The Mackie HRmk2 Series monitors are perfect for a wide variety of applications. Created with high definition audio in mind. The Mackie HR624mk2 produces such unbelievable sound quality it is THX pm3 approved. Ensuring an outstanding performance and sound quality that is ideal for any room or setup. Whether you require an ultra-accurate monitoring setup in your studio or premium surround sound for gaming or your home. The HR624mk2 will provide you with an optimal sound experience no matter what you are doing. Theres no need to settle for less the HR624mk2 has everything you need and more for exceptional sound design and enjoyment.
High-end sound reproduction The Mackie HR624mk2 Active Monitor surpasses the legendary performance of its HR predecessors to deliver improved sound quality. The precisely engineered curvatures of the one-piece cast aluminium Zero Edge Baffle minimises diffraction for a pristine image of your mix. Controlling sound waves so you get detailed lows full articulate mids and shimmering highs.
Containing separate onboard amplifiers for each driver onboard active crossovers and time-correction circuitry. The HR624mk2 ensures highs and lows reach your ears at the same time for a gorgeous all-consuming sound.
Superior design Boasting custom internal bracing within its beautiful wood cabinet the HR624mk2 has increased strength and rigidity. Entirely reliable no matter where you choose to put it. It also absorbs internal reflections and dampens standing waves inside the cabinet. An open-cell adiabatic foam material has also been strategically placed inside the box. Featuring a passive radiator instead of the port found on most speaker systems it is able to reproduce low frequencies with lower distortion and at a higher SPL. This monitor can promise you a crystal-clear sharp sound.
Specifications
Transducers
– Low Frequency:
– Diameter: 6.7 / 170mm
– Sensitivity: 89dB SPL (2.83V 1m)
– Nominal Impedance: 4 Ohms
– Voice Coil: 1.25 / 32mm
– Power Handling: 50W (Continuous) / 150W (Program)
– Frame: Die-cast magnesium
– Magnet: Ferrite
– Fully Shielded: Ferrite opposing magnet
– Frequency Range: 45Hz – 6kHz
– High Frequency:
– Sensitivity: 91dB SPL (2.83V 1m)
– Nominal Impedance: 6 Ohms
– Voice Coil: 1 / 25.4mm
– Diaphragm / Suspension: Titanium with polymer suspension
– Magnet: Neodymium
– Bucking Magnet: Ferrite opposing magnet
– Passive Radiator: 6 x 9 mass-loaded elliptical flat piston with variable thickness filleted edge rubber surround
– Crossover Type: Modified Linkwitz-Riley 24dB/octave at 3kHz
– Amplifier
– Low Frequency:
– Rated Power: 100W (at 1kHz with 1-percent THD)
– Rated Load Impedance: 4 Ohms
– Rated THD: 0.1-percent (1W to -1dB of rated power)
– Slew Rate: 15V/µS
– Distortion: Less than 0.0355-percent (THD SMPTE IMD DIM 100)
– Signal-to-Noise: Greater than 101dB (20Hz-20kHz unweighted referenced to 100W into 4 Ohms)
– Cooling: Convection
– Design: Monolithic IC Class AB Parametric Servo Feedback
– High Frequency:
– Rated Power: 40W (at 1kHz with 1-percent THD)
– Rated Load Impedance: 6 Ohms
– Rated THD: 0.1-percent (1W to -1dB of rated power)
– Slew Rate: 15V/µS
– Distortion: Less than 0.035-percent (THD SMPTE IMD DIM 100)
– Signal-to-Noise: Greater than 93dB (20Hz-20kHz unweighted referenced to 40W into 8 Ohms)
– Cooling: Convection
– Design: Conventional Class AB
– System Input Type: Balanced Differential (XLR and 1/4 TRS) Unbalanced (RCA)
– Input Impedance: Balanced: 20k Ohms Unbalanced: 10k Ohms
– Input Protection: RFI and Level protected
– Maximum Input Level: +20dBu
– Low Frequency Filter: 80Hz 2nd Order Butterworth
– HF EQ: Shelving +/-2dB at 10kHz
– Acoustic Space:
– A Position: -4dB at 50Hz shelving
– B Position: -2dB at 50Hz shelving
– C Position: Flat
– Compressor: Independent high and low-frequency overload detection
– Enclosure Alignment: 6th Order
– Over Excursion Prevention: 2nd Order HPF
– Low Line Voltage Shut Down: 60-percent of Nominal Line
– Thermal Protection: Amplifier Shut-Down Auto Reset
– Muting: 5 seconds at turn-on
– Signal Sense Threshold: -74dBu (0.155mV)
– Driver Protection: Independent LF and HF Detection Overall Compression
– Acoustics
– Free-Field Frequency Response: +/-1.5dB 49Hz to 20kHz
– Lower Cutoff Frequency: -3dB at 45Hz
– Upper Cutoff Frequency: -3dB at 22kHz
– SPL at 1m: 100dB SPL (-7.5dBu into balanced input)
– Maximum Peak SPL per Pair: 115dB SPL at 1m
– Maximum Short Term SPL on Axis: 106dB SPL at 1m (half space 80Hz to 2.5kHz)
– Residual Noise: Less than 8dB SPL at 1m (maximum gain 600 Ohm source 20Hz-20kHz bandwidth)
– Enclosure Construction: 3/4 (19mm) thick MDF cabinet with internal bracing
– Finish: Piano black gloss
– Wave Guide: Die-cast aluminium exponential wave guide
– Damping: Open cell adiabatic foam fill acoustical damping material
– Connectors: Flush-mount connector system
– Physical and Power
– Power Consumption:
– Standby Mode: 12W
– Idle: 20W
– Musical Program: 105W (loud mix)
– Resistive Loading into 1-Percent Clipping: 255W (LF 86W/4 Ohms HF 38W/8 Ohms)
– Voltage:
– US: 120VAC 60Hz
– Europe: 240VAC 50Hz
– Rated Power: 130W (for UL-6500 CSA-E65-94 EN-600065)
– Dimensions: 333mm x 219mm x 319mm / 13.1 x 8.6 x 12.6 (H x W x D)
– Enclosure Depth: 262mm / 10.3
– Weight: 10.6kg / 23.4lbs
– Product Code: 2034161-03
