The Shure BLX188UK/W85-K3E combines discrete and professional lavaliers with intuitive wireless technology. Offering consistently clear accurate sound. No matter where you move. And with the BLX88 dual receiver you can seamlessly run both W85 lavalier mics at the same time.
Shure BLX Wireless Systems eliminate interference and drop-outs. Providing rock solid signal from bodypack to receiver – youll sound like youre using a wired mic. And thanks to one-touch Quickscan technology all the hard work is done for you. Locating the best frequency for your performance is as easy as pushing a button. No trial and error. No complicated set up. Just one press.
So how do I get set up? Its simple. Plug the mic outputs (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic. Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance. Finally pair the bodypack transmitters to the receiver by using the transmitters group and channel buttons. The ready LED on the receiver will light up. And its as easy as that! You can now perform with wireless freedom.
WL185 Lavalier Microphone As a premium cardioid microphone the flexible WL185 features accurate sound reproduction and interchangeable cartridges. The ability to switch out cartridges allows users to choose between cardioid supercardioid and omnidirectional condenser cartridges (all sold separately). The rotatable tie clip pivots 90° for accurate microphone positioning whilst the supplied dual tie clip holds two microphones for dual miking applications. The WL185 lavalier microphone is ideal for speech based performances such as presentations lectures or within houses of worship.
Comprehensive monitoring With a Shure BLX88UK System you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED will tell you when your system is set up and secure. You don’t need to worry about signal dropouts. If the channel starts clipping an LED switches from green to red letting you know if you should activate the transmitters -10dB gain control. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything is clear and simple for effortless setup straight out the box.
Legendary Shure durability Boasting the tour-tough construction Shure are revered for. The BLX188UK/W85-K3E has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat cold humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. Theyre ready for every performance.
Included Within The System
1 x Shure BLX88 Analogue Dual Channel Receiver
2 x BLX1 Bodypack Transmitter
2 x WL185 Lavalier Condenser Microphone
1 x Swivel Adapter
2 x Tie Clip
4 x Windscreen
4 x AA Batteries
Features
WL185 Lavalier Condenser Microphone
Miniature clip-on lavalier microphone
Can be worn with minimal visibility
Reproduces your vocals with outstanding clarity
Tailored frequency response for speaking and presentations
Cardioid polar pattern rejects unwanted noise
Permanently charged electret condenser element
TA4F (TQG) connector for use with any Shure wireless bodypack
Legendary Shure engineering for maximum durability and performance
Included windscreens reduce plosives wind and breath noise
Also includes a tie clip to allow for handsfree use
BLX1 Body Pack Transmitter
14-hour run time and a 100 meter range from one pair of AA batteries
Quick and easy frequency matching
Continuously adjustable gain dial
Easily accessible on/off switch
Power & battery status LED
Clip-on design easily attaches to performer
Lightweight comfortable and discrete build
Rugged and robust – built for rigorous live performances
TA4F (TQG) connection for use with Shure headset lavalier instrument mics and guitar cables
BLX88 Dual Channel Receiver
User friendly and intuitive design – no complicated setup options
One touch QuickScan finds the best open frequency for uninterrupted signal
Internal microprocessor-controlled antenna keeps the unit discrete and compact
Two colour LED for monitoring signal level
Compatible with up to 12 other systems
XLR & 1/4″ audio outputs
Specifications
BLX188UK/CVL System
Set Type: Presenter
Amount Of Bodypacks: 2
Amount Of TQG Mics: 2
Number Of Compatible Systems Per Frequency Band: 12
WL185 Lavalier Microphone
Transducer Type: Condenser
Form Factor: Lavalier
Connectors: TQG
Polar Pattern: Cardioid
Frequency Response: Tailored 50Hz – 17kHz
Output Impedance: 1800Ω
Sensitivity: -35.00 dBV/Pa – 17.00 mV/Pa
Equivalent Selfnoise: 28 dB(A)
Sound Pressure: 130.5 dB SPL
Dynamic Range: 102.5 dB
Weight: 28g
BLX1 Body Pack Transmitter
Connector Type: TA4F (TGQ)
Operating Range (Up To): 100 m
Batteries: AA (included)
Battery Life: 14 hour
Battery Status: Multi-Colour LED
Transmitter Housings: Molded ABS
Gain Adjustment Range: 26 dB
Included Antenna: 1/4 Wave
Input Impedance: 1 MΩ
Weight: 75 g
Dimensions (H x W x D): 110 mm x 64 mm x 21 mm
BLX88 Dual Channel Receiver
Transmission: Analog
Power Supply: External
Receiver Type: Dual
Number Of Compatible Systems Per Frequency Band: 12
Receiver Displays: LEDs
Housings: Molded ABS
Scan Features: Quick Scan
Rack Hardware: Optional URT2
Image Rejection: 50 dB Typical
RF Sensitivity: -105 dBm For 12dB SINAD Typical
Weight: 241 g
Dimensions (H x W x D): 40mm x 388mm x 116mm
