The JBL JRX215 15 Passive PA Speaker is smarter than your average speaker. With a host of frequency response shaping features it delivers punchy bass ample mid range performance and detailed high end. Heavy duty electrical components and 250 watts of power handling ensure ample headroom. You can push the JRX215 pretty far without fear of distortion. The tweeter is equally robust with a SonicGuard&trade protection system letting you mix great sound all the way up to 18 kHz.
Robust enclosure for sound you can trust Constructed from 19 MDF using state of the art adhesives and assembly techniques the enclosure is reliable and acoustically superior to many others. A dual angle pole mount lets you mount the speaker straight or to tilt it by 10°. The carry handles are completely non-resonant so you can carry the speaker easily without it affecting your sound. Advanced speaker constructions A JBL 15″ woofer with edge wound ribbon voice coil delivers a punchy and defined low/mid frequency response whilst a JBL 1″ exit compression driver horn reproduces high frequencies with absolute clarity. The JRX215 incorporates an advanced cross-over design to ensure maximum dynamic headroom tailoring the frequency response for optimum audio coherence. A Progressive Transition wave guide provides superior high frequency coverage control with reduced distortion and a smoother response. Sonic Guard technology helps to protect the HF driver from any signal spikes or overloading.The JBL JRX215 is the perfect choice when looking for a passive speaker that offers clear audio reproduction alongside JBL reliability. Features BL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver Advanced network topology crossover design shapes frequency response and delivers “coherent summation” High power rated crossover circuit Progressive Transition high frequency waveguide provides superior coverage control reduced distortion and smoother frequency response. The rugged acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant all-steel handles are used Attractive 18-gauge hexagon perforated steel grille protects components from damage Dual-angle pole-mount socket allows the speaker to tilt 10 degrees for more uniform audience coverage Specifications Power Rating: 250 W / 1000 W Frequency Range (-10 dB): 41 Hz – 18 kHz Frequency Response (±3 dB): 59 Hz – 13 kHz Sensitivity (@1m): 99 dB SPL (1w/1m) Nominal Impedance: 8 ohms Recommended Amplifier Power: 250 W to 500 W into 8 ohms Maximum SPL: 129 dB Nominal Dispersion: 90 x 50 Crossover Frequency: 2.2 kHz Dimensions (H x W x D): 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in) Weight: 27.4 kg (60.5 lb) High Frequency Driver: JBL 2414H-C 1″ exit Low Frequency Driver: JBL M112-8 Input Connectors: Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel Grille: 18-gauge powder-coated steel Mounting & Suspension: 36 mm dual-angle pole-mount socket
CHECK PRICES AT ZZOUNDS