The Sennheiser SKP 100 G4 Plug-on Transmitter is a device that allows you to turn any wired dynamic microphone into a wireless transmitter. This transmitter is compatible with the Sennheiser Evolution wireless G4 100P Series systems, making it suitable for a wide range of applications. The SKP 100 G4 Plug-on transmitter is known for its exceptional sound quality and sturdy construction. It is user-friendly and can be set up quickly. With its powerful and reliable wireless transmission, it offers an operating range of up to 100 meters (330 feet) and up to 8 hours of battery life.
If you want more information on the SKP 100 G4 Plug-on Transmitter, you can click on the link provided.
Some of the features of the SKP 100 G4 Plug-on transmitter include its ability to convert wired dynamic microphones into wireless transmitters, making it ideal for documentaries, mobile journalism, and audio for video applications. It offers excellent sound quality and is constructed with durability in mind. The transmitter is easy to use and has a fast setup time. It provides a powerful and reliable wireless transmission, and its battery can last up to 8 hours. The transmission range can reach up to 100 meters (300 feet).
In the box, you will find the SKP 100 G4 Plug-on Transmitter, 2 AA batteries, a quick guide, and a safety guide. The transmitter operates on wideband FM modulation with a frequency range of 606.6MHz – 613.5MHz. It has a maximum of 1680 adjustable frequencies in 25kHz steps, divided into 20 frequency banks. There is no intermodulation across the 12 factory-preset channels in each bank, and there is also one frequency bank with up to 12 programmable channels. The switching bandwidth can reach up to 42Mhz.
The SKP 100 G4 Plug-on transmitter has a nominal deviation of +/-24kHz and a peak deviation of +/-48kHz. The frequency stability is within +/-15 ppm, and it has an RF output power of 30 mW maximum. It features a pilot tone squelch that can be switched off and uses the Sennheiser HDX AF compander system. It has a frequency response range of 80Hz – 18kHz and a signal-to-noise ratio of at least 110 dBA with a 1mV peak deviation. The total harmonic distortion is less than or equal to 0.9.
Other specifications include an input voltage of 3.3V, an input impedance of 68 kOhms unbalanced, and switchable input capacitance. The input sensitivity can be adjusted within a setting range of 48dB in 6dB steps. The operating temperature range is -10°C to +55°C. The power supply can be achieved with 2 AA batteries or a BA 2015 Accupack. The nominal voltage for the batteries is 3V for non-rechargeable and 2.4V for rechargeable. The transmitter has a typical operating time of 8 hours and a current consumption of approximately 180mA at nominal voltage or less than or equal to 25µA with the transmitter switched off. Its dimensions are approximately 105mm x 43mm x 43mm, and it weighs around 195g including batteries.
CHECK PRICES AT ZZOUNDS
