The Shure SLXD14/83-K59 Wireless System provides professional and reliable wireless speech for any setting. It features the Shure WL183 lavalier microphone, delivering clear vocals for film, television, theater shows, radio, and conferences. The omnidirectional pickup pattern ensures consistent sound quality in all circumstances, and the interchangeable capsules allow you to choose your preferred polar pattern. simply connect it to the SLXD1 bodypack for professional and dependable vocals in any weather condition. This system offers transparent and reliable sound that you wouldn’t even know it’s wireless.
The SLXD14/83 is built for stable and full transmission, with uncompressed 24-bit audio and the capability to combine up to 32 systems per frequency band. It has easy one-button syncing, making it hassle-free to use. With included rack mounting accessories, you can easily incorporate this system into any audio setup, whether for live amplification or expansive recording as part of a production. Take advantage of Shure’s wireless excellence and achieve professional-grade audio.
For more information, click here.
The WL183 lavalier microphone is designed for adaptable speech reproduction in conferences, professional broadcasting, lectures, houses of worship, and more. It offers a broad dynamic range to handle natural volume changes in speech, minimizing distortion and providing a smooth, accurate sound. The microphone also features interchangeable condenser capsules, allowing it to fit into any acoustic environment or adapt to changes in microphone setup between events. This particular WL183 model includes an omnidirectional cartridge, but you can purchase cardioid and supercardioid cartridges separately.
The SLXD1 bodypack transmitter and SLXD4 receiver provide crystal clear, uncompressed 24-bit audio, ensuring the same clean sound you would achieve with standard wired setups. With the ability to expand up to 32 compatible systems at once, this system allows you to record feature-length movies, TV or radio episodes, or conduct live interviews entirely wirelessly. The WL183 Lavalier Microphone has a frequency response tailored to deliver clear and articulate audio, with high SPL handling that captures dynamic voices without distortion. The microphone comes with a rotatable dual tie-clip that pivots in 90-degree increments and can hold two microphones. It also includes a snap-fit foam windscreen to reduce unwanted breath and plosive noise. The SLXD1 Digital Wireless Bodypack Transmitter provides a clear and uninterrupted signal over a 100-meter range. It has up to 8 hours of continuous use with 2 AA batteries and features an IR sync that pairs the transmitter with the receiver at the push of a button. The transmitter offers exceptionally detailed 24-bit/48kHz digital audio with over 120 dB of dynamic range. It has a backlit LCD screen with an easy-to-navigate menu and controls. The display can show group/channel frequency or battery runtime, and it has a lock mode to prevent accidental changes. The transmitter has a 4-pin male mini connector (TA4M) and a detachable 1/4 wave antenna. The SLXD4 Digital Wireless Receiver allows you to run up to 32 systems in a 44mHz band or 10 systems per 6MHz TV band or 12 systems per 8 MHz band. It enables you to manage multiple system group scans, firmware updates, and control via Ethernet. The receiver features automatic channel scan to quickly find clear frequencies and digital predictive switching to completely eliminate drop-outs. It has a full bandwidth 20Hz-20kHz frequency response and a high-resolution LCD menu with intuitive controls. The receiver also has a lock mode to prevent accidental changes and comes in a half rack format with detachable BNC 1/4 wave antennas. The housing is constructed of tour-proof galvanized steel, and it has XLR and 6.3mm instrument outputs.
The WL183 Lavalier Microphone is equipped with TA4F (TQG) connectors. It is a condenser microphone with an omnidirectional polar pattern. The frequency response is tailored from 50Hz to 17kHz, and the output impedance is 1800Ω. It has a dynamic range of 102.5 dB and a sensitivity of -27.00 dBV/Pa or 42.00 mV/Pa. The microphone weighs 28 g. The SLXD4 Receiver weighs 1.8 lb (816 g) without antennas, and its dimensions are 42 x 197 x 152 mm (H x W x D). It is powered by the included power supply and has a spurious rejection of > 75 dB typical. The connector type is BNC, and the impedance is 50 Ω. The audio output has a gain adjustment range of -18 to +42 dB in 1 dB steps, and it has a balanced configuration with 1/4″ (6.35 mm) and XLR outputs. The impedance is 50 Ω, and the full-scale output is +12 dBV for 1/4″ and +15 dBV for XLR LINE setting, and -15dBV for XLR MIC setting. The receiver also has a 30 dB pad for the mic/line switch and phantom power protection. The networking capability includes a single-port Ethernet 10/100 Mbps network interface with DHCP or manual IP address capability. The maximum cable length is 100 m (328 ft). The SLXD1 Bodypack Transmitter has a mic offset range of 0 to 21 dB in 3 dB steps. It is powered by Shure SB903 rechargeable Li-Ion or AA batteries with a battery runtime of up to 10 hours for Shure SB903 and up to 8 hours for AA batteries. The dimensions are 3.86 x 2.68 x 1.0 in (98 x 68 x 25.5 mm), and the weight is 3.1 oz (89 g) without batteries. The housing is made of PC/ABS. The audio input has a 4-pin male mini connector (TA4M) with an unbalanced configuration and an impedance of 1 MΩ. The maximum input level is 8.2 dBV (7.27 Vpp), and the preamplifier equivalent input noise (EIN) is -118 dBV A-weighted typical. The RF output has an SMA connector and a 1/4 wave antenna with an impedance of 50 Ω. The occupied bandwidth is <200kHz, and the modulation type is Shure proprietary digital. The power output is 1 mW or 10 mW.
CHECK PRICES AT ZZOUNDS
