The BLX188/SM31 Wireless System is designed to handle intense workouts. The SM31 Fitness Headset is made from corrosion-proof materials that can withstand sweat and shouting. With the BLX88 dual receiver, you can use two SM31 headset mics simultaneously.
Shure BLX Wireless Systems are built to provide a rock-solid signal with no interference or drop-outs. The one-touch Quickscan technology makes it easy to find the best frequency for your performance. All you have to do is press a button.
Setting up the system is simple. Just plug the mic outputs into a channel on your mixing desk, perform a Quickscan by pressing the group button on the receiver, and pair the bodypack transmitters to the receiver using the group and channel buttons on the transmitters. The ready LED on the receiver will light up, indicating that you’re ready to perform wirelessly.
The SM31FH Headset Microphone is specially designed for aerobics and fitness instructors. Its rugged wire-form design ensures it stays in place during high-energy workouts. It is lightweight and comfortable to wear for long periods and offers exceptional sound quality. The mic capsule is also moisture-resistant, protecting it from sweat.
With a Shure BLX188 System, you can perform with wireless freedom and peace of mind. The receiver’s LED indicators show when the system is set up and secure. You don’t have to worry about signal dropouts, and if the channel begins clipping, an LED switches from green to red, indicating that you should activate the transmitters’ -10dB gain control. There is also an LED monitor that alerts you when the transmitter batteries are running low.
The BLX188/SM31-H8E is built to withstand any environment with its tour-tough construction. It has been rigorously tested to ensure durability and reliability. Shure wireless systems are designed to survive the demands of life on the road and are ready for every performance.
The BLX188/SM31-H8E system includes the Shure BLX88 Analogue Dual Channel Receiver, two BLX1 Bodypack Transmitters, two SM31FH-TQG Headset Microphones, clothing clips, windshields, a power supply, and four AA batteries.
The SM31FH-TQG Headset Mic features a comfortable and lightweight wire frame design, moisture-resistant fabrics, a secure fit, clear sound quality, a cardioid polar pattern, a flexible gooseneck, a windscreen, a clothing clip, and a permanently-charged condenser capsule with a TA4F (TQG) connector.
The BLX1 Bodypack Transmitter has a 14-hour run time, a 100-meter range, quick and easy frequency matching, an adjustable gain dial, an on/off switch, a power and battery status LED, a clip-on design, lightweight and comfortable build, and a rugged construction. It also features a TA4F (TQG) connection for use with Shure headset, lavalier, instrument mics, and guitar cables.
The BLX88 Dual Channel Receiver has a user-friendly design with one-touch QuickScan, an internal microprocessor-controlled antenna, a two-color LED for signal monitoring, compatibility with up to 12 other systems, and XLR & 1/4″ audio outputs.
Specifications of the SM31FH Headset Microphone include a TA4F (TGQ) connector, a condenser type, a frequency response of 45Hz – 20kHz, a cardioid polar pattern, an output impedance of 600Ω, an audio output level of -50 dBV/Pa, a signal-to-noise ratio of 66dB, a maximum SPL of 145.0 dB, a dynamic range of 117 dB, an equivalent output noise of 28 dB, power requirements of +5 V DC – 10 V, a maximum cable length of 1.1m, and a net weight of 60g.
Specifications of the BLX1 Body Pack Transmitter include a TA4F (TGQ) connector, an operating range of up to 100m, AA battery power, a 14-hour battery life, a battery status multi-color LED, molded ABS transmitter housings, a gain adjustment range of 26 dB, a 1/4 wave antenna, an input impedance of 1 MΩ, a weight of 75g, and dimensions of 110mm x 64mm x 21mm (H x W x D).
Specifications of the BLX88 Dual Channel Receiver include analog transmission, an external power supply, compatibility with up to 12 other systems, LEDs for receiver displays, molded ABS housings, Quickscan scan features, optional URT2 rack hardware, an image rejection of 50 dB typical, an RF sensitivity of -105 dBm for 12dB SINAD typical, a weight of 241g, and dimensions of 40mm x 388mm x 116mm (H x W x D).
CHECK PRICES AT ZZOUNDS
