The BLX188/SM31 Wireless System can handle your most intense workouts. The SM31 Fitness Headset is made from corrosion proof materials. You can sweat on it shout into it and it will perform just as you need it. Combined with the BLX88 dual receiver you can seamlessly run both SM31 headset mics at the same time. Built to ensure rock solid signal from transmitter to receiver. Shure BLX Wireless Systems eliminate interference and drop-outs. Youll sound completely clear. And thanks to one-touch Quickscan technology all the hard work is done for you. Locating the best frequency for your performance is as easy as pushing a button. No trial and error. No complicated set up. Just one press.
So how do I get set up? Its simple. Plug the mic outputs (found on the back of the receiver) into a channel on your mixing desk. Just like a normal wired mic. Press the group button on the receiver to perform a Quickscan. This searches your environment to locate the clearest frequency for your performance. Finally pair the bodypack transmitters to the receiver by using the transmitters group and channel buttons. The ready LED on the receiver will light up. And its as easy as that! You can now perform with wireless freedom.
SM31FH Headset Microphone The SM31 Fitness Headset has been specially made for aerobics and fitness instructors. Its rugged wire-form design is built to last and will stay in place even during high energy workouts. And because its been assembled with lightweight components you can comfortably wear it for hours. It sounds exceptionally clear too offering the same quality as Shure’s famous handheld mics. And thanks to moisture resistant fabrics the mic capsule is completely safe from sweat. Comprehensive monitoring With a Shure BLX188 System you get wireless freedom with total peace of mind. The receiver’s ‘ready’ LED will tell you when your system is set up and secure. You don’t need to worry about signal dropouts. If the channel starts clipping an LED switches from green to red letting you know if you should activate the transmitters -10dB gain control. There is even an LED monitor to tell you when the batteries are running low on the transmitter. Everything is clear and simple for effortless setup straight out the box.
Legendary Shure durability Boasting the tour-tough construction Shure are revered for. The BLX188/SM31-H8E has been rigorously tested to make sure it can handle any environment. All Shure wireless systems are subject to heat cold humidity and the ‘Shure drop test’. They are built to survive the demands of life on the road. Theyre ready for every performance.
Included Within The System
1 x Shure BLX88 Analogue Dual Channel Receiver
2 x BLX1 Bodypack Transmitter
2 x SM31FH-TQG Headset Microphone
2 x Clothing Clip
4 x Windshields
1 x Power Supply
4 x AA battery
Features
Shure SM31FH-TQG Headset Mic
Comfortable and lightweight wire frame design
Moisture resistant fabrics protect mic from sweat
Super secure fit even during high energy workouts
Clear detailed sound similar to quality handheld mics
Cardioid polar pattern focuses only on your voice
Flexible gooseneck for quick easy adjustments
Windscreen tames wind and breath noise
Clothing clip keeps cable tucked away
Permanently-charged condenser capsule (phantom power not required)
TA4F (TQG) connector compatible with any Shure bodypack
BLX1 Body Pack Transmitter
14-hour run time and a 100 meter range from one pair of AA batteries
Quick and easy frequency matching
Continuously adjustable gain dial
Easily accessible on/off switch
Power & battery status LED
Clip-on design easily attaches to performer
Lightweight comfortable and discrete build
Rugged and robust – built for rigorous live performances
TA4F (TQG) connection for use with Shure headset lavalier instrument mics and guitar cables
BLX88 Dual Channel Receiver
User friendly and intuitive design – no complicated setup options
One touch QuickScan finds the best open frequency for uninterrupted signal
Internal microprocessor-controlled antenna keeps the unit discrete and compact
Two colour LED for monitoring signal level
Compatible with up to 12 other systems
XLR & 1/4″ audio outputs
Specifications
SM31FH Headset Microphone
Connector: TA4F (TGQ)
Type: Condenser
Frequency Response: 45Hz – 20kHz
Polar Pattern: Cardioid
Output Impedance: 600Ω
Audio Output Level: -50 dBV/Pa
Signal-To-Noise Ratio: 66dB
Maximum SPL: 145.0 dB
Dynamic Range: 117 dB
Equivalent Output Noise: 28 dB
Power Requirements: +5 V DC 10 V Maximum
Cable Length: 1.1m
Net Weight: 60 g
BLX1 Body Pack Transmitter
Connector Type: TA4F (TGQ)
Operating Range (Up To): 100 m
Batteries: AA (included)
Battery Life: 14 hour
Battery Status: Multi-Colour LED
Transmitter Housings: Molded ABS
Gain Adjustment Range: 26 dB
Included Antenna: 1/4 Wave
Input Impedance: 1 MΩ
Weight: 75 g
Dimensions (H x W x D): 110 mm x 64 mm x 21 mm
BLX88 Dual Channel Receiver
Transmission: Analog
Power Supply: External
Receiver Type: Dual
Number Of Compatible Systems Per Frequency Band: 12
Receiver Displays: LEDs
Housings: Molded ABS
Scan Features: Quick Scan
Rack Hardware: Optional URT2
Image Rejection: 50 dB Typical
RF Sensitivity: -105 dBm For 12dB SINAD
Weight: 241 g
Dimensions (H x W x D): 40mm x 388mm x 116mm
