Take on any task. The Neumann TLM 107 Microphone is an innovative and versatile large diaphragm condenser microphone that is perfect for recording both vocals and instruments. The TLM 107 microphone features a pressure gradient transducer with five selectable polar patterns an pre-attenuation switch and a low-cut filter. The TLM 107 is capable of handling loud sound sources without distortion while retaining the natural tonal characteristics and a smooth frequency response across of the directional patterns. The included case and shock mount ensure incredible protection and unparalleled capture at all times.
Unparalleled performance The TLM 107 has a new sound transducer with outstanding impulse fidelity. The Neumann TLM 107 features five selectable polar patterns – omnidirectional cardioid figure-8 wide-angle cardioid and hypercardioid – that allow you to optimise the acoustic performance to suit a range of applications. Ensuring accurate audio reproduction across the entire frequency range of 20Hz to 20kHz The TLM 107 delivers balanced sound with an almost linear reproduction up to 8 kHz and a slight boost in the highest frequencies that adds presence and clarity to the vocals. The TLM 107 is particularly good at naturally reproducing speech – especially the critical S sound. The grille is optimised for low sensitivity to pop sounds and the sound transducer is edge-terminated with both diaphragms at ground voltage. This ensures good sensitivity to dust and humidity. Professional-quality components The Neumann TLM 107 is a transformerless microphone that features an electronic circuit instead of a traditional output transformer. This innovative design ensures excellent rejection and prevents interference that commonly influences the balanced audio output. Additionally the TLM 107 has self-noise of only 10dB-A and is capable of handling sound pressure levels up to 141dB without distortion. Innovative and versatile The TLM 107 is equipped with a single navigation switch which allows you to control all of the microphones functions. A light beneath the chrome ring highlights the directional pattern while LEDs to the left and right of the switch indicate the Pad and Low Cut status. The 40Hz Low Cut setting reduces interference noise below the range of fundamental tones while the 100Hz setting is perfect for speech and vocal recording. The Pad switch allows you to increase the maximum sound pressure level from 141dB to 153dB and is suitable for recording even the loudest instruments with crystal-clear definition. Whats included? 1 x Neumann TLM 107 in Nickel 1 x EA 4 elastic suspension 1 x operating manual Features Five directional polar patterns Large-diaphragm microphone Sound free from colouration Low self-noise Ideal for studio broadcasting & demanding home recording applications Specifically developed sound transducer Balanced sound over entire frequency range Acoustically optimised grille Maximum sound pressure level of 141 dB SPL Includes elastic suspension mount Specifications Acoustic Operating Principle: Pressure Gradient Transducer Directional Pattern: Omnidirectional Wide Angle Cardioid Cardioid Hypercardioid Figure-8 Frequency Range: 20Hz – 20kHz Sensitivity At 1kHz Into 1kΩ: 11 mV/Pa Rated Impedance: 50Ω Rated Load Impedance: 1kΩ Equivalent Noise Level CCIR: 22 dB Equivalent Noise Level A-Weighted: 10 dB-A Signal-To-Noise Ratio CCIR: 72 dB Signal-To-Noise Ratio A-Weighted: 84 dB Maximum SPL For THD 0.5 Percent: 141 dB With Preattenuation -6 dB: 147 dB With Preattenuation -12 dB: 153 dB Max Output Voltage For THD 10 dBu Power Supply: P48 Current Consumption: 3.2 mA Required Connector: XLR 3-Pin Female Weight: 445 g Dimensions Diameter: 64 mm Length: 145 mm Product Code: 008764
CHECK PRICES AT ZZOUNDS
