The QSC KW153 Active 3 Way PA Speaker is a multi-purpose loudspeaker with powerful capabilities. Incorporating all the groundbreaking electronic attributes of the K Series the KW153 offers 1000W of Class D power as well as maximum clarity and speaker efficiency. Boasting 75 degrees of conical coverage the KW153 provides a uniform frequency response across the entire audience area. The KW153s 15″ woofer 6.5″ midrange woofer 1.75 diaphragm compression driver and maximum SPL of 134 dB peak deliver a full sound that reduce the risk of feedback and distortion. The KW153 has an attractive and professional appearance with the rugged texture-painted birch enclosure with tour-grade 16 gauge steel grilles. Thanks to their lightweight design and comfortable ergonomic handles the speakers in the KW series are easy to transport between venues.
High output Like K Series each of the four KW Series models features a QSC designed 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition every model is fitted with the identical high-output 1.75″ HF device (full-range models) and woofers of the same high quality design regardless of speaker size. Defined Coverage Area Consistent sound for your entire audience. QSCs Directivity Matched Transition technology matches the natural high-frequency coverage angle of the KW153s woofer with that of the compression driver at the crossover frequency. This smooth transition means no more lost mids at the edges of the speakers dispersion angle. With this balanced coverage the listening area in front of your speakers is filled with the full frequency spectrum of your music so everyone can experience the sound to its full potential. Tilt-direct™ The KW122 and KW152 feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Features 15″ Woofer; 6.5″ midrange woofer; 1.75″ diaphragm compression driver 75° Nominal coverage angle Maximum SPL 134 dB peak 1000-watt Class D power modules in all models (2 x 500 W continuous) Onboard mixer with two combo XLR and 1/4″ inputs and stereo RCA inputs (three audio input sources); two direct channel outputs and single summed balanced output Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field Rugged texture-painted birch enclosures Four-position Mic/Line gain (full-range models) Tour-grade 16 gauge steel grilles Comfortable ergonomic handles 35 mm pole sockets with Tilt-Direct™ M10 rigging points for suspended installation Extensive DSP enhances system performance DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area eliminating unnatural “dead” or “hot” frequency zones. Intrinsic Correction™ first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field. DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping. Specifications: Configuration: 15″ 2-way multipurpose Transducers: 15″ cone transducer 1.75″ diaphragm compression driver Frequency Response (-6 dB): 47Hz – 18kHz Frequency Range (-10 dB): 44Hz – 20kHz Nominal Coverage (-6 dB): 60° axisymmetric Maximum SPL: 133 dB peak Power Output: 1000W Class D (500W LF 500W HF) continuous 2000W peak Controls: Power Gain A Gain B Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB) LF Mode (Ext Sub/Norm/DEEP™) HF Mode (Flat/Vocal Boost) Front LED (On/Off/Limit) Indicators: Power Signal A Signal B Standby Limit Mic (24 dB and 36 dB settings) Connectors: Balanced female XLR/ 1/4″ line/mic level input Balanced female XLR/ 1/4″ line level input Dual Balanced male XLR full range line level out Balanced male XLR “mix” out Stereo RCA line level input Remote gain control Locking IEC power connector Cooling: On demand 50 mm variable speed fan Amplifier Protection: Thermal limiting output overcurrent overtemperature muting GuardRail™ Transducer Protection: Thermal limiting excursion limiting AC Power Input: Universal power supply 100-240 VAC 50 to 60 Hz AC Power Consumption (1/8 Power): 100 VAC 2.3 A 120 VAC 2.01 A 230 VAC 1.13 A Input Impedance: Channel A (0dB gain): 38kΩ balanced 19kΩ unbalanced Channel A (+12dB gain): 10kΩ balanced 5kΩ unbalanced Channel A (+24dB gain): 2.66kΩ balanced 1.33kΩ unbalanced Channel A (+36dB gain: 660Ω balanced 330Ω unbalanced Channel B XLR/ 1/4″ 38kΩ balanced 19kΩ unbalanced Channel B RCA: 10kΩ Enclosure: Material: 15mm painted birch plywood Finish: Black textured paint Grille: Black powder coated 16 gauge steel Dimensions: 43.1″ x 18.5″ x 16.8″ 1094 mm x 470 mm x 427 mm
CHECK PRICES AT ZZOUNDS
