The BLX188/SM31 Wireless System is designed to withstand intense workouts. The SM31 Fitness Headset is made from corrosion-proof materials, allowing you to sweat on it and shout into it without any issues. With the BLX88 dual receiver, you can use two SM31 headset mics simultaneously and enjoy a rock-solid signal from transmitter to receiver. The Shure BLX Wireless Systems eliminate interference and drop-outs, ensuring clear sound quality. The Quickscan technology makes it easy to find the best frequency for your performance with just one press of a button.
Setting up the system is simple. Plug the mic outputs from the receiver into a channel on your mixing desk, just like you would with a wired mic. Perform a Quickscan by pressing the group button on the receiver, which searches for the clearest frequency in your environment. Pair the bodypack transmitters to the receiver using the transmitters’ group and channel buttons. The ready LED on the receiver will light up, indicating that the system is ready to use.
The SM31FH Headset Microphone is specially designed for aerobics and fitness instructors. Its rugged wire-form design ensures durability even during high-energy workouts. The lightweight components make it comfortable to wear for extended periods, and the microphone delivers clear, high-quality sound like Shure’s famous handheld mics. The moisture-resistant fabrics protect the mic capsule from sweat.
With the Shure BLX188 System, you can enjoy wireless freedom without worrying about signal dropouts. The receiver’s “ready” LED indicates that the system is set up and secure, and the channel’s LED switches from green to red if it starts clipping, letting you know when to activate the transmitters’ -10dB gain control. The transmitter also has an LED monitor that shows when the batteries are running low. The system is designed for easy setup straight out of the box.
The BLX188/SM31-S8 is built with legendary Shure durability, making it capable of handling any environment. Shure wireless systems undergo rigorous testing to ensure they can withstand heat, cold, humidity, and the “Shure drop test”. They are built to survive the demands of life on the road, making them ready for every performance.
The system includes a Shure BLX88 Analogue Dual Channel Receiver, two BLX1 Bodypack Transmitters, two SM31FH-TQG Headset Microphones, clothing clips, windshields, a power supply, and AA batteries. The system features the Shure SM31FH-TQG Headset Mic with a comfortable and lightweight wire-frame design, moisture-resistant fabrics, and a clear, detailed sound. The BLX1 Bodypack Transmitter has a 14-hour run time and a 100-meter range, with quick and easy frequency matching. The BLX88 Dual Channel Receiver has a user-friendly and intuitive design, with one-touch QuickScan and compatibility with up to 12 other systems.
The specifications for the SM31FH Headset Microphone include TA4F (TGQ) connector, condenser type, frequency response of 45Hz – 20kHz, cardioid polar pattern, output impedance of 600 ohms, audio output level of -50 dBV/Pa, signal-to-noise ratio of 66dB, maximum SPL of 145.0 dB, dynamic range of 117 dB, equivalent output noise of 28 dB, power requirements of +5 V DC 10 V, maximum cable length of 1.1m, and net weight of 60g.
The BLX1 Bodypack Transmitter features a TA4F (TGQ) connector, operating range of up to 100m, AA batteries with a 14-hour battery life, multi-color LED for battery status, molded ABS housing, gain adjustment range of 26 dB, 1/4 wave antenna, input impedance of 1 M ohm, weight of 75g, and dimensions of 110mm x 64mm x 21mm.
The BLX88 Dual Channel Receiver is an analog transmission system with an external power supply. It is a dual-channel receiver with LEDs for receiver display, molded ABS housing, quick scan feature, optional rack hardware, image rejection of 50 dB Typical, RF sensitivity of -105 dBm for 12dB SINAD Typical, weight of 241g, and dimensions of 40mm x 388mm x 116mm.
CHECK PRICES AT ZZOUNDS
