The Shure SLXD14/153B-H56 is a wireless system including the MX153 earset microphone. A premium yet easy way to go wireless. It comes with the MX153 the SLXD4 wireless receiver and the SLDXD1 wireless bodypack transmitter.
Crystal clear digital audio paired with super stable RF transmission means you can present or perform with confidence. Exactly what you need from a wireless system: top-quality sound that is reliable at all times. With this system youll stop relying on wired connections freeing yourself and others on the stage.
More info…
Whats included
1 x SLXD4 Digital Wireless Receiver
1 x SLXD1 Digital Wireless Bodypack Transmitter
1 x MX153 Earset Headworn Microphone
1 x protective pouch
3 x windscreens
2 x antennae
Rackmount accessories
2 x AA batteries
How do you set it up? You start with the SLX-D wireless receiver securing its antennae and power supply. If you have extra receivers you can connect them via ethernet cable. Then plug an audio cable into the output and your audio system. After this use Guided Frequency Setup to connect your transmitter of choice – this is available through the SLX-D menu. In this case youll use the SLXD4 wireless transmitter which you can attach to your belt. To finish plug your microphone into the transmitter and you are good to go. Its that easy.
Premium audio from premium components The SLXD14UK/153B guarantees transparent digital audio with the headset delivering a wide frequency band from 20Hz to 20kHz. So users will not only be heard more clearly theyll sound amazing too. And you wont get audio dropping out because this system has rock-solid RF stability. Thanks to this you shouldnt be scared to go wireless – its truly time to ditch those spaghetti heaps of cables.
Features
– Crystal clear wireless audio
– MX153 earset ideal for presenters performers and more
– Super stable RF performance allows you to operate with confidence
– Get started with ease using Guided Frequency Setup
– Wide frequency range of 20Hz to 20kHz
– Add additional receivers via ethernet connection
Specifications
SLXD4 Digital Wireless Receiver
RF: RF Carrier Frequency Range: 518 – 554 MHz
Working Range: 100m
RF Tuning Step Size: 25Hz
Image Rejection: >70dB
RF Sensitivity: -97dBm at 10 -5 BER
RF Input:
Spurious Rejection: >75dB
Connector Type: BNC
Impedance: 50 ohms
Audio:
Latency: 3.2ms
High-Pass/Low Cut Filter: 150Hz -12dB/octave
Audio Frequency Response: 20Hz – 20kHz (+1 -2dB)
Audio Dynamic Range: 118dB
Total Harmonic Distortion: <0.02
Mic Offset Range: 0 to 21db (in 3dB steps)
Audio Output:
Gain Adjustment Range:
Configuration: 1/4" – balanced
XLR – balanced
Impedance:
1/4" – 1.3 ohms
XLR (line) – 400 ohms
XLR (mic) – 150 ohms
Full Scale Output:
1/4" – +15 dBV differentially
XLR (line) – +15dBV
XLR (mic) – -15dBV
Mic/Line Switch: 30dB pad
Phantom Power Protection: yes
Temperature Range:
Operating: -18° to 50°
Storage: -29° to 74°
Networking:
Network Interface: single port ethernet 10/100Mbps
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100m
General:
Dimensions: 42 x 97 x 152mm
Weight: 816g
Housing: galvanized steel
Power Requirements: 15VDC @ 600mA
SLXD1 Digital Wireless Bodypack Transmitter
Audio Input:
Connector: 4-pin male mini connector (TA4M)
Configuration: unbalanced
Impedance: 1 Mega Ohm
Maximum Input Level: 8.2dBV
Preamplifier Equivalent Input Noise(EIN): -118dBv
RF Output:
Antenna Type: 1/4 wave
Occupied Bandwidth: <200kHz
Modulation Type: Shure Proprietary Digital
Power: 1mW / 10mW
General:
Battery Type: Rechargeable Li-Ion or 1.5V AA batteries
Dimensions (HxWxD): 98 x 68 x 25.5mm
Weight: 89g
Housing: PC/ABS
MX153 Earset Headworn Microphone
Weight: 19g
Transducer Type: condenser
Polar Pattern: omnidirectional
Frequency Range: 20Hz – 20kHz
Sensitivity dBV/Pa: -41.00
Sensitivity mvpa: 9.00
Equivalent Selfnoise: 34dB(A)
Maximum Sound Pressure: 107dB
Output Connectors: TQG (TA4F 4-Pin Mini)
Requires Phantom Power (VDC): +1-5 V DC
