Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor 3-Pin LEMO

zZounds

Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor 3-Pin LEMO
Intelligent and flexible. The Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor is the ideal solution for connecting your condenser microphone with a 3-pin LEMO output connector to an XLR microphone input.

The adaptor converts the phantom power fed to it and supplies it to your microphone so you can get even more functionality out of your mic. You can make full use of your mic in a wired configuration in the studio as well as wirelessly with a compatible transmitter.

An integrated roll-off filter and switchable gain allow additional control over your signal. Plus with a rugged metal chassis you can be sure that your MZA 900 P-4 will perform reliably for years to come. This adaptor is designed to work with the Sennheiser HSP 2 HSP 4 HS 2 ME 102 ME 104 ME 105 MKE 2-4 and MKE Platinum-4-C microphones.

More info…

In The Box 1 x Sennheiser MZA 900 P-4 In-Line Phantom Power Adaptor 3-Pin LEMO Instructions Warranty Certificate

Features Used for connecting pre-polarised condenser mics to microphone inputs with 10-52V phantom power (P12 – P48)

A quick and flexible solution for mics to be used in both wired and wireless applications

Can be used with the following Sennheiser microphones: HSP 2 HSP 4 HS 2 ME 102 ME 104 ME 105 MKE 2-4 MKE Platinum-4-C

One and the same microphone can be used together with the adaptor for wired applications or with a compatible transmitter for wireless use

Can also be used as a cable tested for XLR microphone cables

Rugged metal chassis

0/-12dB switchable gain

125Hz (-3dB) 12dB/oct switchable roll-off filter

Two-colour control LED (phantom power audio peak)

Lockable 3-pin LEMO input socket

Male 3-pin XLR output socket

Fitted with a handy belt clip

Specifications Input Connector: Locking 3-pin SE jack socket

Output Connector: XLR-3M

Gain: 0/-12dB

Output Voltage: P12: 0.6V at 0dB gain P48: 1.8V at 0dB gain

Phantom Powering: P12 – P48 10 – 52V 2.6 – 2.8mA

Frequency Response: 20Hz – 20kHz

Output Impedance: 100 Ohms

Nominal Impedance: 100 Ohms

Minimum Terminating Impedance: At 0dB Gain: 5k Ohms (P12 – P48) At -12dB Gain: 2k Ohms

Operating Temperature: -20°C to +60°C

Length: 100mm

Diameter: 19/22mm

Weight: 60g


CHECK PRICES AT ZZOUNDS