Choose clarity. Get crisp audio no matter what your sonic environment. With the Electro-Voice RE3-ND96 Single Handheld Wireless Mic Set, you’ll stun your audiences with sonic clarity every time. Outstanding speech intelligibility is achieved by the ND96 capsule. Whether you’re speaking or singing your heart out, capture every detail every time with outstanding clarity.
Low noise personalized response. Optimize your sound for every performance. The mic capsule features several different selectable responses. This means you can choose the presence tuning which suits your voice or environment. Get great results wherever and whoever you are.
Handling noise is reduced by the shock mounting of the mic capsule. So even if you do get carried away in a performance or impassioned speech, your vocal channel will be kept clear of noise from bumps and knocks. Off-axis noise sources are also rejected by the supercardioid polar pattern, so you can have total peace of mind. Never worry about noise again.
Easy setup, simple connection. Component synchronization is just seconds away. All you need to do is use the included sync function on the transmitter and receiver, and you’ll be ready to perform in seconds. Cut down on set-up times and get straight to your performance. You can even check what frequencies are available in your environment with the receiver’s channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference or at locations such as festivals where many people might be using a wireless set.
Durable design in every component. Every component of the Electro-Voice RE3-ND96 Single Handheld Wireless Mic Set is designed to be durable and give you great sound for years to come. The mic capsule is protected by an extremely dent-resistant memraflex grille which protects the internal components and your professional appearance. The transmitter and receiver are both housed in robust metal bodies which can withstand regular and rigorous use.
Features:
– Frequency scanning lets you ensure there are free frequencies
– Sync function lets you connect transmitter and receiver in seconds
– Shock-mounted capsule greatly reduces handling noise during performance
– Excellent speech intelligibility thanks to the large diaphragm
– Robust construction throughout with metal bodies and dent-resistant grille
What’s in the box?
– ND96-RC3 Wireless Head with ND96 Capsule
– RE3-HHT Handheld Transmitter
– RE3-RX Diversity Receiver
– Microphone stand adapter
– Two receiver antennas
– Universal power supply
– Two AA batteries
– Receiver rack mounting hardware
– Owner’s manual
– Documentation packet
Specifications:
RE3-RX RE3 receiver
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic 40 kHz
– Diversity: Antenna diversity
– Bandwidth: 36MHz
– Signal/Noise ratio: >100dB(A)
– Total harmonic distortion (THD): <0.6-percent at 1kHz
– Receiving sensitivity: -81dBm for -12dB SINAD
– Frequency response: 63Hz-16kHz±2dB (BPT) 51Hz-16kHz±2dB (HHT)
– Antenna type: Detachable 1/2 wave with BNC connector
– Antenna booster power: DC12 – 15V/100mA
– Function display by: LCD
– Control functions: Power, scan, frequency group, channel squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
– Sync data options: Frequency group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
– Audio frequency output impedance: 240 Ohms (unbalanced), 1400 Ohms (balanced)
– Squelch and noise muting: Noise muting and tone code locking
– Output ports: 1 x balanced XLRM jack, 1 x unbalanced 1/4 TS (6.3mm) jack
– Power supply: DC12-15V/500mA
– Finish: Black polyurethane paint
– Dimensions: 47 mm x 210 mm x 175 mm
– Net weight: 1.23 kg
– Gross weight: 1.49 kg
RE3-HHT RE3 handheld transmitter
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic
– RF power output: 5L (488-524MHz) 10mW
– Display by: LCD + LED
– Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock.
– RF stability: <±10kHz at Fc
– Modulation frequency shift: Wideband FM ±48kHz deviation
– Harmonic radiation: <-50dBc
– Battery: 2 x AA alkaline battery or NiMH rechargeable battery
– Charging contacts: Yes
– Microphone coupling: 1.25 diameter 28 UN-2A thread pitch
– Microphone electrical contact: 3-ring/3-pin
– Finish: Black polyurethane paint
– Height: 191mm
– Width at threaded end: 37mm
– Width at control cover: 22mm
– Net weight (without head): 346 g
– Gross weight (without head): 480 g
ND96-RC3 wireless mic head with ND96 capsule
– Element type: Dynamic neodymium magnet structure
– Frequency response close: 30 Hz-15 kHz
– Frequency response far: 140 Hz-15 kHz
– Polar pattern: Supercardioid
– Sensitivity open circuit voltage at 1 kHz in flat position: 4.7 mV/Pascal(-46.5 dBV/Pa)
– Sensitivity open circuit voltage at 1 kHz in vocal presence position: 3.2 mV/Pascal (-50 dBV/Pa)
– Maximum SPL: 136.5 dB SPL (1-percent THD)
– Impedance: 1000 Ohms
– Power requirements: 4-8 VDC
– Polarity: Positive pressure on diaphragm produces positive voltage at center contact relative to ground contact
– Electrical contact: 3-Ring/3-Pin
– Threaded coupling: 1.25 diameter 28 UN-2A thread pitch
– Finish: Black polyurethane paint
– Materials: Aluminum, steel, steel wire grille screen
– Length: 83.5 mm
– Diameter: 50.5 mm
– Net weight: 193 g
– Shipping weight: 247 g
