Neumann TLM 170 R mt Switchable Studio Microphone Stereo Set Black

zZounds

Neumann TLM 170 R mt Switchable Studio Microphone Stereo Set Black

Perfect for stage and studio. The Neumann TLM 170 R mt Switchable Studio Microphone is the perfect blend of technical innovation and heritage. Forgoing a traditional output transformer the TLM 170 R boasts an electronic circuit. Made from only the finest components the circuitrys design ensures excellent rejection and prevents any interference that may compromise the quality of the balanced audio output. The large diaphragm capsule provides a smooth frequency response with all 5 polar patterns for an exceptional sonic performance. Get the sound right at source. Take advantage of the on-board controls to ensure you spend more time mixing and less time fixing! The handy 10dB attenuation pad is perfect for decreasing the sensitivity of the capsule to minimise the risk of clipping and distortion. Whats more the roll off switch allows you to reduce rumble and proximity effect from compromising your recording experience. With zero off-axis colouration recordings using this microphone will sound incredibly natural. Its never been easier to make sounds translate from the room to the speaker than it is with the TLM 170 R. For perfect stereo recordings use the two microphones together!

More info…

Selectable polar patterns The TLM 170 R incorporates five different directional polar patterns for a truly flexible performance. The polar patterns available are omnidirectional cardioid figure-8 hypercardioid and wide-angle cardioid. Cardioid is excellent for delivering a tight-focused sound whilst providing excellent off-axis rejection of around -6dB of unwanted noise and ambience. This is a great polar pattern to rely on when recording live performances either on-stage or in-the-studio. Hypercardioid and wide-angle cardioid are virtually the same but offer different rejection angles. Fig. 8 picks up sound from the front and the back of the capsule whilst rejecting all sound coming from the side. This pattern has been a go-to trick for many producers recording two background vocals. When paired with another fig.8 microphone and carefully positioned it can also work wonders on capturing vocals and guitar from a single performer simultaneously. However beware. Utilising this positioning enhances close proximity effect which can lead to an unnatural amount of low-end being reproduced by the microphone. Theres good reason why many radio broadcasters opt for this pattern! When you want to capture natural recordings it doesnt get much better than omni. Omnidirectional means that sound is picked up by the capsule within a 360 degree radius. Selecting this pattern allows you to get up-close on sources without the risk of proximity effect being introduced. This is a favoured pattern for many Grammy award winning engineers and producers when recording multiple string and brass players. It can also make the “Levee Break” when heavily compressed and used for drum room microphones! Whats included? 2 x Neumann TLM 170 R Switchable Studio Microphones in Nickel 2 x EA 170 elastic suspension mount 2 x Dust cover 1 x Aluminium case Features Local & remote controlled large diaphragm microphone Pressure-gradient transducer with double membrane capsule Five directional polar patterns: omnidirectional wide angle cardioid cardioid hypercardioid figure-8 Patented circuitry for remote & local switching of directional patterns Switchable low frequency roll-off & 10 dB preattenuation Tiltable elastically suspended bracket mount Ideal for close miking of instruments with high sound pressure levels Extremely low self-noise and an impressive dynamic range Specifications Acoustical Operating Principle: Pressure Gradient Transducer Directional Pattern: Omnidirectional Wide Angle Cardioid Cardioid Hypercardioid Figure-8 Frequency Range: 20Hz – 20kHz Sensitivity: 8 mV/Pa Rated Impedance: 50Ω Rated Load Impedance: 1000Ω Signal-To-Noise Ratio CCIR: 68 dB Signal-To-Noise Ratio A-Weighted: 80 dB Equivalent Noise Level CCIR: 26 dB Equivalent Noise Level A-Weighted: 14 dB-A Max SPL for THD: 144 dB With Preattenuation: 154 dB Max Output Voltage: 10 dBu Power Supply: 48V ± 4V Current Consumption: 3 mA Connector: XLR 3 F Colour: Black Weight: 1.2 kg Dimensions Diameter: 60 mm Length: 152 mm Product Code: 008504


CHECK PRICES AT ZZOUNDS