Radial Twin-Iso 2-Channel Line Level Isolator

zZounds

Radial Twin-Iso 2-Channel Line Level Isolator
Exceptional signal integrity with complete isolation. Meet the Radial Twin-Iso 2-Channel Line Level Isolator. This device is capable of withstanding up to +21dB without distortion whilst boasting an incredibly linear frequency response.

The Radial Twin-Iso is suitable for use with both balanced and unbalanced signals and features high-quality XLR inputs and outputs with the AES Standard configuration. Sharing Radials phenomenal build-quality the Twin-Isos 14-gauge steel I-beam chassis and outer shell ensure excellent protection for the internal components whilst the unique book-end design provides a protective zone for the Twin-Isos sockets and switches.

This road-ready line-level isolator is perfectly suited to a wide variety of applications.

Features:
– Stereo isolator capable of withstanding up to +21dB without distortion
– Eliminates hum and buzz caused by ground loops
– Suitable for balanced and unbalanced signals
– Exceptionally linear response from 20Hz to 20kHz
– Isolated XLR connectors eliminate chassis ground potential
– Jensen transformers provide 100 percent isolation to eliminate hum and noise causing ground loops
– Extra durable switches with metal outer casings rated at over 20000 cycles
– Double-sided military-spec PCB provides greater durability whilst the full ground plane reduces radio frequency interference
– 14-gauge steel I-beam chassis and outer shell prevent outside stress from torquing the PCB
– Book-end design creates a protective zone around the sockets and switches
– No-slip pad provides electrical and mechanical isolation and keeps the Twin-Iso from sliding around

Specifications:
– Audio Circuit Type: Passive line-level isolation transformer-based
– Number of Channels: Stereo (dual mono)
– Frequency Response: 10Hz to 50kHz (+/-1dB)
– Dynamic Range: 135dB
– Maximum Input: +21dBu at 1kHz, 1 percent THD+N
– Total Harmonic Distortion: 0.001 percent at 1kHz, +4dBu output
– Phase Deviation: 0.5° at 100Hz, 37° at 20Hz
– Input Impedance: 600 Ohms balanced
– Output Impedance: 600 Ohms balanced
– Transformer: Jensen
– Ground Lift: Disconnects XLR pin-1 at isolated output
– XLR Configuration: AES Standard (pin-2 hot)
– Connectors: XLR-F inputs, XLR-M outputs
– Construction: 14-gauge steel chassis and outer shell
– Finish: Durable powder coat
– Power: Passive, no power required
– Conditions: For use in dry locations only between 5°C and 40°C
– Dimensions:
– Width: 84mm / 3.3
– Height: 127mm / 5
– Depth: 48mm / 2
– Weight: 0.7kg / 1.55lbs
– Product Code: R800-1024-00


CHECK PRICES AT ZZOUNDS