The Kenton GPIM16 GPI To MIDI Converter features 16 GPI inputs arranged on two 9 pin D sockets allowing it to output MIDI messages as notes controllers (CCs) or program changes. The Kenton GPIM16 is ideal for integrating your GPI-equipped devices with MIDI. The GPIM16 also features an edit mode which allows you to change the GPIM16 to receive and display different types of MIDI messages. Additionally the Kenton GPIM16 features a built-in MIDI analyser which allows users to see the types of MIDI messages being transmitted. The Kenton GPIM16 is a well-built MIDI utility box that allows your GPI-equipped devices to be easily integrated into MIDI setups.
GPI To MIDI The GPIM16 allows your GPI-equipped devices to be easily integrated into MIDI setups. The inputs are arranged with internal pullups so that shorting that input to ground will send the appropriate MIDI note-on message and releasing the short to ground will send a note-off message. Features 16 input GPI to MIDI converter 16 GPI inputs (general purpose interface) arranged on two 9 pin D sockets Each block of 8 inputs can be assigned a starting MIDI note number and subsequent inputs follow on consecutive note numbers (default for first block 36 – 43 for second 44- 51) Each block of 8 inputs can be set whether note offs are sent when the switches open. NB off messages do not apply to program changes The MIDI transmit channel for all inputs can be set (range 1 to 16 default =1). The debounce value for all switch inputs can be set (range 1 to 100ms – default = 10ms) D socket inputs are arranged with pins 1 -8 as inputs (or 9 -16) and pin 9 as ground 2 MIDI out sockets that both carry identical MIDI information. MIDI arriving at the MIDI input is merged with the data generated by the switch inputs and sent to the MIDI outs Unit is supplied complete with a switch mode multi-region power supply with locking connector Editing of parameters is achieved by use of push buttons in conjunction with the LED display In order that settings cannot be accidentally changed edit mode can only be enabled using a recessed push buttonSpecifications Display: 3 x 7 segment display Dimensions: 190 x 110 x 38mm Weight: 0.8kg (including PSU) MIDI: In Out1 & Out2 (out1 & out 2 give the same data out) Inputs: 16 GPI – 8 on each of 2 x 9 pin D sockets – pin 9 common ground
CHECK PRICES AT ZZOUNDS
