Freedom on stage. Performance the way it’s meant to be. Give your audiences the show they deserve with an Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input. You’ll get the best possible sound. Audiences won’t be able to tell the difference from a wired connection, but for performers, the freedom will be unmissable. Audiences and performers will both feel the benefit of a great live show. No input device is included, so you can use your own favorite compatible lavalier mic, headworn mic, or compatible cable.
Easy set up, simple connection. Component synchronization is just seconds away. All you need to do is use the included sync function on the transmitter and receiver, and you’ll be ready to perform in seconds. Cut down on set up times and get straight to your performance. You can even check what frequencies are available in your environment with the receiver’s channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference or at locations such as festivals where many people might be using a wireless set.
Features:
– Frequency scanning lets you ensure there are free frequencies
– Sync function lets you connect transmitter and receiver in seconds
– Robust construction throughout with metal bodies throughout
– Two frequency bands in one system – great if you need a license or license-free
What’s in the box?
– RE3-BPT Bodypack Transmitter
– RE3-RX Diversity Receiver
– Two receiver antennas
– Universal power supply
– Two AA batteries
– Receiver rack mounting hardware
– Owner’s manual
– Documentation packet
Specifications:
RE3-RX (RE3 receiver)
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic 40 kHz
– Diversity: Antenna diversity
– Bandwidth: 36MHz
– Signal/Noise ratio: >100dB(A)
– Total harmonic distortion(Thd): <0.6% at 1kHz
– Receiving sensitivity: -81dBm for -12dB SINAD
– Frequency response: 63Hz – 16kHz ±2dB (BPT) 51Hz – 16kHz ±2dB (HHT)
– Antenna type: Detachable 1/2 wave with BNC connector
– Antenna booster power: DC12 – 15V/100mA
– Function display by: LCD
– Control functions: Power, scan frequency group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
– Sync data options: Frequency group, channel, sensitivity level, attenuation status, RF power auto off status, key lock status, transmitter display (freq or Gp/Ch)
– Audio frequency output impedance: 240Ω (unbalanced), 1400Ω (balanced)
– Squelch and noise muting: Noise muting and tone code locking
– Output ports: 1 x balanced XLRM jack, 1 x unbalanced 1/4" TS (6.3mm) jack
– Power supply: DC12-15V/500mA
– Finish: Black polyurethane paint
– Dimensions: 47 mm x 210 mm x 175 mm
– Net weight: 1.23 kg
– Gross weight: 1.49 kg
RE3-BPT-8M (Bodypack transmitter)
– Frequency oscillation mode: Phase-locked loop (PLL)
– Sync frequency: Ultrasonic
– RF power output: 10mW
– Display by: LCD + LED
– Function controls: Power, mute, group, channel, frequency sensitivity adjustment, input level attenuation, RF power auto off, key lock.
– RF stability: <±10kHz at Fc
– Modulation frequency shift: Wideband FM ±48kHz deviation
– Harmonic radiation: <-50dBc
– Input jack: 4-pin mini jack
– Battery: 2 x AA alkaline battery or NiMH rechargeable battery
– Charging contacts: Yes
– Finish: Black polyurethane paint
– Dimensions (without antenna): 81.5mm x 64.5mm x 25mm
– Net weight: 0.174 kg
– Gross weight: 0.235 kg
