The Shure SLXD4UK-K59 wireless receiver is a wireless component designed to receive crystal clear wireless audio. It ensures this using transparent 24-bit digital sound. This is industry leading wireless that will give you professional sound whatever the occasion.
Its super easy to set up too. Just grab your chosen transmitter and use the scan and sync feature on the SLXD4UK. This will pair it with the former so you can worry about more important things than setting up wireless through a fiddly menu.
How do I use it? The SLXD4 wireless receiver is pro-grade equipment anyone can get to grips with. Once plugged in to a source of power you simply need to use the sync feature with a compatible transmitter. This will pair them together with the same wireless frequency. Then simply connect the audio out to an input of your choice; youve now got wireless audio at your fingertips.
Features
– Transparent digital audio with 24-bit quality
– Delivers a wide 20Hz to 20kHz frequency range (depending on microphone)
– Uses digital predictive switching diversity to reduce dropouts
– Set easily with compatible transmitters using scan and IR sync
– Compatible with both Shure Wireless Workbench and ShurePlus Channels apps.
– Built to last with a rugged metal construction
Specifications
– RF Carrier Frequency Range: 606 to 650 MHz
– Working Range: 100m
– RF Tuning Step Size: 25kHz
– Image Rejection: >70dB
– RF Sensitivity: -97 dBm at 10-5 BER
– Audio Latency: 3.2ms
– High-Pass/Low Cut Filter: 150Hz –12dB/octave
– Audio Frequency Response: 20Hz–20kHz (+1 -2dB)
– Audio Dynamic Range: 118dB
– Total Harmonic Distortion: 75dB
– Connector Type: BNC
– Impedance: 50Ω
– Audio Output Gain Adjustment Range:
– Configuration: 1/4″ (6.35 mm): Balanced (Tip=audio + Ring=audio – Sleeve=ground)
– XLR: Balanced (1=ground 2=audio + 3=audio –)
– Impedance:
– 1/4″ (6.35 mm): 1.3kΩ (670Ω unbalanced)
– XLR (Line): 400Ω (200Ω unbalanced)
– XLR(Mic): 150Ω
– Full Scale Output:
– 1/4″ (6.35 mm): +15 dBV differentially (+9 dBV single)
– XLR (Line): +15 dBV
– XLR(Mic): –15 dBV
– Mic/Line Switch: 30dB
– Phantom Power Protection: yes
– Network Interface: Single Port Ethernet 10/100Mbps
– Network Addressing Capability: DHCP or Manual IP address
– Maximum Cable Length: 100m
– Dimensions:
– Height: 42mm
– Width: 197mm
– Depth: 152mm
– Weight: 816g
– Housing: galvanized steel
– Power Requirements: 15 VDC @ 600mA
