Radial Pro48 Active DI Box

zZounds

Radial Pro48 Active DI Box
Love performing live? Then plug in and play like a pro. The Radial Pro48 Active DI Box ensures the best sound possible. With a high-performance transformer on board, you get pristine signal integrity for your guitars and other line-level instruments. No unwanted noise. Just great sound.

The Pro48 eliminates buzzing from ground loops, so you’ll always get the clearest sound. And with a -15dB pad at hand, you’ll never have to worry about distortion when plugging in your high-output instruments. Perfect for any setup. Thanks to its robust compact construction, the Pro48 can be introduced into the tightest of stage or studio spaces. Never worry about knocks and drops getting in the way of your performance. With its metal chassis, you’re ready for any challenge.

For the musician who demands the best performance and practicality combined. At the heart of the Pro48 is a custom-built transformer delivering a frequency response of 20Hz to 40kHz. No matter how high your signal level gets, you can rest assured that this active workhorse is able to withstand tremendous transients without distortion.

The Pro48 is the ultimate companion for battery-powered active basses and acoustic guitars that often overload other DI boxes. Instead, Radial promises an unfaltering sonic performance with a smooth linear response and increased headroom.

Features of the Pro48 include compact size, perfect for stage and studio use, handling huge transients without distorting, increased dynamic range and headroom, elimination of noisy ground loops with built-in transformer isolation, pristine signal for line level instruments with a 1/4″ jack input, no batteries or power supply required thanks to 48V phantom power operation, LED indicator to check 48V phantom power, easy reduction of input sensitivity for basses and keyboards with the -15dB pad switch, hi-impedance thru that will not load-down instrument tone, and high-quality powder coat for durability.

Specifications:
– Audio circuit type: Proprietary analog circuit with low-noise op-amp
– Frequency response: 20Hz-20kHz (±1.5 dB)
– Dynamic range: 99dB
– Noise floor: -82dB below 0dBu
– Maximum input: +9dBu
– Phase deviation: +28° at 20Hz, +1° at 1kHz, -2° at 20kHz
– Input impedance: 220kΩ – 1/4″ input
– Output impedance: 600Ω – XLR output
– Input pad: -15dB
– Ground lift: Disconnects pin-1 at XLR output
– XLR configuration: AES standard (pin-2 hot)
– Power: 48V phantom – proprietary digital switching
– Construction: 14 gauge steel chassis and outer shell baked enamel finish
– Size: 2.75″ x 4.25″ x 1.75″ (70 x 108 x 45mm)
– Weight: 1.2 lb (544 g)


CHECK PRICES AT ZZOUNDS