The Radial StageBug SB-2 Passive DI Box is the ultimate companion for bass and keyboard players, offering crystal clear audio with no hums, buzzes, or distortion. It features simple yet powerful controls, including a pad switch to reduce input sensitivity and a lift switch to remove ground-loop noise. The SB-2 is designed to be portable and practical, fitting neatly into your instrument case and built to withstand knocks and drops. It guarantees professional sound and does not require batteries or power cables.
For those looking for a compact solution without compromising on quality, the SB-2 is the perfect choice. It utilizes an ultra-quiet isolating transformer to reduce unwanted noise and maintain clear connections on stage and in the studio. With a dedicated thru output, you can easily plug into your PA system directly and run long cables without signal degradation. This DI Box is specifically designed for active basses and keyboards and features an unbalanced hi-Z input to eliminate distortion. It also offers a balanced Lo-Z output for pristine connections to your PA system or audio workstation. The lift switch quickly reduces hum and buzz caused by ground loops. The SB-2 is built with a robust construction to protect against knocks, scratches, and scrapes.
In terms of specifications, the SB-2 is a two-channel mono or stereo output DI Box with a frequency response of 20Hz to 20kHz (+/- 1dB) and a dynamic range of 100dB. It has a maximum input of +20dB and a total harmonic distortion of 0.01% at 1kHz. The input impedance is 40k Ohms unbalanced, while the output impedance is 2.8k Ohms balanced. The DI Box features a custom-designed transformer, a -10dB input pad, and an auto merge function that sums left and right sources to mono at the XLR output. It also includes a ground lift switch to disconnect pin-1 at the 1/4″ TRS outputs. The input connector is a 3.5mm (1/8″) integrated cable with a length of 1.5m (5″), and the output connectors are 1/4″ TRS stereo and XLR-M mono merge. The chassis and outer shell are constructed with 14 gauge steel and finished with baked enamel. The size of the DI Box is 4.5″ x 1.85″ x 1.35″ (114mm x 47mm x 34mm), and it weighs 0.55 lbs (250 grams). The shipping size is 4″ x 3″ x 6.5″ (102mm x 76mm x 165mm), and it weighs 0.8 lbs (365 grams). The SB-2 is a passive device that does not require power, and it comes with a Radial 3-year transferable warranty.
For more information, click on the link below.
CHECK PRICES AT ZZOUNDS
