The Shure SLXD124/85-H56 is a wireless system that includes an iconic mic capsule with the SLXD2/SM58 handheld transmitter. It provides a premium yet easy way to go wireless. This system includes the SLXD2/SM58 handheld transmitter, the SLXD4 wireless receiver, the SLXD1 wireless bodypack transmitter, and the WL185 lavalier microphone. With crystal clear digital audio and super stable RF transmission, you can present or perform with confidence. This wireless system offers top quality sound that is reliable at all times, allowing you to free yourself and others on the stage from relying on wired connections.
For more information, click here.
What’s included:
– 1 x SLXD4 wireless receiver
– 1 x SLXD2/SM58 handheld transmitter
– 1 x SLXD1 wireless bodypack transmitter
– 1 x WL185 lavalier microphone
– 2 x detachable antennae
– 1 x rackmount kit
– 4 x AA batteries
To set up the system, start by securing the antennae and power supply of the SLX-D wireless receiver. If you have extra receivers, you can connect them via ethernet cable. Then, plug an audio cable into the output and your audio system. After this, use the Guided Frequency Setup to connect your transmitter of choice, which is available through the SLX-D menu. You can use either the SLXD1 belt-pack transmitter or the SLXD2/SM58. To finish the setup, plug the lavalier into the bodypack or pick up the SM58 transmitter, and you’re ready to go. It’s that easy.
The SLXD124UK/85-H56 guarantees transparent digital audio, allowing you to perform and present with clarity. Not only will users be heard more clearly, but they’ll also sound amazing. This system offers rock-solid RF stability, eliminating audio dropouts. With this wireless system, you can confidently go wireless without the need for excessive cables.
Shure is well aware of the iconic status of the SM58 live microphone. They’ve taken its capsule and combined it with the SLXD2 handheld transmitter, creating a wireless equivalent that matches the quality of the wired version.
Features:
– Crystal clear wireless audio
– SLXD2/SM58 combines a classic microphone design with wireless capability
– Super stable RF performance for confident operation
– Easy setup with Guided Frequency Setup
– Use the WL185 lavalier in conjunction with the SLXD4 bodypack for handsfree operation
– Additional receivers can be added via ethernet connection
Specifications for SLXD4 Digital Wireless Receiver:
– RF Carrier Frequency Range: 518 – 554 MHz
– Working Range: 100 m (328 ft)
– RF Tuning Step Size: 25Hz
– Image Rejection: >70dB
– RF Sensitivity: -97dBm at 10^-5 BER
– RF Input: Spurious Rejection: >75dB
– Connector Type: BNC
– Impedance: 50 ohms
– Audio Latency: 3.2ms
– High-Pass/Low Cut Filter: 150Hz -12dB/octave
– Audio Frequency Response: 20Hz – 20kHz (+1 -2dB)
– Audio Dynamic Range: 118dB
– Total Harmonic Distortion: <0.02
– Mic Offset Range: 0 to 21dB (in 3dB steps)
– Audio Output: Gain Adjustment Range: Configuration: 1/4" – balanced XLR – balanced
– Impedance: 1/4" – 1.3 ohms XLR (line) – 400 ohms XLR (mic) – 150 ohms
– Full Scale Output: 1/4" – +15 dBV differentially XLR (line) – +15dBV XLR (mic) – -15dBV
– Mic/Line Switch: 30dB pad
– Phantom Power Protection: yes
– Temperature Range: Operating: -18° to 50° Storage: -29° to 74°
– Networking: Network Interface: single port ethernet 10/100Mbps
– Network Addressing Capability: DHCP or Manual IP address
– Maximum Cable Length: 100m
– General: Dimensions: 42 x 97 x 152mm
– Weight: 816g
– Housing: galvanised steel
– Power Requirements: 15VDC @ 600mA
Specifications for SLXD1 Digital Wireless Bodypack Transmitter:
– Audio Input: Connector: 4-pin male mini connector (TA4M)
– Configuration: unbalanced
– Impedance: 1 Mega Ohm
– Maximum Input Level: 8.2dBV
– Preamplifier Equivalent Input Noise(EIN): -118dBv
– RF Output: Antenna Type: 1/4 wave
– Occupied Bandwidth: <200kHz
– Modulation Type: Shure Proprietary Digital
– Power: 1mW / 10mW
– General: Battery Type: Rechargeable Li-Ion or 1.5V AA batteries
– Dimensions (HxWxD): 98 x 68 x 25.5mm
– Weight: 89g
– Housing: PC/ABS
Specifications for SLXD2/SM58 Handheld Transmitter:
– Audio Input: Configuration: unbalanced
– Maximum Input Level: 8.2dBV
– RF Output: Antenna Type: integrated single-band helical
– Occupied Bandwidth: <200kHz
– Modulation Type: Shure Proprietary Digital
– Power: 1mW/10mW
– General: Battery Type: rechargeable Li-Ion or 1.5V AA batteries
– Dimensions (Dia.xL): 37.1 x 176mm
– Weight: 147g
– Housing: Aluminium
– Mic Cartridge: SM58
Specifications for WL185 Cardioid TQG Lavalier Microphone:
– Weight: 28g
– Transducer Type: condenser
– Polar Pattern: cardioid
– Frequency Range: 50Hz – 17kHz
– Sensitivity dBV/Pa: -35.00
– Sensitivity mvpa: 5.95
– Equivalent Selfnoise: 28dB(A)
– Maximum Sound Pressure: 130.5dB
– Output Connectors: TQG (TA4F 4-Pin Mini)
– Requires Phantom Power (VDC): +5 Vdc
– Impedance: 1800 Ohms
