The Shure BLX14/SM35 Wireless System is designed to provide a reliable and high-quality performance without the restrictions of wires. It ensures a strong and stable signal from the bodypack to the receiver, eliminating drop-outs and interference. Setting up the system is simple with the one-touch Quickscan technology that finds the best open frequency for your performance, resulting in uninterrupted crystal clear sound. The SM35 headset included in the system delivers phenomenal sound with its quality condenser capsule and tight pickup pattern that only captures your voice, eliminating feedback issues. Whether you’re performing in small clubs or large stadiums, the Shure BLXUK14/SM35 Wireless System allows you to explore your performance with freedom.
To set up the system, simply plug the mic output from the receiver into a channel on your mixing desk, just like you would with a normal wired mic. Press the group button on the receiver to perform a Quickscan, which searches your environment to find the clearest frequency. Plug the SM35 headset into the transmitter’s TGQ connection and use the group and channel buttons to pair the transmitter with the receiver. The ready LED on the receiver will indicate when the system is set up. Adjust the transmitter gain dial to suit your voice, and you’re ready to perform wirelessly. The SM35 headset microphone is lightweight and comfortable, featuring a slim wire frame design that stays secure even during high-energy performances. Its tight cardioid polar pattern focuses only on your voice and reduces unwanted feedback from stage monitors. The headset comes with a clothing clip to keep the cable out of the way, and the flexible gooseneck design allows for quick and precise adjustments.
With the Shure BLX System, you can perform with wireless freedom and peace of mind. The receiver’s “ready” LED indicates when the system is set up and secure, and you don’t have to worry about signal dropouts. If the channel starts clipping, an LED switches from green to red to let you know to adjust the transmitter’s gain. The system also has an LED monitor to notify you when the transmitter’s batteries are running low. The BLX Wireless System is designed for durability, passing Shure’s extreme testing and able to handle any environment. The construction is tour-tough, ready to withstand the demands of life on the road.
The package includes the SM35 headset microphone, BLX1 body pack transmitter, Shure BLX4 analogue single channel receiver, clothing clip, two windshields, power supply, and two AA batteries. The SM35 headset microphone delivers clear and detailed sound similar to quality handheld mics, with a comfortable and secure fit. The BLX1 body pack transmitter has a 14-hour run time and a 100-meter range, with quick and easy frequency matching and adjustable gain dial. The BLX4 single channel receiver has a user-friendly and intuitive design, with one touch QuickScan to find the best open frequency and dual color LED for monitoring signal level. It is compatible with up to 12 other systems and has XLR and 1/4″ audio outputs.
Specifications:
– SM35 Headset Microphone: TA4F (TGQ) connector, condenser type, frequency response of 40Hz – 20kHz, cardioid polar pattern, phantom power requirement supplied from bodypack, output impedance of 600 ohms, audio output level of -50 dBV/Pa, signal-to-noise ratio of 66dB, maximum SPL of 145.0 dB, dynamic range of 117 dB, equivalent output noise of 28 dB, cable length of 1.1m, and net weight of 72g.
– BLX1 Body Pack Transmitter: TA4F (TGQ) connector type, operating range of up to 100m, AA batteries included with a 14-hour battery life, multi-color LED for battery status, molded ABS transmitter housing, gain adjustment range of 26 dB, 1/4 wave antenna, input impedance of 1 M ohm, weight of 75g, and dimensions of 110mm x 64mm x 21mm.
– BLX4 Single Channel Receiver: analog transmission, external power supply, single receiver with LED displays, molded ABS housing, QuickScan scan features, optional URT2 rack hardware, image rejection of 50 dB typical, RF sensitivity of -105 dBm for 12dB SINAD typical, weight of 241g, and dimensions of 40mm x 188mm x 103mm.
