Intelligent functionality and performance. The Sennheiser MEB 114-S W is a boundary layer microphone designed for table-top use. With a cardioid polar pattern, this powerful condenser mic is perfect for capturing vocals and speech with outstanding clarity and detail. A Sennheiser microphone capsule is securely installed within the rugged housing, delivering class-leading performance and reliability in a versatile format.
This powerful conferencing solution features a bi-colour LED ring that provides instant visual indication of your microphone’s status. There is also a programmable button, providing you with four selectable modes of operation – Push to Talk, Push to Mute, Toggle ON/OFF, and Permanent ON. Plus, a logic output on the underside can be used to trigger a camera or media control system.
The MEB 114-S W boasts a wide frequency range from 40Hz all the way up to 20kHz and is capable of recording sounds with a maximum SPL of up to 140dB. This makes it perfect for a wide range of applications, including presentations, conferences, and more. The microphone can be placed on any flat surface and connected to your conferencing system using the mic’s clip contact. With a sleek design, the MEB 114-S is an unobtrusive, high-performance choice for almost any style of interior.
In the box:
1 x Sennheiser MEB 114-S W Cardioid Table Boundary Microphone White
Quick Guide
Cable
Features:
– The perfect microphone upgrade for any conferencing system
– Programmable microphone button with four microphone modes – Toggle ON/Off, Push to Mute (PTM), Push to Talk (PTT), Permanent ON
– Bi-colour (red and green) LED ring provides instant visual status indication
– TTL logic OUT on the bottom side can trigger a camera or media control system
– High-quality Sennheiser microphone capsule
– Exceptional vocal clarity and speech intelligibility
– Rugged housing with a sleek design
Specifications:
– Transducer Principle: Pre-polarized condenser
– Polar Pattern: Cardioid
– Acoustics: Boundary layer microphone
– Dynamic Range: 111dB(A)
– Sensitivity: 10mV/Pa
– Frequency Response: 40Hz – 20kHz
– Maximum SPL: 140dB
– Nominal Impedance: 200 Ohms
– Equivalent Noise Level: A-Weighted: 29dB(A), As per CCIR 468-3: 39dB(CCIR)
– Output Connector: Clip contact
– Trigger Signal at Logic Connector:
– Logic IN (LED control)
– GND
– Logic OUT (switch signal)
– Logic Out: High Level Output Voltage: >2.4V, Low Level Output Voltage: >0.4V
– Logic In: High Level Input Voltage: >2V, Low Level Input Voltage: >0.8V
– Microphone Modes: Toggle ON/OFF, Push to Mute, Push to Talk, Permanent ON (external LED control)
– Colour: White
– LED Colours: Red, Green
– Power Supply: Phantom power P24 – P48
– Current Consumption: 5.3mA
– Operating Temperature: -10°C to +50°C
– Dimensions: 85mm x 100mm x 25mm (W x D x H)
– Weight: 291g
