The Neumann MA 1 Monitor Alignment Kit with KH 750 DSP Subwoofer adds depth and detail to your existing monitor setup. With an individually calibrated measurement microphone tuned subwoofer and user-friendly software its like having an expert engineer right in the room. Mix master and monitor with precision. The Neumann KH 750 DSP Active Subwoofer is engineered to deliver exceptional acoustic performance. Its compact and powerful with a 10″ long throw woofer on board. Complete with the Neumann.Control app you can get the best sound from the palm of your hand. The best possible sound for home studios and professional control rooms. The MA 1 Monitor Alignment software automatically calibrates your stereo monitors. Advanced calibration algorithms make it easy to get world class results no matter where you mix master and monitor.
Neumann MA 1 Monitor Alignment Studio sound made easy No special drivers. No additional plug-ins. All alignment data is stored directly into your DSP-powered monitors. Adjust phase and amplitude with the software. You dont need special acoustic knowledge to get great results. This kit does the hard work for you. Neumann KH 750 DSP Active Studio Subwoofer Everything you need right at your fingertips Thanks to the Neumann.Control app speaker set-up has never been easier. Through IP networking you can easily identify speakers in the same room easily assigning them to individual positions connected and controlled directly from your tablet or smartphone. With Neumann’s Guided Alignment you can achieve optimised speaker arrangements tailor-made to your surroundings. For expert users Neumann.Control offers Manual Alignment. With an 8-band parametric EQ speaker levels and delays can be adjusted to ensure you always get the sound you need. Take complete control of your arrangement with adjustable operation parameters. From volume preset levels mutes groups solos and more. Your sound your way all from the palm of your hand. What’s in the box 1 x MA 1 Microphone 1 x Neumann KH 750 DSP Active Studio Subwoofer 1 x Microphone clamp 1 x Quick guide 1 x Safety guide Software is downloadable Features Neumann MA 1 Monitor Alignment Exceptional acoustic results for stereo home and professional studio setups Highest accuracy for tonality and impulse reproduction Purpose built for stereo pairs of Neumann studio monitors Correct your room with ease thanks to advanced calibration algorithms Developed by the world’s leading institute for audio signal processing (IIS) for the best monitor quality possible Easy to use software compatible with both Mac and PC No plug-in or special audio drivers required – everything is stored in the DSP-powered monitors for ease of use Optimised amplitude response and phase thanks to dedicated software Comes fully equipped with an individually calibrated measurement microphone Neumann KH 750 DSP Active Studio Subwoofer Perfect for extending your KH 810 KH 870 and KH 805 subwoofer systems Combats standing waves with an ultra-stiff wooden cabinet design Huge bass from a compact enclosure Deep articulate bottom end from long-throw bass driver Low harmonic distortion for ultra-precise sound reproduction Flexible operation via 2.0/0.1 bass management Tailor your subwoofer to the correct application with four routing modes (stereo 80 Hz bass management external bass management LFE up to 120 Hz LFE full range) Pristine signal integrity from electronically balanced analogue XLR inputs and outputs Wide range input gain and output level controls Total control of your sound with 8-position phase control continuous low-cut control and parametric equaliser Versatile switch mode power supply for universal use Eliminate ground loop noise with the dedicated lift switch Low heat dissipation amplifiers with large headroom and sophisticated protection circuitry Separate thermo limiter to protect the voice coil and power amplifier Connect to your existing network infrastructure with the network connector using standard IP protocol User friendly back panel gives full easy access to speaker controls and connections Standby function reduces power consumption when not in use Specifications Neumann MA 1 Monitor Alignment Acoustical operating principle: Pressure transducer Directional pattern: Omnidirectional Frequency range: 20Hz – 20kHz Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software) Rated impedance: 50 ohms Rated load impedance: 1000 ohms Equivalent noise level CCIR: 39dB Equivalent noise level A-weighted: 27 Db-A Maximum SPL for THD 0.5 : 132dB Signal-to-noise ratio CCIR (re. 94 dB SPL): 55dB Signal-to-noise ratio A-weighted (re. 94 dB SPL): 67 dB Maximum output voltage: 10dBu Supply voltage (P48 IEC 61938): 48V +/- 4V Current consumption (P48 IEC 61938): 3 mA Matching connector: XLR3F Weight: 37g Diameter: 23mm Length: 117mm Neumann KH 750 DSP Active Studio Subwoofer Free Field Frequency Response ±6 dB: 16 – 800 Hz Free Field Frequency Response ±3 dB: 18 – 750 Hz Sine Wave Output with a THD 95 dB SPL (>70 Hz) Bass capability: Max. SPL in half space at 3 THD at 1m (averaged between 50 Hz and 100 Hz): 105.0 dB SPL Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu): Controller Design: Digital; active Crossover Frequency: 80 Hz fixed or 60 – 100 Hz via Neumann.Control Crossover Slope: 24 dB/oct; 4th order Equalisation (Low-cut): 30 Hz; 0 – -12 dB Phase: 0; 45; 90; 135 and 0/180 deg Equalisation (via Neumann.Control Software): 8 x full parametic IIR + low/high shelf global balance FIR Phase Correction: For connected analogue loudspeakers: Linear phase (170 Hz – 16 kHz; +/- 45°) Latency: 1.5 ms (A-D-A); 1.2 ms (D-A) Delay (User-adjustable Delay Range): 0 – 100 ms and 2 x 0 – 20.8 ms Output Power Woofer Amplifier (THD+N with Limiter Deactivated 10 ): 256 W Volume Control Range; Resolution (via Neumann.Control): 0 – -∞ dB; 0.1 dB Signal Routing Modes: Right; External Bass Management; 2 x LFE Input Gain Control (Sensitivity): +2 – -12 dB Output Level Control (Output Level at 1 m Based on 0 dBu Input Level): 94; 100; 108; 114 dB SPL Analogue Inputs: 2 x XLR: analogue electronically balanced Analogue Outputs: 2 x XLR; analogue electronically balanced Analogue Input Impedance: >13 kΩ Max. Input Level: CMRR: >56 dB @ 15 kHz Crosstalk (1 kHz) Level Matching: Analogue Dynamic Range; THD+N: 119 dB(A); Digital Inputs: BNC (75 Ω): AES3; S/P-DIF Digital Outputs: BNC (75 Ω): AES3 A/D Converter:Resolution; Design: 16 – 24-bit DAC; Δ∑ Sampling Rate: 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz Dynamic Range A-D-A: >120 dB(A) Dynamic Range D-A: >123 dB(A) Mains Power Supply (Input Voltage; Frequency): 100 – 240 V ; 50/60 Hz Power Consumption (Standby / Idle / Full Output): Standby: Disabled; 90 mins (default); user defined in software Drivers Magnetically Shielded (Woofer): 265 mm (10”) Cabinet Surface Finish Colour (Custom): Painted Metallic Anthracite (RAL 7021) Baffle Cover: Included metal grille Dimensions: 383 x 330 x 383 mm Weight: 19.5 kg Product code: MA1-KH750
CHECK PRICES AT ZZOUNDS
