Inspection notes: This Shure GLXD14+/SM35 Digital Wireless Headset System is in full working order and in good condition. Included with this Shure GLXD14+/SM35 Digital Wireless Headset System is its PSU carry case and manuals. This product is secondhand. It has been inspected by our team of product experts to ensure it meets our high-quality standards.
All-new dual-band technology
A new development for this revised system, the GLX-D+ family operates in both 2.4 GHz and 5.8 GHz wireless frequency ranges. Both digital and license-free in most countries worldwide (please refer to included map for exceptions), this new design more than doubles the available bandwidth this system has to find a clean, clear channel for the best sound quality and stability feasible. This system will automatically scan to find a suitable channel when turned on, without you needing to press a button. Not only that, but the system will select backup frequencies to jump to if interference does unexpectedly appear, keeping your show running smoothly, clearly, and without dropouts.
Extended battery life
Shure has taken lengths to redesign the GLX-D+ lithium-ion battery pack to extend its use. Now offering up to 12 hours of continuous use at the 5.8 GHz band and 17 hours in the 2.4 GHz band, this system can last throughout long events.
SM35 included
The SM35 headset features a cardioid polar pattern that reduces feedback and focuses on your voice. Its extended frequency response reaches down to 40 Hz and its capsule can handle high sound pressure levels, ideal for intense energetic performances.
Features
– Dual-band digital wireless system provides exceptional RF performance
– Operates in both 2.4 GHz and 5.8 GHz wireless frequency ranges for broader bandwidth
– Ease of finding clean channels to prevent interference and dropouts
– Automatically selects backup frequencies to switch to in case of sudden interference
– Instantly pairs transmitters and receivers for quick and easy setup
– New and improved rechargeable lithium-ion battery delivers up to 12 hours of battery life
– Quick-charge function gives you 1.5 hours of battery from a 15-minute charge
– Includes bodypack transmitter and SM35 headset microphone
– Removable and adjustable dual antennas on receiver for excellent signal stability
Specifications
GLXD4+ Dual Band Wireless Receivers
– Dimensions (H x W x D): 7.2 x 4.8 x 1.6 in (182.8 x 121.97 x 40.3 mm) antennas folded
– Weight: 10.9 oz. (310 g)
– Housing: Molded plastic
– Power Requirements: 14.5 V – 17 V 600 mA
– Spurious Rejection: >35 dB typical
– Gain Adjustment Range: -20 to 40 dB in 1 dB steps
– Phantom Power Protection: Yes
– Configuration: XLR Output: Impedance balanced, 6.35 mm (1/4″) Output: Impedance balanced
– Impedance: XLR Output: 100Ω, 6.35 mm (1/4″) Output: 100Ω (50Ω Unbalanced)
– Maximum Audio Output Level: XLR Connector: 1 dBV (into 600Ω load), 6.35 mm (1/4″) Connector: +8.5 dBV (into 3kΩ load)
– Pin Assignments: XLR Output: 1=ground, 2=hot, 3=cold, 6.35 mm (1/4″) Output: Tip=audio, Ring/Sleeve=ground
– Receiver Antenna Input Impedance: 50Ω
– Antenna Type: Dual Band 1/2 Wave Sleeve Dipole non-removable
– Maximum Input Level: -20 dBm
GLXD1+ Dual Band Bodypack Transmitter
– Dimensions (H x W x D): 4.5 x 2.6 x 1.1 in (115 x 66.94 x 28.51 mm) without antenna
– Weight: 5.4 oz. (153.1 g) without battery
– Power Requirements: 3.7 V rechargeable lithium ion
– Housing: Cast metal black powdercoat
– Input Impedance: 900 kΩ
– RF Output Power: 10 mW E.I.R.P. max.
– Input Connector: 4-pin male mini connector (TA4M)
– Input Configuration: Unbalanced
– Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)
– Antenna Type: Dual Band Internal Monopole
– Pin Assignments TA4M: 1: Ground (cable shield), 2: +5 V bias, 3: Audio, 4: Tied through active load to ground (On instrument adapter cable pin 4 floats)
SM35 Headset Microphone
– Connector: TA4F (TGQ)
– Transducer Type: Condenser
– Frequency Response: 40 Hz – 20 kHz
– Polar Pattern: Cardioid
– Phantom Power Requirement: Supplied from bodypack
– Output Impedance (@ 1 kHz): 2400 Ω
– Audio Output Level: -59.0 dBV/Pa
– Signal-to-noise Ratio (@ 1 kHz): 55 dB
– Maximum SPL (1000 Ω load, 1 kHz @ 1% THD): 153.0 dB
– Dynamic Range (@ 1 kHz, 1000 Ω load): 114.0 dB
– Equivalent Output Noise (typical A-Weighted): 39 dB
– Cable: 1.1 m
– Weight: 0.072 kg
