The Neumann KH 120-II Active Studio Monitor Pair in White with Free MA 1 is a pair of Neumanns newest revised studio monitors alongside their renowned monitor alignment system for highly accurate calibration in a limited-edition bundle. Re-engineered from the ground up the KH 120-II offers extended frequency response that provides bass down to 44 Hz. Also boasting revised amplification to power its 1-inch tweeter and 5.25-inch woofer these studio monitors deliver a far greater sound output level than the previous model. Perfect for mixing and mastering alike these compact studio monitors will fit perfectly into both home and professional studios. The KH 120-II maintains the full accurate sound that made them a staple while improving their linearity in not just frequency response but also phase response making everything come through with exceptional clarity. Very low component tolerances provide accurate stereo imaging that helps these monitors provide width when chained into immersive or surround mixing setups. Neumann have also improved the internal DSP engine adding compatibility with their MA 1 Monitor Alignment system to adjust response to deliver a completely flat response thats tuned to your room. The Neumann MA 1 Monitor Alignment takes the difficulty out of room correction. With an individually calibrated measurement microphone and user-friendly software. The best possible sound for home studios and professional control rooms the MA 1 software automatically calibrates your stereo monitors. Advanced calibration algorithms make it easy to get world class results no matter where you mix master and monitor. Please Note: This promotion is available until the 31st of December 2023 any purchases made after this date will not include MA 1.
Advanced monitoring bundle Available for a limited time this free bundle pairs Neumanns newly redesigned studio monitors with their MA 1 monitor alignment system. With the KH 120-IIs DSP adding compatibility with the MA 1 their sound signature can be adjusted and tailored to the issues within your studio space. No matter where no matter what the issues are this pairing gives you some of the most accurate monitoring you could ask for. This promotion is available only until the 31st of December 2023. Flat and accurate Accuracy has always been Neumanns main goals in studio monitor and headphone design. As such the KH 120-II deliver a supremely consistent frequency response throughout its extended range – from 44 Hz to 21 kHz with a maximum deviation of ±3 dB. A similarly linear phase response prevents smearing for exceptional clarity. Combining this with highly efficient Class D amplification these studio monitors reduce THD to an absolute minimum even when cranked to maximum volume. Room correction DSP In addition to the mechanical improvements to the amplification and drivers on the KH 120 monitors this new edition also features DSP that adds compatibility with Neumanns MA 1 Monitor Alignment System. This will help you make the most of the speakers linear frequency response tuning it to your room to reduce unwanted resonances and standing waves from interfering with your mixing or mastering. Efficient and energy saving The redesigned Class D amplifier in these studio monitors has been made more efficient to save energy when not in use. While typically providing 100 watts of power to the tweeter and 145 watts to the woofer when idle the amplifier will consume a mere 17 watts. And when in its automatic standby mode it will consume a modest 0.3 watts. Great for running an energy efficient studio at home the KH 120-II offers great power whenever its needed. What’s in the box 2 x KH 120-II Active Studio Monitors White 1 x MA 1 Microphone 1 x Microphone clamp 1 x Quick guide 1 x Safety guide Software is downloadable KH 120-II Features New and updated version of Neumanns KH 120 studio monitors Perfect for mixing and mastering in home or professional studios 5.25″ woofer and 1″ tweeter accurately recreate Linear frequency and phase response for highly accurate monitoring Extended low end down to 44 Hz Improved sound output level for louder punchier sound DSP engine improves performance and offers automatic room alignment when paired with MA 1 Full detailed stereo imaging thanks to precise component tolerances Analog XLR and S/PDIF RCA inputs for broad connectivity Combines with other KH-series speakers for immersive and surround sound mixing setups Efficient Class D amplification reduces distortion and lowers energy consumption when idle MA 1 FeaturesExceptional acoustic results for stereo home and professional studio setups Highest accuracy for tonality and impulse reproduction Purpose built for stereo pairs of Neumann studio monitors Correct your room with ease thanks to advanced calibration algorithms Developed by the world’s leading institute for audio signal processing (IIS) for the best monitor quality possible Easy to use software compatible with both Mac and PC No plug-in or special audio drivers required – everything is stored in the DSP-powered monitors for ease of use Optimised amplitude response and phase thanks to dedicated software Comes fully equipped with an individually calibrated measurement microphone KH 120-II Specifications Frequency Response: 44 Hz – 21000 Hz (±3 dB) Speaker Configuration: 1″ tweeter 5.25″ woofer Cabinet: Bass reflex Amplification: 100 W/145 W Analog Input: XLR Digital Input: S/PDIF (RCA) Colour: White Product Dimensions: 287 x 182 x 227 mm (11.3″ x 7.16″ x 8.94″) Net Weight: 5.4 kg (11 lbs 14 oz.) Power Consumption: 0.3 W (standby) 17 W (idle) 320 W (full output) Mains Power: 100 – 240 V; 50/60 Hz MA 1 Specifications Acoustical operating principle: Pressure transducer Directional pattern: Omnidirectional Frequency range: 20Hz – 20kHz Sensitivity at 1kHz into 1 kohm: 30 mV/Pa -30dBv +/- 3dB uncalibrated | 30 mV/Pa -30dBv +/- 0.5dB calibrated (via software) Rated impedance: 50 ohms Rated load impedance: 1000 ohms Equivalent noise level CCIR: 39dB Equivalent noise level A-weighted: 27 Db-A Maximum SPL for THD 0.5 : 132dB Signal-to-noise ratio CCIR (re. 94 dB SPL): 55dB Signal-to-noise ratio A-weighted (re. 94 dB SPL): 67 dB Maximum output voltage: 10dBu Supply voltage (P48 IEC 61938): 48V +/- 4V Current consumption (P48 IEC 61938): 3 mA Matching connector: XLR3F Weight: 37g Diameter: 23mm Length: 117mm Please note: The software requires Windows 10 64 Bit and ASIO driver or macOS 10.13/10.14/10.15 or 11.0.
CHECK PRICES AT ZZOUNDS
