Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input Band 8M

zZounds

Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input Band 8M
Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input Band 8M

Freedom on stage. Performance the way it’s meant to be. Give your audiences the show they deserve with an Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input. You’ll get the best possible sound. Audiences won’t be able to tell the difference from a wired connection, but for performers, the freedom will be unmissable.

Audiences and performers will both feel the benefit of a great live show. No input device is included, so you can use your own favorite compatible lavalier mic, headworn mic, or compatible cable.

Easy set up, simple connection. Component synchronization is just seconds away. All you need to do is use the included sync function on the transmitter and receiver, and you’ll be ready to perform in seconds. Cut down on set up times and get straight to your performance. You can even check what frequencies are available in your environment with the receiver’s channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference or at locations such as festivals where many people might be using a wireless set.

823 – 832MHz and 863 – 865MHz wireless bands. The 863 – 865MHz band is license-free across most of Europe, ideal for any small-scale application such as bands or public speakers who just need one channel without paying a license fee. For larger organizations or applications where a license may be required for insurance or other monitoring purposes, licenses for the 823 – 832 MHz band are available from local authorities in many countries. Please see the attached PDFs for further licensing information. In every case, this information acts only as a guide. Please contact your local licensing authority if you require a license or further information on licensing in your area.

Features:
– Frequency scanning lets you ensure there are free frequencies
– Sync function lets you connect transmitter and receiver in seconds
– Robust construction throughout with metal bodies throughout
– Two frequency bands in one system – great if you need a license or license-free

What’s in the box?
– RE3-BPT Bodypack Transmitter
– RE3-RX Diversity Receiver
– Two receiver antennas
– Universal power supply
– Two AA batteries
– Receiver rack mounting hardware
– Owner’s manual
– Documentation packet

Specifications:
RE3-RX RE3 receiver
Frequency oscillation mode: Phase-locked loop (PLL)
Sync frequency: Ultrasonic 40 kHz
Diversity: Antenna diversity
Bandwidth: 36MHz
Signal/Noise ratio: >100dB(A)
Total harmonic distortion(Thd): <0.6% at 1kHz
Receiving sensitivity: -81dBm for -12dB SINAD
Frequency response: 63Hz 16kHz±2dB (BPT) 51Hz 16kHz±2dB (HHT)
Antenna type: Detachable 1/2 wave with BNC connector
Antenna booster power: DC12 – 15V/100mA
Function display by: LCD
Control functions: Power scan frequency group channel squelch TX sensitivity TX attenuation TX RF power TX auto off TX key lock TX display info TX sync configuration RX output volume RX output level RX antenna booster power RX key lock RX display contrast RX display brightness RX system reset.
Sync data options: Frequency group channel sensitivity level attenuation status RF power auto off status key lock status transmitter display (freq or Gp/Ch)
Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced)
Squelch and noise muting: Noise muting and tone code locking
Output ports: 1 x balanced XLRM jack 1 x unbalanced 1/4″ TS (6.3mm) jack
Power supply: DC12 – 15V/500mA
Finish: Black polyurethane paint
Dimensions: 47 mm x 210 mm x 175 mm
Net weight: 1.23 kg
Gross weight: 1.49 kg

RE3-BPT-8M Bodypack transmitter
Frequency oscillation mode: Phase-locked loop (PLL)
Sync frequency: Ultrasonic
RF power output: 10mW
Display by: LCD + LED
Function controls: Power mute group channel frequency sensitivity adjustment input level attenuation RF power auto off key lock.
RF stability: <+/-10kHz at Fc
Modulation frequency shift: Wideband FM +/-48kHz deviation
Harmonic radiation: <-50dBc
Input jack: 4-pin mini jack
Battery: 2 x AA alkaline battery or NiMH rechargeable battery
Charging contacts: Yes
Finish: Black polyurethane paint
Dimensions (without antenna): 81.5mm x 64.5mm x 25mm
Net weight: 0.174 kg
Gross weight: 0.235 kg


CHECK PRICES AT ZZOUNDS