The Sennheiser SR IEM G4 Stereo Transmitter is housed in a robust design enclosed in a full-metal half-rack case. It features a vibrant OLED display and is fully compatible with Sennheiser’s WSM control software. The transmitter allows for flexible frequency allocation and can support up to 16 channels. It comes with a rod antenna and a GA 3 rackmount set for easy mounting in a rack case. The SR IEM G4 offers a versatile and high-performance IEM transmitter solution with a transmission range of up to 100 meters (300 feet).
For more information, click here.
The transmitter has several features including a half-rack stereo design, a full-metal housing, and an OLED display for easy control. It allows for easy and flexible wireless synchronization between the transmitter and receiver through infrared technology. The SR IEM G4 is also compatible with Sennheiser’s WSM control software, which enables flexible frequency allocation. It supports up to 16 compatible channels and offers a bandwidth of up to 42MHz with 1680 selectable frequencies. The transmitter has a high RF output power, depending on country regulations, and a transmission range of up to 100 meters (300 feet).
The package includes the SR IEM G4 Stereo Transmitter, a rod antenna, a power supply, and a GA 3 rackmount set. It also comes with a quick guide, a safety guide, and a manufacturer declaration sheet.
The transmitter’s specifications include wideband FM stereo modulation with an MPX pilot tone. It has a frequency range of 863MHz – 865MHz and a maximum of 1680 receiving frequencies that can be adjusted in 25kHz steps. It offers 20 frequency banks, each with up to 16 factory-preset channels with no intermodulation, and 6 frequency banks with up to 16 programmable channels. The switching bandwidth is up to 42MHz, with a nominal deviation of +/-24kHz and a peak deviation of +/-48kHz. The MPX pilot tone has a frequency of 19kHz and a deviation of +/-5kHz. The transmitter’s frequency stability is +/-10 ppm, and it has a BNC socket 50 Ω antenna output.
The RF output power can be switched between low (typ. 10mW), standard (typ. 30mW), and high (typ. 50mW) depending on country regulations. The compander system used is Sennheiser HDX, and the AF frequency response ranges from 25Hz to 15kHz. The transmitter has 2 XLR-3 / 6.35mm (1/4) Jack Combo sockets for AF input, and the maximum input level is +22dBu. The total harmonic distortion is less than 0.9%, and the signal-to-noise ratio is greater than 90dB. The AF output is a 6.35mm (1/4) Stereo Jack socket balanced.
The temperature range for the transmitter is -10°C to +55°C. It requires a 12V DC power supply and has a maximum current consumption of 350mA. The dimensions of the transmitter are approximately 202mm x 212mm x 43mm, and it weighs approximately 980g.
CHECK PRICES AT ZZOUNDS
