Signal transmission made easy. The Radial Catapult Mini RX 4-Channel transmitter allows you to send four channels of analog mic or line level audio through a standard shielded Cat 5 or Cat 6 Ethernet cable. This removes the need for messy cable runs and bulky multi-channel audio snakes. The Catapult ensures clean and safe signal transfer in a compact and lightweight package.
The four male XLR connectors are connected via straight wire to the RJ45 socket ensuring that your audio passes through without having to worry about colouration or distortion. No digital audio conversion is needed, your signal will maintain full integrity with no noise or interference. Thanks to Radials renowned build quality, the Catapult Mini RX is sure to provide you with years of reliable routing.
Features:
– Compact passive audio snake that enables you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable
– Equipped with female XLR connectors for connecting to either mic or line-level sound sources
– RJ45 output connector for hooking up standard Cat 5 or Cat 6 Ethernet cable running to your receiver
– Allows you to transmit mic or line-level signals from one location to another without signal loss, noise, or interference
– No digital audio conversion is needed, your high-quality analog signal is maintained throughout the signal chain
– Allows you to utilize standard shielded Cat 5 Ethernet cable which is widely available, lightweight, and economical
– Easy to connect two Catapult modules which then use analog conductors in the cable to deliver four balanced audio lines to any destination
– Enables you to make use of pre-existing cable installations that are pre-wired for Cat 5
– Perfect for transmitting audio between distant rooms without the need to install or supply new cabling
– Removes the need for bulky and expensive multi-channel audio cable, allowing contractors to benefit from pre-installed network cables for connecting rooms
– Passive design requires no power to operate and doesn’t require any signal conversion
– Straight-wire connections from the XLR connectors to the RJ45 connector ensures audio passes through without coloration or distortion
Specifications:
– Audio Circuit Type: Passive splitter
– Frequency Response: 7Hz – 20kHz
– Dynamic Range: 140dB
– Total Harmonic Distortion: 0.0005% at 1kHz
– Common Mode Rejection Ratio: >103dB
– Maximum Input: +35dBu
– Input Connector: Female XLR
– Output Connector: RJ45
– Pin Assignments: RJ45 Pin 1: XLR CH 4 Pin 2, RJ45 Pin 2: XLR CH 4 Pin 3, RJ45 Pin 3: XLR CH 3 Pin 2, RJ45 Pin 4: XLR CH 2 Pin 2, RJ45 Pin 5: XLR CH 2 Pin 3, RJ45 Pin 6: XLR CH 3 Pin 3, RJ45 Pin 7: XLR CH 1 Pin 2, RJ45 Pin 8: XLR CH 1 Pin 3
– Construction: 16-gauge steel chassis and outer shell
– Power: Passive, no power required
– Dimensions: 105mm x 40mm x 33mm / 4.125 x 1.56 x 1.31 (L x W x D)
– Weight: 0.4kg / 0.85lbs
– Warranty: Radial 3-year transferable
Connectivity:
– Controls and Indicators: Female XLR Inputs: For connecting to balanced mic or line-level sources, RJ45 Output: Sends analog audio over Cat 5 or Cat 6 Ethernet cable
– Product Code: R800-8028-00
