The Shure BLX1288/PGA31 Wireless System includes a combination of the PG58 handheld transmitter and PGA31 headset. The system delivers a simple setup and standard Shure quality performance. The PGA31 offers users unlimited freedom of movement during performances whilst the handheld PG58 is a microphone with outstanding sound quality. Included within the system is the PGA31 BLX88 BLX1 and BLX2/PG58.
PGA31 Condenser Headset The Shure PGA31 Headset is a cardioid condenser microphone designed for speech and vocal performances. The PGA31 provides users with an affordable headset that offers excellent comfort allowing for wear over long periods of time. A cardioid pick-up pattern delivers outstanding off-axis rejection with high-gain before feedback. The Shure headset ensures a secure fit for situations where hands-free operation is required.
Powerful PG58 Vocal Performance The Shure BLX2/PG58 transmitter contains a tailored frequency response that provides a clean smooth sound designed specifically for vocal performances. The cardioid polar pick-up pattern is less susceptible to feedback interference and picks up sound from both the front and sides. In addition to the feedback protection, the PG58 features a pop filter to deter abrupt breathing sounds and wind noise. The dynamic cartridge within the PG58 features a neodymium magnet for high output levels and allows you to handle extreme volume levels without experiencing distortion.
BLX88 Receiver The BLX88 receiver is compatible with up to 12 systems and is simple to set up. The receiver features internal antenna, a one-touch QuickScan that locates the best open frequency, and a two-color audio status indicator LED display.
BLX1 Bodypack Transmitter The transmitter included within this Shure wireless system is both lightweight and durable. The compact transmitter fits comfortably in hand and features adjustable gain control, quick and easy frequency matching, and a power/battery status LED. The BLX1 can run up to 14 hours of continuous use with AA batteries (included with the system) and has an operating range of up to 100 meters.
Included With The System
– 1 x PGA31 Headset Microphone
– 1 x BLX88 Wireless Receiver
– 1 x BLX1 Bodypack Transmitter
– 1 x BLX2/PG58 Dynamic Vocal Microphone
– 2 x Swivel Adapters
– 1 x Power Supply
– 1 x Thread Adapter
Features
– BLX1288/PGA31 Wireless System
– Bodypack & handheld transmitters
– Operating range up to 100m
– BLX2/PG58 Handheld Transmitter
– Power and battery status LED
– Adjustable gain control
– Quick and easy frequency matching
– AA batteries (included) provide up to 14 hours of continuous use
– 100 m (300 ft) operating range (line of sight)
– Integrated microphone capsule design
– -10 dB gain attenuation
– Lightweight rugged construction
– PGA31 Headset Microphone
– Wireframe headset fits securely for speakers and performers
– Permanently charged electret condenser cartridge
– Cardioid pick-up polar pattern
– Flexible goose-neck design with discrete adjustment capabilities
– TA4F connector seamlessly integrates with Shure wireless bodypacks
– Included windscreen delivers clean sound free of outside interference
– Tailored frequency response for vocals
– BLX88 Receiver
– Up to 12 compatible systems
– Internal antenna
– One-touch QuickScan
– XLR & 1/4″ audio outputs
– Two-color audio status indicator LED
– BLX1 Wireless Bodypack Transmitter
– Power & battery status LED
– Adjustable gain control
– Quick & easy frequency matching
– Included AA batteries that provide up to 14 hours of continuous use
– Operating range of up to 100 meters
Specifications
– BLX1288/PGA31 System Set
– Type: Headset/Handheld Combo
– Amount Of Bodypacks: 1
– Amount Of Handhelds: 1
– Amount Of TQG Mics: 1
– Number Of Compatible Systems Per Frequency Band: 12
– BLX2/PG58 Wireless Transmitter
– Form Factor: Handheld
– Operating Range (Up To): 100 m (Under Typical Conditions)
– Transmitter Housings: Molded ABS
– Audio Mute: No
– Detachable Antennas: No
– Switchable RF Power: No
– Batteries: AA
– Battery Status: Multi-Colour LED
– Frequency Diversity: No
– Functionality: Transmitter
– High Density Mode: No
– Weight: 340 g
– Transmitter Weight: 218 g
– Dimensions: Height: 224 mm Width: 53 mm Depth: 53 mm
– PGA31 Headset Microphone
– Transducer Type: Condenser
– Polar Pattern: Cardioid
– Frequency Response: Tailored 60Hz – 20kHz
– Sensitivity: -50 dBV/Pa – 3.20 mV/Pa
– Equivalent Selfnoise: 28 dB(A)
– Sound Pressure Levels: 145 dB
– Switchable Low Cut: No
– Connectors: TA4F
– Attenuator: No
– Interchangeable Capsule: No
– Main Functionality: Performance
– Headphone Output: No
– Requires Phantom Power: 5V DC (Nominal) 10 V Maximum (DC Bias) VDC
– Cartridge: Fixed
– Cable: 1.3 m
– Weight: 60 g
– BLX88 Receiver
– Transmission: Analog
– Type Of Power Supply: External
– Receiver Housings: Molded ABs
– Active Antenna Possible: No
– Bias via BNC: No
– High Density Mode: No
– Interference Detection: No
– Remote Control: No
– Number Of Compatible Systems Per Frequency Band: 12
– DANTE Audio Network Interface: No
– Scan Features: Quick Scan
– Detachable Antennas: No
– Logic: No
– Cascade: No
– Rack Hardware: Optional URT2
– Receiver Displays: LEDs
– Receiver Type: Dual Line
– Mic Switch: No
– Image Rejection: 50 dB Typical
– RF Sensitivity: -105 dBm For 12dB SINAD Typical
– Phantom Power Protection: No
– Weight: 429 g
– Dimensions Height: 40 mm Width: 388 mm Depth: 116 mm
– BLX1 Wireless Bodypack Transmitter
– Form Factor: Bodypack
– Operating Range (Up To): 100 m
– Battery Life Alkaline: 14 h
– Transmitter Housings: Molded ABS
– Audio Mute: No
– Detachable Antenna: No
– Switchable RF Power: No
– Batteries: AA
– Battery Status: Multi-Colour LED
– Connectors: TQG
– Frequency Diversity: No
– Functionality: Transmitter
– Gain Adjustment Range: 26 dB
– High Density Mode: No
– Included Antenna: 1/4 Wave
– Input Impedance: 1 MΩ
– Weight: 75 g
– Dimensions: Height: 110 mm Width: 64 mm Depth: 21 mm
