Great speeches deserve to be heard. Bring crisp, immaculate sound to your performances with an Electro-Voice RE3-BPOL Single Omni Lavalier Wireless Mic Set. When you’re giving a speech, every word is important. So choose a wireless system that will capture every word in superb detail.
Setting up couldn’t be easier with channel scan and synchronization functions. You’ll be up and running in no time. Once you’re set up, the lavalier microphone delivers great sonic results with an omnidirectional polar pattern. This ensures a natural and airy sound.
Easy setup and simple connection. Component synchronization is just seconds away. All you need to do is use the included sync function on the transmitter and receiver, and you’ll be ready to perform in seconds. Cut down on setup times and get straight to your performance.
You can even check what frequencies are available in your environment with the receiver’s channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference, or at locations such as festivals where many people might be using a wireless set.
Features:
– Frequency scanning lets you ensure there are free frequencies
– Sync function lets you connect transmitter and receiver in seconds
– Excellent speech intelligibility thanks to high-quality mic capsule
– Robust construction throughout with metal bodies on each component
– Two frequency bands in one system – great if you need a license or license-free
In the box:
– HW3 Supercardioid Headworn Microphone
– RE3-BPT Bodypack Transmitter
– RE3-RX Diversity Receiver
– Two receiver antennas
– Universal power supply
– Two AA batteries
– Receiver rack mounting hardware
– Owner’s manual
– Documentation packet
Specifications:
[RE3-RX] RE3 receiver
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic 40 kHz
– Diversity: Antenna diversity
– Bandwidth: 36MHz
– Signal/Noise ratio: >100dB(A)
– Total harmonic distortion(Thd): <0.6% at 1kHz
– Receiving sensitivity: -81dBm for -12dB SINAD
– Frequency response: 63Hz-16kHz±2dB (BPT), 51Hz-16kHz±2dB (HHT)
– Antenna type: Detachable 1/2 wave with BNC connector
– Antenna booster power: DC12 – 15V/100mA
– Function display by: LCD
– Control functions: Power, scan frequency group, channel squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset
– Sync data options: Frequency group, channel, sensitivity level, attenuation status, RF power auto off status, key lock status, transmitter display (freq or Gp/Ch)
– Audio frequency output impedance: 240Ω (unbalanced), 1400Ω (balanced)
– Squelch and noise muting: Noise muting and tone code locking
– Output ports: 1 x balanced XLRM jack, 1 x unbalanced 1/4" TS (6.3mm) jack
– Power supply: DC12-15V/500mA
– Finish: Black polyurethane paint
– Dimensions: 47 mm x 210 mm x 175 mm
– Net weight: 1.23 kg
– Gross weight: 1.49 kg
[RE3-BPT-8M] Bodypack transmitter
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic
– RF power output: 10mW
– Display by: LCD + LED
– Function controls: Power mute group channel frequency, sensitivity adjustment, input level attenuation, RF power auto off, key lock
– RF stability: <±10kHz at Fc
– Modulation frequency shift: Wideband FM ±48kHz deviation
– Harmonic radiation: <-50dBc
– Input jack: 4-pin mini jack
– Battery: 2 x AA alkaline battery or NiMH rechargeable battery
– Charging contacts: Yes
– Finish: Black polyurethane paint
– Dimensions (without antenna): 81.5mm x 64.5mm x 25mm
– Net weight: 0.174 kg
– Gross weight: 0.235 kg
[RE3-ACC-OL3] Omnidirectional lavalier mic with TA4F
– Element type: Self-biased condenser
– Frequency response: 60 Hz – 15 kHz
– Polar pattern: Omnidirectional
– Sensitivity open circuit voltage. 1 kHz: 17.5 mV/Pascal (-35 dBV/PA)
– Maximum SPL: 130 dB SPL
– Impedance: 2200 ohms
– Power requirements: 3-9 VDC
– Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
– Electrical contact pinouts: Pin 1 – Ground shield, Pin 2 – Audio, Pin 3 – Bias voltage, Pin 4 – N/C
– Cable length: 1450 mm
– Head length: 9.2 mm
– Head diameter: 5 mm
– Net weight: 17.5 g
– Shipping weight: 175 g
– Microphone connector: 4-pin mini plug
– Head finish: Non-reflecting black
– Material: Brass steel wire cloth grille, black flexible PVC cable
