The LD Systems MAUI 11 G2 Column PA System is a portable and advanced column PA system for live venues and events. A unique driver configuration consisting of three woofers eight full-range drivers and two tweeters are driven by an efficient 1000W (peak) Class-D amplifier. It delivers astounding sound quality for any situation all from a system that you can easily carry at the same time as your instrument. The MAUI 11 G2s powerful DynX DSP ensures that your sound remains free from distortion even at extremely high volume levels. The multiband limiter protects against overloading whilst an EQ compressor and 3-way crossover with run-time correction sculpt your sound for maximum performance. So no matter what you have plugged into the integrated 4-channel mixer (or connected via Bluetooth) you can be sure that its going to sound phenomenal. This bundle comes complete with a MAUI 11 padded slip cover for the subwoofer and a MAUI 11 column speaker bag. So you can keep your system safe whenever its not in use or during transport.
The sought-after seal of quality The Red Dot Product Design award. One of the most prestigious awards that can be bestowed upon any creation. Only products with a truly outstanding design can be given the Red Dot seal of quality. Thats because this system was designed for complete PA performance while making it easy to set up take down and move between venues. Sonically rich There are countless configurations when it comes to speakers and PA systems. It can be hard to figure out what you need for any given situation. But LD Systems have worked tirelessly to ensure that the MAUI 11 G2 delivers an incredible sound every single time you switch it on. A 1000W (peak) Class-D amplifier drives the MAUI 11 G2s unique driver configuration delivering clean efficient power with exceptional reliability. Three 6.5 woofers pump out tight defined and punchy low frequencies. Two 1 neodymium tweeters ensure that your highs are reproduced with absolutely no loss of detail. And eight 3 full-range drivers handle everything in between delivering a rich and warm mid-range. Connect with confidence Hook up your sound sources with ease. An integrated 4-channel mixer with line mix MP3 and Hi-Z inputs lets you connect everything from instruments to media players in seconds. You can even connect a wide variety of devices wirelessly via Bluetooth. Intuitive controls mean you can set the levels of your inputs as well as your system directly from the back of the system itself. Done with distortion? Youre not alone. Distortion can be a nightmare for any performer and its not always easy to get rid of. Until now. The Maui 11 G2 features powerful DynX® DSP that means your sound remains distortion-free even at the systems maximum volume. So your audience can hear every aspect of your sound with the upmost clarity. In the bundle LD Systems MAUI 11 G2 Column PA System LD Systems MAUI 11 Sub Padded Slip Cover LD Systems MAUI 11 Column Speaker Bag Features All-in-one column speaker for PA and monitor applications 1000W (peak) Class-D amplifier provides high power in a lightweight design Powerful bass reproduction with 3 x 6.5 LF woofers Balanced mid-range thanks to the 8 x 3 full-range speakers Precise and silky highs with 2 x 1 HF tweeters Increased range and wider coverage through the array arrangement Homogeneous dispersion pattern through a BEM-optimised tweeter waveguide Distortion-free sound even at the highest volume thanks to DynX® DSP technology Full control though a 4-channel mixer including Bluetooth® stereo audio streaming Two-piece column provides a compact transport solution for your system Secure plug-and-play connection thanks to the wireless multi-pin mechanism Wide range of application options through dismountable columns Easy operation with presets for mono or stereo configurations Specifications System Maximum SPL: 124dB (peak) Frequency Response: 50Hz – 20kHz Dispersion: 120° x 20° (H x V) Overall Height: 2030mm Weight: 24.9kg Product Code: LDMAUI11G2 Subwoofer Woofers: 3 x 6.5 ferrite magnets 1.5 voice coils custom-made Cabinet: 15mm plywood bass reflex design Finish: Textured paint Dimensions: 285mm x 650mm x 373mm (W x H x D) Weight: 16.9kg Mid/Hi System Midrange Transducers: 8 x 3 ferrite magnets 1 voice coils custom-made Tweeters: 2 x 1 neodymium magnets 1 voice coils custom-made Horn: Waveguide Loudspeaker Inputs: 1 x custom-made multipin Cabinet: Aluminium closed design Finish: HD coating Dimensions: 96mm x 620mm/730mm x 104mm (W x H x D) Weight: 2.6kg Amplifier Type: Class-D System Output: 500W (RMS) / 1000W (peak) Protection: DC protection Multiband limiter Short circuit Thermal overload Cooling: Covection Line Inputs: 2 x stereo (RCA XLR/6.3mm jack) Line Outputs: 1 x direct out (XLR) Mic Inputs: 1 (XLR/6.3mm jack) MP3 Inputs: 1 (3.5mm jack) Hi-Z Inputs: 1 (6.3mm jack) Loudspeaker Outputs: 1 x custom-made multipin DSP Characteristics: Bit Depth AD/DA Converter: 24-bit Internal Sampling Frequency: 48kHz Signal-to-Noise Ratio: 100dB Power Connector: IEC (power cable included) Voltage: 100-240V 50/60Hz (auto switching) Power Consumption: 11W (on) / 600W (max.)
CHECK PRICES AT ZZOUNDS