The Radial MC3 Monitor Controller is a device that ensures your audio is free from distortion and coloration. Equipped with active monitor switches, it provides incredibly rich and clean sound.
The controller features left and right 1/4 TRS input connectors, as well as two output channels for two pairs of monitors with left and right 1/4 TRS connectors. This allows you to easily audition mixes with a subwoofer alongside your monitors or route stereo audio signals to two pairs of monitors in different zones or rooms.
On the top of the controller, you’ll find easily accessible level adjustment controls for each output. This feature enables you to make micro adjustments and achieve the perfect balance when cross-referencing.
Furthermore, the Radial MC3 includes a built-in headphone amp with individual headphone outputs. This makes it an ideal solution for listening to mixes and switching between monitors during studio sessions.
If you’d like more information on the Radial MC3 Monitor Controller, you can click the following link: More info…
Here are some key features of the monitor controller:
– Passive studio monitor switcher
– Integrated headphone amp with level control
– Dual 1/4 jacks and a 3.5mm stereo jack for headphones
– Controls two sets of monitors and a subwoofer
– Mono sum for AM radio and phase check
– Individual set and forget controls to fine-tune levels
– Bookend design protects switches and potentiometers
– Durable powder-coated finish
For detailed specifications, refer to the following information:
– Audio Circuit Type: Passive
– Input Connectors: 2 x 1/4 TRS (Left & Right)
– Monitor Outputs: Out-A: 2 x 1/4 TRS (Left & Right), Out-B: 2 x 1/4 TRS (Left & Right)
– Output Connectors: Sub: 1 x 1/4 TRS, Aux: 1 x 1/4 TRS
– DIM: Variable up to -72dB
– Common Mode Rejection Ratio: -51dB @ 55Hz
– Dynamic Range: 114dB
– Noise Floor: Stereo: -108dBu, Sub: -95dBu, Headphones: -87dBu
– Maximum Input: +14dBu
– Total Harmonic Distortion: 0.001 Percent @ 1kHz / 0dBu Output
– Inter-Modulation Distortion: 0.001 Percent @ 1kHz / 0dBu Output
– Input Impedance: 4.4k Ohms Balanced / 2.2k Ohms Unbalanced
– Output Impedance: Varies with Level Adjustment
– Chassis: Powder-Coated 14 Gauge Steel
– Power Supply: +15VDC/400mA (Included)
– Dimensions: 84mm x 127mm x 48mm / 3.3 x 5 x 2
– Weight: 600g / 1.32lbs
– Product Code: R800-1410-00
