. This versatile mixer is suitable for any application and can handle any task you throw at it, making your sound larger than life. With two DSP processors, it offers 100 high-quality presets to take your mixes and performances to the next level.

For monitoring purposes, the PowerMate 1000-3 features six AUX buses, with two switchable from pre to post fader. This results in incredibly flexible monitoring options. Once your mix is perfected, all it takes is a couple of cables to project it through passive speakers and record it into your DAW. With the Dynacord PowerMate 1000-3, you can confidently take on any audio challenge.

The 1000-3 also boasts a high-performance power amplifier that takes full advantage of Class-D technology. It delivers audio quality of the highest grade, providing an RMS output of 2 x 1000 watts into 4&ohm;. Despite its power, it generates only a small amount of heat for a safe and reliable performance. The power supply is monitored by a microprocessor-controlled switching power supply, saving weight and allowing it to be used anywhere in the world.

The PowerMate 1000-3 offers premium features on its six mic/line level channels. Each input includes professional features for a smooth and high-quality performance. The XLR microphone inputs provide near-silent operation with extremely low noise, low hum, and low distortion. They even support condenser microphones with the centrally switchable phantom power. These channels are fully adjustable with gain control, switchable 80Hz low-cut filter, and an intuitive 3-band EQ for excellent sound shaping abilities. Additionally, there are 2 x FX send AUX send MONitor send, and panorama and balance controls. You can also connect a CD or MP3 player via the RCA inputs. Each input channel includes a signal/peak LED for easy monitoring, and there is an efficient mute and PFL button available for use.

The PowerMate 1000-3 also serves as a professional audio interface. It supports sampling rates up to 96kHz in 24-bit resolution, ensuring a professional-level performance. It provides 2 stereo channels for input and output use simultaneously through the USB port on your PC or Mac. Setting up is easy with the included DVD featuring Cubase LE and USB drivers.

With 2 x independent 24-bit stereo effects processors, sound engineers can easily mix multiple sounds together using FX 1 and FX 2. Both sections offer 100 presets, including high-quality reverb, delay, and modulation effects. The delay effect can even be matched to the beat of the music using a tap key. You can also create and save your own effects with 20 user memories available.

The PowerMate menu allows users to set matching continuous power output levels to any connected loudspeaker, ensuring a safe and reliable performance. It also includes dynamic limiting of the maximum output power to prevent thermal overload damage to the loudspeakers without affecting the dynamic range. The protection component constantly monitors the energy supplied to the loudspeakers to limit the levels when there is a risk of overloading.

In terms of specifications, the PowerMate 1000-3 offers 6 mono and 4 stereo channels, 2 pre and 2 post fader auxiliaries, and 2 pre/post switchable auxiliaries. It delivers maximum single channel output power of 2 x 1600W at 2.66&ohm;, 2 x 1250W at 4&ohm;, and 2 x 675W at 8&ohm;. It has a compact and lightweight design, weighing only 14kg, with dimensions of 135mm (height) x 483mm (width) x 443.7mm (depth).

In conclusion, the Dynacord PowerMate 1000-3 is a compact and powerful mixer that offers a wide range of capabilities. It is perfect for both live performances and recording purposes, thanks to its versatile features and high-quality audio performance. Whether you are a sound engineer or a musician, this mixer will exceed your expectations and provide you with a reliable and professional solution for all your audio needs.

The post Dynacord PowerMate 1000-3 10-Channel Powered Mixer appeared first on Onthedex.

The Dynacord PM 502 8-Channel Powered Mixer is a compact mixer that is designed to enhance your workflow and make live sound tasks easier. It features Class-D technology, which ensures that the mixer remains silent when not in use and prevents it from overheating, resulting in a longer lifespan. If you’re looking for a robust and durable system, the PM 502 is the perfect choice.

The PM 502 offers extended connectivity with five XLR/jack combos and three stereo channels. This versatility allows you to capture a wide variety of ensembles, from quiet folk artists to raucous rock bands. Each channel is equipped with a highly musical three-band EQ and a comprehensive set of effects, allowing you to fine-tune your sound and take it to the next level. Additionally, the mixer has a built-in MP3 player, making it easy to play background music between sets.

Included in the box are the PM 502 Mixer, a power cord, a user manual, and safety instructions. The mixer is powered by 2 x 450W RMS at 4&ohm;, and it offers 32 editable HQ effect presets. It also features an integrated MP3 audio player and a 100-volt direct drive option.

The PM 502 has several specifications, including five mono and three stereo channels, five XLR/Jack Socket microphone inputs, and a post and pre FX AUX. It has a rated output power of 640W at 4&ohm; and 350W at 8&ohm;. The dual channel output is 2 x 600W at 4&ohm; and 2 x 340W at 8&ohm;, while the single channel output power is 500W at 4&ohm; and 280W at 8&ohm;.

The PM 502 also offers various input and output features, such as microphone mute switches, attenuation, input sensitivity, and input and output impedance. It has a signal-to-noise ratio of 104 dB and a class-D amplifier topology. The mixer also includes equalization features, such as low shelving, mid peak, and high shelving filters, as well as a 7-band master EQ.

Other features of the PM 502 include a built-in audio player with USB support, a digital audio interface with USB connectivity, and various protection features, such as adjustable peak limiters, audio limiters, and high-temperature cooling. The mixer is also capable of switchable phantom power and has a power consumption of 180W at 1/8 maximum output power.

The PM 502 has a weight of 4.9 kg and dimensions of 244 mm (height), 395 mm (width), and 241 mm (depth). Its product code is PM 502.

The post Dynacord PM 502 8-Channel Powered Mixer appeared first on Onthedex.