The BLX188/SM31 Wireless System is designed to handle intense workouts. The SM31 Fitness Headset is made from corrosion-proof materials, allowing you to sweat and shout into it without compromising its performance. With the BLX88 dual receiver, you can seamlessly use two SM31 headset mics at the same time. The system is built to ensure a rock-solid signal from transmitter to receiver, eliminating interference and drop-outs. Thanks to one-touch Quickscan technology, finding the best frequency for your performance is as easy as pushing a button.
To set up the system, simply plug the mic outputs from the receiver into a channel on your mixing desk. Press the group button on the receiver to perform a Quickscan, which searches your environment to find the clearest frequency. Then, pair the bodypack transmitters to the receiver using the group and channel buttons on the transmitters. The ready LED on the receiver will light up, indicating that you are ready to perform with wireless freedom.
The SM31FH Headset Microphone is specifically made for aerobics and fitness instructors. It has a rugged wire-form design that stays in place even during high-energy workouts. With lightweight components, you can comfortably wear it for hours. The microphone offers clear and high-quality sound, comparable to renowned handheld mics. It is also moisture-resistant, protecting the mic capsule from sweat.
With a Shure BLX188E System, you can enjoy wireless freedom with peace of mind. The receiver’s “ready” LED indicates when the system is set up and secure, preventing signal dropouts. If the channel starts clipping, an LED switches from green to red, prompting you to activate the transmitters’ -10dB gain control. The transmitter also has an LED monitor that alerts you when the batteries are running low. The system is designed for effortless setup straight out of the box.
The BLX188E/SM31-T11 boasts Shure’s legendary durability, undergoing rigorous testing to withstand any environment. It is built to survive the demands of life on the road and is ready for every performance.
Included in the system are the Shure BLX88 Analogue Dual Channel Receiver, two BLX1 Bodypack Transmitters, two SM31FH-TQG Headset Microphones, clothing clips, windshields, a power supply, and four AA batteries.
Specifications:
SM31FH Headset Microphone:
– Connector: TA4F (TGQ)
– Type: Condenser
– Frequency Response: 45Hz – 20kHz
– Polar Pattern: Cardioid
– Output Impedance: 600Ω
– Audio Output Level: -50 dBV/Pa
– Signal-To-Noise Ratio: 66dB
– Maximum SPL: 145.0 dB
– Dynamic Range: 117 dB
– Equivalent Output Noise: 28 dB
– Power Requirements: +5 V DC, 10 V Maximum
– Cable Length: 1.1m
– Net Weight: 60 g
BLX1 Body Pack Transmitter:
– Connector Type: TA4F (TGQ)
– Operating Range: Up to 100 m
– Batteries: AA (included)
– Battery Life: 14 hours
– Battery Status: Multi-Colour LED
– Transmitter Housings: Molded ABS
– Gain Adjustment Range: 26 dB
– Included Antenna: 1/4 Wave
– Input Impedance: 1 MΩ
– Weight: 75 g
– Dimensions: 110 mm x 64 mm x 21 mm
BLX88 Dual Channel Receiver:
– Transmission: Analog
– Power Supply: External
– Receiver Type: Dual
– Number Of Compatible Systems Per Frequency Band: 12
– Receiver Displays: LEDs
– Housings: Molded ABS
– Scan Features: Quick Scan
– Rack Hardware: Optional URT2
– Image Rejection: 50 dB Typical
– RF Sensitivity: -105 dBm For 12dB SINAD Typical
– Weight: 241 g
– Dimensions: 40 mm x 388 mm x 116 mm
