Radial IceCube IC-1 Balanced Line Isolator and Hum Eliminator

zZounds

Radial IceCube IC-1 Balanced Line Isolator and Hum Eliminator
The Radial IceCube IC-1 is a single channel passive isolator designed to eliminate hum and buzz caused by ground loops. It is specifically designed for use with balanced signals. The IceCube IC-1 has a linear frequency response from 20Hz to 18kHz, with less than 0.01 percent distortion when handling +10dB at 20kHz. It features a proprietary Eclipse transformer that isolates the input from the output and eliminates unwanted DC currents.

The IceCube IC-1 is housed in a lightweight and compact 16 gauge steel chassis, making it durable and suitable for use in live performance venues. It offers a plug and play solution for removing unwanted noise and is ideal for isolating DJ mixers, power amplifiers, and active full-range speakers.

In addition to its performance capabilities, the IceCube IC-1 also has several convenient features. It has a ground lift switch that disconnects Pin-1 on the XLR output, helping to further eliminate potential noise issues. The chassis has a powder-coated finish for added protection and durability. It also has high-quality and heavy-duty reinforced XLR connectors.

The IceCube IC-1 is a passive RF filter that blocks radio frequency interference from bleeding into audio lines, ensuring a clean and interference-free signal. It has a compact size and is easy to use, making it a convenient solution for any audio setup.

Some technical specifications for the IceCube IC-1 include a frequency response of 20Hz to 20kHz with a ±1dB accuracy, a dynamic range of over 135dB, and a custom-made Eclipse transformer. It has 3-pin XLR input and output connectors and a maximum input level of 15dBu. The ground lift feature disconnects Pin-1 at the XLR output. The IC-1 has a gain of 0dB or -5.7dB, depending on the load, and a clip level of 25dBu. It has an equivalent input noise of 110dBu and intermodulation distortion of 0.002 percent at -10dBu. The input impedance is 8.66k Ohms with a 10k Ohms load, and the output impedance is 600 Ohms. The chassis dimensions are 107mm x 34mm x 41mm, and it weighs 0.18kg.

Product Code: R800-1031-00

For more information, please visit the link provided.


CHECK PRICES AT ZZOUNDS