Sennheiser SK 100 G4 Bodypack Transmitter E Band

zZounds

Sennheiser SK 100 G4 Bodypack Transmitter E Band
The Sennheiser SK 100 G4 Bodypack Transmitter is a robust bodyback unit designed to withstand the rigours of daily use on stage. With simplistic and intuitive wireless synchronization with your receiver via infrared the SK 100 G4 boasts exceptional sound and construction quality as well as simple operation with quick setup.

The device features rapid frequency allocation for up to 12 receivers by utilizing the new linking functionality. The SK 100 G4 can be used with up to 20 compatible channels and features up to a 42MHz bandwidth with 1680 selectable frequencies. Its powerful and reliable wireless transmission features an operation range of up to 100 meters with typical operating times of up to 8 hours.

Features include a robust bodypack transmitter for daily use on stage, easy and flexible wireless synchronization with the receiver via infrared, fast frequency allocation for up to 12 receivers via new linking functionality, and up to 20 compatible channels.

Additionally, it features up to 42MHz bandwidth with 1680 selectable frequencies fully tunable in a stable UHF range, high RF output power (up to 30mW) depending on country regulations, and a transmission range of up to 100 meters / 300 feet.

The package includes the SK 100 G4 Bodypack Transmitter, 2 x AA Batteries, Quick Guide, Safety Guide, and Manufacturer Declaration Sheet.

The specifications of the transmitter include wideband FM modulation, frequency range of 863MHz – 865MHz, transmission frequencies with a maximum of 1680 receiving frequencies adjustable in 25kHz steps, and 20 frequency banks each with up to 12 factory-preset channels with no intermodulation.

Other specifications include switching bandwidth of up to 42MHz, a nominal deviation of +/-24kHz, peak deviation of +/-48kHz, frequency stability of ≤ +/-15ppm, and RF output power of up to 30mW at 50Ω.

The compander system is Sennheiser HDX, and the frequency response is 80Hz – 18kHz for the microphone and 25Hz – 18kHz for the line. The signal-to-noise ratio is ≥ 110dBA with a total harmonic distortion of ≤ 0.9%.

The microphone/line input voltage is 3V with an impedance of 40kΩ unbalanced / 1MΩ. The input capacitance is switchable, and the setting range for input sensitivity is 60dB adjustable in 3dB steps.

The temperature range for operation is -10°C to +55°C. Power can be supplied by 2 x AA batteries or BA 2015 Accupack, with a nominal voltage of 3V for batteries and 2.4V for rechargeable batteries. The current consumption is typ. 180mA at nominal voltage and typ. 25µA with the transmitter switched off.

The operating time is typ. 8 hours, and the dimensions of the transmitter are approximately 82mm x 64mm x 24mm. The weight, including batteries, is approximately 160g.


CHECK PRICES AT ZZOUNDS