The sE Electronics sE8 Condenser Microphone is the latest professional-grade studio microphone from SE bringing with it a host of new features that give it a place at the top of its class. A handmade capsule with an ultra-thin gold-sputtered diaphragm adorns the top of the microphone providing incredible transient response suitable for a wide variety of sound sources. Despite the thin diaphragm the sE8 is capable of recording up to a maximum SPL of 159dB(A) in case you ever felt the need to close-mic a fighter jet. Combine this with the two switchable attenuation pads and low-cut filters and you have one of the most versatile small diaphragm condensers available. This ultra-quiet (only 13dB(A)) and flexible microphone delivers clear balanced sound without colouration and is the ideal choice for studio and live sound engineers requiring an adaptable recording solution the world-over.
New Capsule Design Carefully crafted in sEs laboratories the sE8 incorporates a new backplate design into its construction. No matter how much EQ or filtering you apply this new design prevents harshness whilst simultaneously providing you with the highest dynamic range and SPL handling in its class. On top of this the sE8 features a hand-crafted gold-sputtered capsule with an ultra-thin diaphragm that has been tuned to perfection by technicians with decades of experience. This new capsule is built in a manner reminiscent of the worlds finest musical instruments and is truly worthy of recording them. -10dB/-20dB Pad The pad switch can be used if youre recording a very hot or loud signal. For miking up loud sound sources such as drums or a guitar cabinet the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp ensuring a high quality signal is delivered. Switchable 80Hz/160Hz Lo-Cut/Hi-Pass Filter The sE8 incorporates a handy lo-cut/hi-pass switchable filter into its circuitry. 80Hz or 160Hz lo-cut can be applied to decrease the level of proximity effect which is typical behaviour in cardioid pattern microphones if placed very close to the sound source or to isolate from low frequency rumble from other sources. High Performance Electronics The sE Electronics sE8 has been designed with a super-short signal path with no ICs and using only the best specially optimized Class-A electronics. As a result the sE8 is one of the quietest small diaphragm condensers you can buy and by far the quietest in its class. What Professionals Have Said “Sounds like a wickedly expensive high-end microphone.” – Bernhard Schurian Planet Music & Media Magazine “I recorded violin and it just did what it should do! A clear sound with warm highs it reproduces the natural sound of the instrument as it should be. Its a beauty in a perfect size easy to place wherever it needs to be placed!” – Titus Vadon Recording Engineer & Producer “The sE8s on the high-hats are a very big surprise. I have been looking forward for that crisp sound without the over-hyped top end…I was picking up subtle hits and ghost notes that had not been that well defined before. Overall I am very impressed.” – Gary Sharpe TM-FOH Between The Buried And Me TM-FOH – Every Time I Die In The Box sE Electronics sE8 Microphone x 2 Wind Screen x 2 Mic Clip With Thread Adapter x 2 Stereo Bar Metal Case sE Logo Sticker User Manual With Warranty Card Specifications Capsule: hand-Crafted Small Diaphragm True Condenser Capsule Polar Patterns: Cardioid Frequency Range: 20Hz – 20kHz Sensitivity: 25 mV/Pa (-32dBV) Max SPL (0.5% THD): 139/149/159dB SPL (0/10/20 dB Attenuation Pad) Equivalent Noise Level: 13 dB(A) Dynamic Range: 126/136/146dB (0/10/20 dB Attenuation Pad) Signal-To-Noise Ratio: 81dB Low-Cut Filter: 80Hz/160Hz 6dB/Oct Switchable Attenuation Pad: 10dB/20dB Switchable Powering: 48V According To IEC 61938 Electrical Impedance: 110 Ohms Recommended Load Imepdance: >1k Ohms Current Consumption: 2.7mA Connectivity: Gold-Plated 3-Pin Male XLR Dimensions: 23mm x 120mm / 0.91 x 4.72 (D x L) Weight: 141g / 4.97oz.
CHECK PRICES AT ZZOUNDS
