The Shure BLX1288/PGA31 Wireless System includes a combination of the PG58 handheld transmitter and PGA31 headset. The system delivers a simple setup and standard Shure quality performance. The PGA31 offers users unlimited freedom of movement during performances whilst the handheld PG58 is a microphone with outstanding sound quality. Included within the system is the PGA31 BLX88 BLX1 and BLX2/PG58.
More info…
PGA31 Condenser Headset
The Shure PGA31 Headset is a cardioid condenser microphone designed for speech and vocal performances. The PGA31 provides users with an affordable headset that offers excellent comfort allowing for wear over long periods of time. A cardioid pick-up pattern delivers outstanding off-axis rejection with high-gain before feedback. The Shure headset ensures a secure fit for situations where hands-free operation is required.
Powerful PG58 Vocal Performance
The Shure BLX2/PG58 transmitter contains a tailored frequency response that provides a clean smooth sound designed specifically for vocal performances. The cardioid polar pick-up pattern is less susceptible to feedback interference and picks up sound from both the front and sides. In addition to the feedback protection, the PG58 features a pop filter to deter abrupt breathing sounds and wind noise. The dynamic cartridge within the PG58 features a neodymium magnet for high output levels and allows you to handle extreme volume levels without experiencing distortion.
BLX88 Receiver
The BLX88 receiver is compatible with up to 12 systems and is simple to setup. The receiver features internal antenna, a one touch QuickScan that locates the best open frequency, and two colour audio status indicator LED display.
BLX1 Bodypack Transmitter
The transmitter included within this Shure wireless system is both lightweight and durable. The compact transmitter fits comfortably in hand and features adjustable gain control, quick and easy frequency matching, and a power/battery status LED. The BLX1 can run up to 14 hours of continuous use with AA batteries (included with the system) and has an operating range of up to 100 metres.
Included With The System
1 x PGA31 Headset Microphone
1 x BLX88 Wireless Receiver
1 x BLX1 Bodypack Transmitter
1 x BLX2/PG58 Dynamic Vocal Microphone
2 x Swivel Adapters
1 x Power Supply
1 x Thread Adapter
Features
BLX1288/PGA31 Wireless System
Bodypack & handheld transmitters
Operating range up to 100m
BLX2/PG58 Handheld Transmitter
Power and battery status LED
Adjustable gain control
Quick and easy frequency matching
AA batteries (included) provide up to 14 hours of continuous use
100 m (300 ft) operating range (line of sight)
Integrated microphone capsule design
-10 dB gain attenuation
Lightweight rugged construction
PGA31 Headset Microphone
Wireframe headset fits securely for speakers and performers
Permanently charged electret condenser cartridge
Cardioid pick-up polar pattern
Flexible goose-neck design with discrete adjustment capabilities
TA4F connector seamlessly integrates with Shure wireless bodypacks
Included windscreen delivers clean sound free of outside interference
Tailored frequency response for vocals
BLX88 Receiver
Up to 12 compatible systems
Internal antenna
One touch QuickScan
XLR & 1/4″ audio outputs
Two colour audio status indicator LED
BLX1 Wireless Bodypack Transmitter
Power & battery status LED
Adjustable gain control
Quick & easy frequency matching
Included AA batteries that provide up to 14 hours of continuous use
Operating range of up to 100 metres
Specifications
BLX1288/PGA31 System
Set Type: Headset/Handheld Combo
Amount Of Bodypacks: 1
Amount Of Handhelds: 1
Amount Of TQG Mics: 1
Number Of Compatible Systems Per Frequency Band: 12
BLX2/PG58 Wireless Transmitter
Form Factor: Handheld
Operating Range (Up To): 100 m (Under Typical Conditions)
Transmitter Housings: Molded ABS
Audio Mute: No
Detachable Antennas: No
Switchable RF Power: No
Batteries: AA
Battery Status: Multi-Colour LED
Frequency Diversity: No
Functionality: Transmitter
High Density Mode: No
Weight: 340 g
Transmitter Weight: 218 g
Dimensions: Height: 224 mm, Width: 53 mm, Depth: 53 mm
PGA31 Headset Microphone
Transducer Type: Condenser
Polar Pattern: Cardioid
Frequency Response: Tailored 60Hz – 20kHz
Sensitivity: -50 dBV/Pa – 3.20 mV/Pa
Equivalent Selfnoise: 28 dB(A)
Sound Pressure Levels: 145 dB
Switchable Low Cut: No
Connectors: TA4F
Attenuator: No
Interchangeable Capsule: No
Main Functionality: Performance
Headphone Output: No
Requires Phantom Power: 5V DC (Nominal) 10 V Maximum (DC Bias) VDC
Cartridge: Fixed
Cable: 1.3 m
Weight: 60 g
BLX88 Receiver
Transmission: Analog
Type Of Power Supply: External
Receiver Housings: Molded ABs
Active Antenna Possible: No
Bias via BNC: No
High Density Mode: No
Interference Detection: No
Remote Control: No
Number Of Compatible Systems Per Frequency Band: 12
DANTE Audio Network Interface: No
Scan Features: Quick Scan
Detachable Antennas: No
Logic: No
Cascade: No
Rack Hardware: Optional URT2
Receiver Displays: LEDs
Receiver Type: Dual Line Mic
Switch: No
Image Rejection: 50 dB Typical
RF Sensitivity: -105 dBm For 12dB SINAD Typical
Phantom Power Protection: No
Weight: 429 g
Dimensions: Height: 40 mm, Width: 388 mm, Depth: 116 mm
BLX1 Wireless Bodypack Transmitter
Form Factor: Bodypack
Operating Range (Up To): 100 m
Battery Life Alkaline: 14 h
Transmitter Housings: Molded ABS
Audio Mute: No
Detachable Antenna: No
Switchable RF Power: No
Batteries: AA
Battery Status: Multi-Colour LED
Connectors: TQG
Frequency Diversity: No
Functionality: Transmitter
Gain Adjustment Range: 26 dB
High Density Mode: No
Included Antenna: 1/4 Wave
Input Impedance: 1 MΩ
Weight: 75 g
Dimensions: Height: 110 mm, Width: 64 mm, Depth: 21 mm
