The Primacoustic Max Trap is a combination broadband absorber and bass trap that is corner-mounted to control excessive bass in a room. Ideal for fine-tuning the sound of your home studio or practice room the Max Trap combines three acoustic principles to offer superb control over your audio.
Superb Sound Control The Primacoustic Max Trap offers superb sound control which is achieved by combining three acoustical principles into a single device: to handle mid-range and upper frequencies a 3″ thick front absorptive panel made from 6 lbs. per cubic foot high-density encapsulated fiberglass is employed. Behind the acoustic panel is a stretched diaphragmatic dense-mass membrane that acts as a low frequency resonator to absorb bass down to 65Hz. Wood Composite Enclosure Behind the membrane is an air cavity that is created by the wood composite enclosure which serves to further attenuate bass in the troublesome 100Hz region. The MaxTrap enclosure is made from MDF wood composite with a black easy to clean melamine finish and ships flat to save freight. Final assembly is performed on site using a simple household screwdriver and building a MaxTrap takes about 15 minutes from start to finish! Features High performance corner mounted bass trap Suspended diaphragm absorbs bass down to 50Hz High density front absorber controls highs & mids Ideal for small rooms where modes cause problems Specifications Frame Material: Grey melamine laminated MDF Dimensions: Width: 24″ Depth: 48″ Height: 19″ Panel Material: Formed semirigid inorganic glass fibers Density: 6.0 lbs. pcf. (96 kg/m3) Fabric Facing: Acoustically transparent polyester Diaphragmatic Membrane: Loaded vinyl 1 lbs. pcf.
CHECK PRICES AT ZZOUNDS
